bellett.net
http://delcohacking.net/forums/

Square port aluminium head G150/160
http://delcohacking.net/forums/viewtopic.php?f=6&t=2796		 Page 1 of 1
Author:  Asroc66 [ Sun Aug 03, 2014 8:22 am ]
Post subject:  Square port aluminium head G150/160
Hi from Tassie
New to forum so of course I jump straight to spare parts page
Don't have a home computer so limited access so apologies
Will try to get to Nationals to make contacts
Well I am in desperate need of a late model aluminium square port head for my club car racer project
Mine has cracked near 1 & 2 spark plugs - new one to me
Any help would be great
Many thanks
James
Lonnie
Tassie
Author:  gt orphanage [ Sun Aug 03, 2014 8:28 am ]
Post subject:  Re: Square port aluminium head G150/160
I have 1 condition unknown, I am in qld.
Author:  Asroc66 [ Sun Aug 03, 2014 8:44 am ]
Post subject:  Re: Square port aluminium head G150/160
Hi
Thanks for the response
Just getting used to this site
What is the etiquette re sale of part
JD
Author:  Asroc66 [ Sun Aug 03, 2014 10:38 pm ]
Post subject:  Re: Square port aluminium head G150/160
Hi all
Looks like a need a Florian head
Round exhaust and square intakes
All help graciously receives
Thanks
James
Author:  Farmer [ Tue Aug 05, 2014 12:05 pm ]
Post subject:  Re: Square port aluminium head G150/160
Hello James,
I'm checking my parts pile. Gotta be one somewhere!
Cheers, Matt.
Author:  yellowperil [ Wed Aug 06, 2014 10:07 am ]
Post subject:  Re: Square port aluminium head G150/160
Hi James

It's great to see another Tassie member of the Forum. That means there are now 3 of us :D :D :D You've just increased our contribution by 50%.

I hope you have some luck with the Al head. What possibility of having it welded?
I wish I could find some for spares, as I have later models and no spare heads. I notice that you have 66 model Belletts, I thought they were cast iron heads. There will be others with more technical knowledge than me on this matter, but will the later model Al head fit the earlier block? One would hope so.

Welcome and good luck with your search.

YP
Author:  Asroc66 [ Wed Aug 06, 2014 11:25 am ]
Post subject:  Re: Square port aluminium head G150/160
Hi YP
I was told to keep an eye out for you as we together are flying the club car banner
Greetings
Well '66 bodies but 1 has a 'warm' g150 bottom end, 1600 gemini pistons, with GT head, carbies and gearbox
Other one being my 'car in need' has a G161 bottom end (sleeved, balance, CP pistons etc) and hopefully Florian head
So yes many parts are interchangeable
Will be great to meet up and talk all things Bellett
Cheers
Jamea
Author:  yellowperil [ Wed Aug 06, 2014 11:38 am ]
Post subject:  Re: Square port aluminium head G150/160
Hi James it seems like we've been doing lots of similar engine building stuff. I've sent you a Private Message with my mobile number.

YP
Author:  Farmer [ Wed Aug 06, 2014 12:13 pm ]
Post subject:  Re: Square port aluminium head G150/160
Found!
This is actually the head that was on Aunty Mary when I got her, but the gunk in the water jackets was causing her to run hot. So I had the spare head recoed, and its all sweet.
Attachment:
20140202_102211.jpg
20140202_102211.jpg [ 284.19 KiB | Viewed 21851 times ]

Its the one at the back. The other one is a GT head for comparison.
Attachment:
20140202_102310.jpg
20140202_102310.jpg [ 261.94 KiB | Viewed 21851 times ]

Again with the GT, small intake ports is Florian.
Attachment:
20140202_102620.jpg
20140202_102620.jpg [ 327.33 KiB | Viewed 21851 times ]

Top one again.
Attachment:
20140202_102726.jpg
20140202_102726.jpg [ 331 KiB | Viewed 21851 times ]

Plug side.

So it will need a reco, but has been hardness tested and OK.
But what to ask? Hmmm....how about.......Make me an offer I can't refuse! ;)

Let me know if you think its OK,
Cheers, Matt.
Author:  Asroc66 [ Wed Aug 06, 2014 12:21 pm ]
Post subject:  Re: Square port aluminium head G150/160
Hi Matt
Nothing a bit of welding can't fix hey.
How about I name my next born child after you?

Matt it Matilda?
:-)
James
Author:  Farmer [ Wed Aug 06, 2014 12:26 pm ]
Post subject:  Re: Square port aluminium head G150/160
yellowperil wrote:
Hi James

It's great to see another Tassie member of the Forum. That means there are now 3 of us :D :D :D You've just increased our contribution by 50%.

I hope you have some luck with the Al head. What possibility of having it welded?
I wish I could find some for spares, as I have later models and no spare heads. I notice that you have 66 model Belletts, I thought they were cast iron heads. There will be others with more technical knowledge than me on this matter, but will the later model Al head fit the earlier block? One would hope so.

Welcome and good luck with your search.

YP

Great to see the Tassie "club" growing! You blokes will have to crooze.
YP, I reckon a lot of Florians donated their mechanics to Belletts years ago. I've even heard it said, "Florians? Pull the Motors & boxes out fer yer Bellett, then chuck em in Port Phillip bay for artificial reefs!"
Sadly, possibly why Florians are so rare now......

Cheers, Matt.
Author:  Farmer [ Wed Aug 06, 2014 12:32 pm ]
Post subject:  Re: Square port aluminium head G150/160
Asroc66 wrote:
Hi Matt
Nothing a bit of welding can't fix hey.
How about I name my next born child after you?

Matt it Matilda?
:-)
James


Hmmm, not bad..........or, better still, name the car after me! "Matilda" - great sporty name! :P
:D Matt.
Author:  Farmer [ Thu Aug 07, 2014 12:58 pm ]
Post subject:  Re: Square port aluminium head G150/160
The head is in the box and the box is in the mail! :D

And that reads a bit macarbre.......data storage police - its a car motor head. :roll:

Hope it all works,
cheers, Matt.
Author:  Asroc66 [ Thu Aug 07, 2014 10:37 pm ]
Post subject:  Re: Square port aluminium head G150/160
Hi Matt
I know in the scheme of things this is not a world changer but it is a big thing to me that you offered your only spare Florian head!
Hats off to you budy - many thanks

Thanks also to all the other members - Bellett members are kings among men

Also thanks to the Isuzu Car Club of Australia

Cheers all
James
Author:  Farmer [ Fri Aug 08, 2014 12:49 pm ]
Post subject:  Re: Square port aluminium head G150/160
Ahhh, gotta look after yer mates! Even if you haven't met them yet! ;)
Cheers, Matt.
Author:  Stickman [ Sat Aug 09, 2014 10:34 am ]
Post subject:  Re: Square port aluminium head G150/160
Farmer wrote:
Ahhh, gotta look after yer mates! Even if you haven't met them yet! ;)
Cheers, Matt.



Haha that is after all the Bellett way :D
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/