bellett.net
http://delcohacking.net/forums/

1500 Series engine Extractors
http://delcohacking.net/forums/viewtopic.php?f=6&t=2482		 Page 1 of 2
Author:  oz_toffa [ Sun Sep 08, 2013 9:07 am ]
Post subject:  1500 Series engine Extractors
We have just been quoted $1000 for a set of extractors even with a set to use for makeing up the shape/size?

What THE????

:o :o :o :o :o :o :o :o

could be cheaper if 25 odd were made up

any ideas where they can be done cheaper or if anyone else wants them made up as well?

thanks guys. i know Greg has some contacts up in sunny Qld :mrgreen: :mrgreen: :mrgreen:


OZ
Author:  gt orphanage [ Sun Sep 08, 2013 10:24 am ]
Post subject:  Re: 1500 Series engine Extractors
OZ the last set I had made was $700 fitted they were tuned to the engine specs for the race car. I can bring a plate down but I will need to know as I only have 1 here I would need to have them cut assuming you want all round cast plate? They are around $40 this will save some head ache for them. But I would have to know early this week.
Author:  Glenn [ Mon Sep 09, 2013 12:44 am ]
Post subject:  Re: 1500 Series engine Extractors
given the manifiold plate and a bunch of mandrel bent tubing easily available (usually) in the right size, plus some straight tube, it's not too hard (although a bit time consuming) to make your own, given some skill with an oxy torch.

I prefer fusion weld with a little filler rod using oxy as MIG will restrict the inside of the pipes somewhat
Author:  oz_toffa [ Mon Sep 09, 2013 3:19 am ]
Post subject:  Re: 1500 Series engine Extractors
yes pls GT orpg. just one as i can use it for a template. it is the cast head, all round port style

cheers for the info, guys


OZ
Author:  Stickman [ Mon Sep 09, 2013 3:28 am ]
Post subject:  Re: 1500 Series engine Extractors
I got quoted ball park price of 500-700 clams with me supplying the plates.
I was budgeting for $800 so I wasn't surprised in the least.
Author:  claws [ Mon Sep 09, 2013 7:08 am ]
Post subject:  Re: 1500 Series engine Extractors
Hi Orph,

Do you have any GT extractor plates that you can sell me one or two at the nats. I have a pipe bending friend here in Adelaide who is going to teach me in November. He thinks he can teach any idiot in a few hours but I will prove that I am not just any idiot.
Author:  gt orphanage [ Mon Sep 09, 2013 7:10 am ]
Post subject:  Re: 1500 Series engine Extractors
ANY ONE ELSE WANT SEDAN PLATES :?:
Author:  gt orphanage [ Mon Sep 09, 2013 7:25 am ]
Post subject:  Re: 1500 Series engine Extractors
Claws I do have a gt one here we have never used. I can get some made but they will need a little work to fit. they have the dowel holes in but the studs fit in the corners and need a die grinder to finish them. I am happy to have more of these made.
BUT YOU HAVE BEEN WARNED NOT A DIRECT FIT SOME WORK NEEDED.
Author:  oz_toffa [ Mon Sep 09, 2013 11:43 am ]
Post subject:  Re: 1500 Series engine Extractors
give me 2 pls Greg

i might see how much of an idiot ican be

cheers

OZ
Author:  gt orphanage [ Mon Sep 09, 2013 11:56 am ]
Post subject:  Re: 1500 Series engine Extractors
just tac them oz and get them welded later. Hopefully I will have them done before we leave if not I can post them. I will know more tomorrow.
Author:  pa_man [ Mon Sep 09, 2013 12:37 pm ]
Post subject:  Re: 1500 Series engine Extractors
Yes Please, I would be interested in 1500 sedan plate if its possible :D
Josh
Author:  claws [ Tue Sep 10, 2013 3:24 am ]
Post subject:  Re: 1500 Series engine Extractors
Thanks orph,
Get me 2 made if you can (GT). Will at least give you the money at the nats if their not ready in time
Author:  oz_toffa [ Tue Sep 10, 2013 4:57 am ]
Post subject:  Re: 1500 Series engine Extractors
hey claws

do you mean twin cam engine or standard GT 1600 engine?


OZ
Author:  claws [ Wed Sep 11, 2013 2:09 am ]
Post subject:  Re: 1500 Series engine Extractors
I meant Gt, that's why I put GT in brackets. That's a standard 1600 engine FYI OZTOFF. If it was a twin cam I would have said GTR but I haven't got a GTR. :P
Author:  gt orphanage [ Wed Sep 11, 2013 3:33 am ]
Post subject:  Re: 1500 Series engine Extractors
Hi claws did you buy Daves pr90 :?: Just a question DONT BITE MY HEAD OFF HERE :lol: but has it got a g160 or a g161 because if it's a g160 they may not be the same :?: I DONT KNOW FOR SURE :?:
Author:  claws [ Wed Sep 11, 2013 5:51 am ]
Post subject:  Re: 1500 Series engine Extractors
Hi Orph,
Yep I bought PR90 but GT engine is from the PR91 I bought a couple years ago from the farm on outskirts of Melbourne. Pretty sure it is 161 but will check tonight and message back if not. PR90 didn't come with an engine. FYI OZTOFFA doesn't take my heckling seriously and I don't bite :)
Author:  gt orphanage [ Wed Sep 11, 2013 6:28 am ]
Post subject:  Re: 1500 Series engine Extractors
I figured there was some fun there.
Author:  oz_toffa [ Wed Sep 11, 2013 11:49 am ]
Post subject:  Re: 1500 Series engine Extractors
reason for the question :?: :?: :?: :?:

WHO has a twin cam with extractors that DONT FIT ????

and i know you dont have a GTR. Nore do it, but i have a twin cam in the shed anyway! :lol: :lol: :lol:

so doesnt the twin cam need them as well?


are you confused yet. Well i will keep trying.....


thanks for all your help too, GT Orph. We all do appreciate all the running around, and calls, and all that you do on our behalf


OZ
Author:  gt orphanage [ Wed Sep 11, 2013 10:00 pm ]
Post subject:  Re: 1500 Series engine Extractors
Any sedan gaskets needed :?: I don't have any gt ones left. I am getting 2 florians made soon too.
Author:  pa_man [ Wed Sep 11, 2013 10:51 pm ]
Post subject:  Re: 1500 Series engine Extractors
Definately put me down for a couple :D
Many Thanks Greg
Josh
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/