whats the easiest way to take the spark & VE tables from a standard bin & install them to another ? Or do I have to type them individually. Use the compare function in tunerpro. Load up a standard bin into a one of the 4 comparison slots, then open the table, click compare and the compariso...

delcowizzid wrote:will be running on the 7psi wastegate spring for a few weeks till i wire in a boost solinoid then shes upto 14 psi

That should see you in the order of 350+hp?

How much boost are you planning on pumping through the old girl?

Any target output?

I don't know of any 2Bar $11 code, you'll have to make do with loosing resolution in the standard $11 program. Assuming you have put in a 2bar sensor, all the tables that reference MAP will now be screwy, but you can chnge that: for example, F1 SAMAIN shows MAP as 20 30 40 50 60 70 80 90 100 Putting...

Stock cam in anything seems to be happy with a much wider AFR and timing range. A popular suolution that can be employed in EFILive and HPTuners for LS1s is TPS based fuelling for upto a given RPM, say 2000 for large cammed engines where the low speed MAP resolution isn't so fine. Is that an even mo...

Im planning a rodeo 4ze1 2.6L project at the moment and have found the original tan coloured injectors are bosh 280150706, the multimeter said they are 16ohms and from that reference table the flow rate is 20.7 lbs/h @36.3psi which is the cars idle pressure. The reg is rising rate, and it'll go up ...

What you want is exactly they way I have gone. I'm using it on a VR auto atm.

A USB comms board, and NV Ram option from VL400. Parts are listed in the for sale section.

darcy

When I open that in Tunerpro, it has $A5 mask.

Looks correct with a $A5 xdf loaded too. That would explain why it doesn't look right if viewed with $5D xdf.

I'd say theres nothing wrong with the programmer. It ran fine as it's a valid bin, just not an $5D bin.

Looking good 202.
Should be a fair a rocket a Torana weight.

Is it possible to adopt MAP based code on an ecotec without changing ECU in VS?

Holden202 wrote:now we just need the xdf's labelled with the right variant in their names

What variants are teh 2 posted in the xdf thread?