Or, NZ Gaskets VRS Gasket set part no V2032KC (incorrectly labeled as G200Z, when it is most definately G200W) are suitable, if you can find one. I used one of these sets on mine yesterday and it all fitted
| bellett.net http://delcohacking.net/forums/ |
|
| g200w headgaskets http://delcohacking.net/forums/viewtopic.php?f=36&t=714 |
Page 1 of 1 |
| Author: | Waldo [ Sun Jan 03, 2010 12:09 am ] |
| Post subject: | g200w headgaskets |
does anyone know where i can buy g200w twincam headgaskets from or complete gasket kits? |
|
| Author: | antus [ Mon Jan 25, 2010 5:03 am ] |
| Post subject: | Re: g200w headgaskets |
Looks like they are making some MLS head and exhaust gaskets here. I only just noticed this, so hope its still going ahead. http://www.ozgemini.com/forums/non-tech ... 37&start=0 |
|
| Author: | antus [ Mon Jan 25, 2010 5:06 am ] |
| Post subject: | Re: g200w headgaskets |
Or, NZ Gaskets VRS Gasket set part no V2032KC (incorrectly labeled as G200Z, when it is most definately G200W) are suitable, if you can find one. I used one of these sets on mine yesterday and it all fitted
|
|
| Author: | gt orphanage [ Mon Jan 25, 2010 10:09 am ] |
| Post subject: | Re: g200w headgaskets |
specialized gaskets will make them if you have the old one for a sample i get them made for a pajero v6 twice the thickness to decompress them. He charges $220 for a pair.If you have a sample gasket i would get a some also?They are near acl gaskets on the northern end of the gateway bridge. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|