Hey guys i have just installed a vt v6 in my old transit van and was wondering how important the road speed value the pcm sees is. I am using a god as a speedometer but the real value from the pcm is much higher. I am assuming it’s something to do with a differential value. Is important to change th...

Ok cheers guys i will just live with it.

No codes are logged. I still am thinking its a tune thing as there are lots of posts about it.

Yeah factory everything still. The fist thing I did was remove cleaned and spit on all the usual culprits then i started to do some research and apparently it is a normal condition? i am not a fan

Hi all, I have rev hanging when changing gears in my VY manual V6 eg. when i push the clutch in and let off the throttle it stays around 3000rpm (sometimes slightly increasing) and doesn't drop until i change. After lots of reading it appears this is normal and possibly done for emissions. I was won...

also does set mean enable or disable when i want to change the DTC92 - Low Speed Fan Communication Failure

Will i need to change the checksum before i burn it or does the xdf calculate this correctly?

will that be ok for the vt v6 pcm?

Hey guys i have poured over every post on here trying to find the answer but i still cannot work it out. I have put a VT V6 in my old ford transit van and now i am up to the point of making a modified chip to get her running. My original memcal is CJKU1912 $A5C and i am using the VT V6 V1.1 $A5C.xdf...

Swweet!!