thanks mate

I ended up with some 42lb injectors tuning it on 12p
trying e70 atm does anyone know what stoich is for e70
is it worth modifying the afr tables to suit as atm they are for e85.

where did you get the test tube from ?
looks like ive maxed my injectors 28lb from vy maloo ute
so will 42lb be enough or go to 60lb?
also detsroyed my starter motor,it stripped the teeth off
the plantery gear inside the starter,never ends

thanks guys lengends working on the tune atm,it starts and goes ok
need to get some more fuel!

hi guys im about to try e85 in my 355 runs 12.1 comp etc
i need a few pointers on modifying the afr tables and anything else maybe?
stoich i know is 9.76 thereabouts so to modify afrs subtract the dif from
petrol afr 14.7 =4.94.
correct me if im wrong

thanks tried it today worked perfect

hey guys got another question
i want to burn a 32k bin to 64k chip
but not sure on the offset
file offset has 000000 and device offset 000000
i seen its 8000 but not sure wich to set???
never done it before.

you can delete this one,ecu must be gone
tried a vs v8 man tune today ran but was like it was going into limp mode but no cel
barely ran then just stalled.
tried the 808 and ran sweet.not having much luck bought another one a vr v8 man
'ecu and got ripped its got an 808 board in it

Cool wasnt sure if 12p would work or not
ill try it out.thanks again!

looking at this tune capa 2 bar tune and wondering if this 2 bar xdf is correct
the injector rate is showing 110.95 mgrams/sec
usually its eg 0.14 in grams a sec
i want injector rate of 0.42 but not sure how to work it out
they are 53lb injectors btw that i want to use.