when it runs rich for so long it'l kill the o2's quick.

hows your engine mounts? These can cause issues with vibration and knock detection, also non oil filled ones can do it to. A lumpy Cam or noisy valvetrain can also do it.

There is settings to numb the knock aggression down a bit. Ignore time from memory.

ive never had much luck with bosch o2 sensors for narrowbands, especially in commo's, dephi's work much better and have good response time.

Ive had several bosch's out the packet do the same slow response as your seeing.

vp304 wrote:I thought there was people fixing these up already or are they just using good 2nd hand lcd's and pulling out your old dud lcd's ?
MY middle one is starting to die and is doing my head in

Ive heard of it but yet to see new lcd's.

From what i understand the PCF2100 is a parallel lcd driver? So it's like 7 segment displays i think? So one pin would control for example the ODO to light up, another pin would control the L/100 to light up, then the digits like a normal segment displays. So that makes the LCD specific to the appli...

Anyone thought about starting to look at a way to replace the lcd's in these clusters? A lot are dead now days and they are specific even to the placement, left, middle, right lcd's can only be used in that spot. Ive looked at the board and it's driven by a 80C51B Processor. The 3 LCD's have their o...

could be connections, could be the cable is too long. Most of the pins should be available on that 2 row header at the bottom of the pic. It'd be a pain in the butt, but you could scratch the coating off the top of them and check each of the necessary pins on the ostrich end is present on one of th...

i bought 2 of those plcc to dip adapters i just checked mine and it's def 1:1 pin.

was 1:1 when i checked and standard memcal let me datalog on bench. But pays for you to check to.

nice find guys, should be cheaper to do now!