yeah i'd love to give one a try!

thats definitely a very odd one!

its not spinning the tyres at that point ? do you have a data log of the ecu to see if the speed spikes or something ?

at the end of the day i guess it doesnt really matter what the spring is as long as its within spec of what you need.... for example, more coils in a spring will make it have more leverage over the load applied to it, so it would be softer than one with less turns. On the same token, thicker wire di...

yeah thats probably a good idea, but unfortunately out of my coding ability - also for me when racing i use data logging on every run, so would need to use the serial comms for that. as for the testing, i see no reason why it couldnt work with your low psi ... even control from 5-10 would prove it d...

ok so now the long story! probably like everyone, i've always wanted to do proper boost control with the delco, but sadly it just doesnt have the coding to do so. So totally un-related to this, when building the FX i got myself a vacuum pump from a Holden, and plumbed that into my brake booster, all...

I’ll post more info later when I’m at a computer, I have made a pcb to do exactly this, uses a flex table to produce a pwm into an Arduino along with a map sensor and then a pid controller to control a high current output to drive the mac valve

Thought i should post up a bit of an update on where im at as far as post racing changes/improvements etc First thing i wanted to do was to add a vent from the sump to the catch can, as i was getting a bit of oil out the dipstick tube, this was probably partially as the seal on them is not real flas...

hahaha no its viking :) i did look at kings catalogue, but it basically tells you what you need for model xx car, doesn't have any info on dimensions of the actual spring ..... that said i have found QA1 - 8MB375 and Afco - A8SR375 which are 8 inch, 375lb springs, it appears these are a mustang conv...

Thanks Gareth, i have emailed viking directly to see if they have an option .... I'd probably not waste your time looking till i get word back from viking as they might well have an off the shelf option for me. 2022-04-14_10-30-03.jpg this is what i have now (part # 9TP350), ideally if you could get...

so after a bit of a break from the car after Gunnedah event i have started to put together a list of improvements / changes i want to do. so first thing was i have constantly had oil leaks from the trimatic pan, and the main cause of this is the pressed steel pan rail, it just cuts the gasket if you...