WANTED
GT EXTRACTORS 1967
GOOD CONDITION
GOOD CONDITION 
PPPPPLLLEEEAAASSSEEEEEEEEEEEEEEE
| bellett.net http://delcohacking.net/forums/ |
|
| GT Extractors WANTED http://delcohacking.net/forums/viewtopic.php?f=6&t=1992 |
Page 1 of 2 |
| Author: | bembokabellettbloke [ Mon Jul 30, 2012 9:15 am ] |
| Post subject: | GT Extractors WANTED |
WANTED GT EXTRACTORS 1967 GOOD CONDITION GOOD CONDITION PPPPPLLLEEEAAASSSEEEEEEEEEEEEEEE |
|
| Author: | PR91 [ Mon Jul 30, 2012 1:04 pm ] |
| Post subject: | Re: GT Extractors WANTED |
 i had to make mine Gaz.... |
|
| Author: | gricey [ Mon Jul 30, 2012 7:57 pm ] |
| Post subject: | Re: GT Extractors WANTED |
Gaz. I can lend you a set to copy if you need . Gricey |
|
| Author: | 1968GT [ Mon Jul 30, 2012 11:26 pm ] |
| Post subject: | Re: GT Extractors WANTED |
Guys, If we can find a maker, I could be interested also, maybe one of our Clubs could could back us????? Surely there would be others in our group that would either need them or would like a spare set?? Dave M. |
|
| Author: | Glenn [ Mon Jul 30, 2012 11:37 pm ] |
| Post subject: | Re: GT Extractors WANTED |
Be nice to get them coated also but would add maybe $200 |
|
| Author: | 1968GT [ Tue Jul 31, 2012 2:41 am ] |
| Post subject: | Re: GT Extractors WANTED |
C'mon Glen, put your TAFE skills to work and you could make them for us in ss????  make a few dollars for yourself!!!
|
|
| Author: | Glenn [ Tue Jul 31, 2012 3:08 am ] |
| Post subject: | Re: GT Extractors WANTED |
Mmm nice idea but would be very expensive i think. I built my Hotrod exhaust system from 316 stainless and a hell of a job. Twin system of course. I used mandrel bends from the steel headers, which are none too cheap either. S/S tends to crack also under very high heat and of course, goes blue too. I think the mild steel and ceramic coated is the way to go. You need to find a exhaust shop with a mandrel bender which is not too common. Or buy a bunch of bends which is what i did when i fitted the Toyota  DOHC engine to my old white GT and weld them up. Tedious to do and even worse to do many of them especially after you watch a shop doing it with a machine.If a set could be used as a dummy and a jig made from it, a shop should be able to make as many as needed and a spare or two. BCCV might look at it maybe ? glenn |
|
| Author: | 1968GT [ Tue Jul 31, 2012 4:38 am ] |
| Post subject: | Re: GT Extractors WANTED |
MILD steel will do!!!
|
|
| Author: | Glenn [ Tue Jul 31, 2012 6:31 am ] |
| Post subject: | Re: GT Extractors WANTED |
1st step would be to get a number of the plates made. |
|
| Author: | gt orphanage [ Tue Jul 31, 2012 7:58 am ] |
| Post subject: | Re: GT Extractors WANTED |
I had a plate made for the race car $80. I have a set of gt one here that are rusty let me know if you want plates made and i will get some done. I can see if he wants to make a set of extractors from the dummy set i have ? Or i have a gt engine here i can fit to the sedan i have the front cut out, a guy in our car club has contacts to cut the plates and he works for a exhaust shop. |
|
| Author: | Glenn [ Tue Jul 31, 2012 8:58 am ] |
| Post subject: | Re: GT Extractors WANTED |
Hi Greg since i am not an offcie bearer of bccv now, it's best for the BCCV Pres. or Parts officer to bring this up with Committee and see which way to head i think. Your offer of a rusty set to get started I am sure would be appreciated. glenn |
|
| Author: | BULLITT [ Tue Jul 31, 2012 9:03 am ] |
| Post subject: | Re: GT Extractors WANTED |
hey glenn gricey has a good set unrusty ...i have seen them ...cheers davo ..... |
|
| Author: | Glenn [ Tue Jul 31, 2012 9:23 am ] |
| Post subject: | Re: GT Extractors WANTED |
even rusty should be ok for a competent maker i think and if a few a being made, a jig could be made off it I don't have any contacts for making these but one of the BCCV Comm. might. In the end it will depend on the demand i guess glenn |
|
| Author: | bembokabellettbloke [ Tue Sep 04, 2012 8:16 am ] |
| Post subject: | Re: GT Extractors WANTED |
thanks for all info and offers guys you are a good bunch..... 
|
|
| Author: | bembokabellettbloke [ Tue Sep 18, 2012 8:48 am ] |
| Post subject: | Re: GT Extractors WANTED |
ok......Ive had a set made...they look GREAT!!!!!! iVE FOUND A GREAT YOUNG BLOKE TO MAKE THEM....HE IS INTERESTED IN MAKING MORE.... WHO IS INTERESTED? photos coming! |
|
| Author: | degruch [ Tue Sep 18, 2012 8:51 am ] |
| Post subject: | Re: GT Extractors WANTED |
Tentatively I'd have to say 'yes' - keen as, but have notoriously unreliable finances presently. Cost? |
|
| Author: | 1968GT [ Tue Sep 18, 2012 9:01 am ] |
| Post subject: | Re: GT Extractors WANTED |
yep, cost please? |
|
| Author: | bembokabellettbloke [ Tue Sep 18, 2012 9:03 am ] |
| Post subject: | Re: GT Extractors WANTED |
you will be able to see them at The Nationals.....hehehheheeheheh ...hopefully on the car! I havent got them yet....they due here anyday! just doing photos now....
|
|
| Author: | bembokabellettbloke [ Tue Sep 18, 2012 9:06 am ] |
| Post subject: | Re: GT Extractors WANTED |
p.s...they are made of stainless steel!
|
|
| Author: | bembokabellettbloke [ Tue Sep 18, 2012 9:34 am ] | |||
| Post subject: | Re: GT Extractors WANTED | |||
here are some photos
|
||||
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|