That is COOL
Donkey could go one of them
| bellett.net http://delcohacking.net/forums/ |
|
| The 'ultimate gear shift lever' http://delcohacking.net/forums/viewtopic.php?f=36&t=3510 |
Page 1 of 1 |
| Author: | Glenn [ Sun Nov 05, 2017 12:10 am ] |
| Post subject: | The 'ultimate gear shift lever' |
https://youtu.be/DG12jmFsI7M |
|
| Author: | Stickman [ Mon Nov 06, 2017 2:38 am ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
That is COOL Donkey could go one of them
|
|
| Author: | Glenn [ Mon Nov 06, 2017 3:59 am ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
Stickman wrote: That is COOL Donkey could go one of them Oz made too, so they could do a Bellett 'special' no doubt...... mind you, cost isn't mentioned........ |
|
| Author: | PR91 [ Tue Nov 07, 2017 1:39 pm ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
Complete waste of money on a Bellett. $$$$ is far better spent on making better ratios and faster shifting inside the box (dog box with straight cut gears and no synchros) thana shifter that just connects to slow changing internals and crap ratios that are far too big a jump between them to work properly. |
|
| Author: | Glenn [ Tue Nov 07, 2017 8:47 pm ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
PR91 wrote: Complete waste of money on a Bellett. $$$$ is far better spent on making better ratios and faster shifting inside the box (dog box with straight cut gears and no synchros) thana shifter that just connects to slow changing internals and crap ratios that are far too big a jump between them to work properly. don't take things too seriously Brett. It was put up in humerous intent. We all know the limitations of a Bellett g'box. |
|
| Author: | PR91 [ Tue Nov 07, 2017 9:34 pm ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
Limitations that become far worse when you race with any Isuzu box. Believe me. You see the price of that shifter too..... Bloody hell. |
|
| Author: | Glenn [ Wed Nov 08, 2017 3:03 am ] | ||
| Post subject: | Re: The 'ultimate gear shift lever' | ||
PR91 wrote: Limitations that become far worse when you race with any Isuzu box. Believe me. You see the price of that shifter too..... Bloody hell. I imagine though getting a special gear set cut for a Bellett box would be super expensive. I see though that you can buy a 'short' 5 speed from Tremec with various ratios and looks pretty small, so might fit. Of course this wont be cheap either plus an adapter or new bell housing would be needed. The old adage, speed costs money etc applies.........
|
|||
| Author: | Stickman [ Wed Nov 08, 2017 9:06 pm ] |
| Post subject: | Re: The 'ultimate gear shift lever' |
I for one couldn't give a crap about the practicality or sense of a shifter like this......... it would just be hell cool to have anyway 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|