Hi guys , probably a silly question but I'm at the stage of modding the pcm for real time with nvram and removing the 1k pull up resistor for the wideband, in instructions it says to just remove the resistor , do I also bridge the the spots on the board with solder to link them back up or just remov...

All good Cheers Antus , makes sense now . Looking forward to getting it done .

Have a read of the pdf file included in the 11P zip. It tells you the dedicated pin for the wideband analog output (analog 1 for the LM2), and a small mod if there is an offset of readings. Its not the injector monitor. ok so D8 is it which is a spare, cheers vl400 think ive got my head around sett...

Its usually the injector voltage monitor line that gets replaced with the 0-5v wideband ouput so would i be able to run an extension wire with a terminal from the injector voltage monitor pin then connect to the analogue out for the wideband from the lm2 box?, I don't want it to be a permanent setu...

has anyone integrated a wide band into their computer for tuning using $11p on a 424 ? i have an innovate lm2 and would like to try and use it to help tune my vr , been scanning through the forums but couldn't find much . the lm2 does have analogue outs on the control box, would it be easier to run ...

awesome thanks for the help guys, looks like the ve table starts at 0049c can anyone confirm?

I took another reading as a 27c256 with offset 6000 and tried to open it with $12 and some data is looking pretty good, still not perfect.

ok 29c512 with 7000 offset I got this

Definitely a weird one never seen one like it , I've tried different ways to read the bin file sizes etc but I only get blank reads unless it's set to 27c128.

pic of the memcal