First thing I thought it may have been was low fuel pressure caused by either hot wires or bad regulator... went out and bought all the efi fuel pressure testers and all looks good. I mucked about with this same table last summer and it seemed to help with the leanout apon a hot restart. If I drive ...

Hi, Heat soak engine still running lean after hot restart. vn v8. with delco 808. $12P I changed the figures in this table as shown and it seems to fix the problem. It's more evident lean hunt at idle and just above idle. What is this table actually doing to richen the mixture? am i on the right tra...

I've wondered about one of those hydrogen bubble generators... it might work a small amount if you built a steam generating heat exchanger around the exhaust system to run a small steam engine in the boot that spun a generator to power the hydrogen bubbler... then you'd have the extra weight to haul...

Hi Guys, When I busted the th700 at the drags back in Feb, I ended up rebuilding the entire thing and modifying it heavily to take the torque of the turbo engine. As I rebuilt the trans I took about 550 pictures and wrote up a very detailed How to rebuild th700r4 thread on another forum and thought ...

Running the 808 with delcohacking Nvram mods and th700r4 transmission.

couple vids at the 1/8 mile.
http://youtu.be/HebhihWjkPg

http://youtu.be/SE-u-u5te4k

Ring Pat gardner from v6 conversions in Moree and say... Hi Pat, I want to buy one of your speed sensors for my hilux v8 conversion and while your there... send me your wiring harness for the 304 too please. You can thank me later....

I haven't been on here for a while. Whats the go with the upgraded username? What did I miss? "T"

I ust opened a stock tune bin and clicked select all on 0-100kpa map and "copy" as soon as try to copy the map is closes the program..? That stock timing map looks a bit inconsistent. there is 35 siting right next to 27... :wtf: I thought it was supposed to go gradually and smooth? (maybe ...

I'm running 28 because i don't know what the motor wants and 28 just seemed like a nice number....

without a dyno how are you supposed to know what timing to give it?

Hi guys, I rang 2 dyno shops and after telling them the combo, one said he doesn't know how to use the ose12p and declined my offer to sit in the car with him to show him how to use my laptop. The other shop was too scared to even touch it. :mrgreen: I have just got my car back on the road after a t...