bellett.net http://delcohacking.net/forums/ |
|
Bellett GT Body http://delcohacking.net/forums/viewtopic.php?f=6&t=2977 |
Page 1 of 2 |
Author: | Jeff [ Mon Feb 02, 2015 7:45 am ] |
Post subject: | Bellett GT Body |
Hi as part all this work I am doing on my dads sedan. I'm keen on a GT I have spoke to Farmer about his very rusty GT so is there anyone out there that has a damaged one lying around that they would like to part with I am prepared to look at anything. I am after a project as I want to resurrect a GT that will probably never get back on the road due to rust or damage. So it will be heavily modified so I am not trying to offend the traditionalist but custom with the original styling. So if you have something or know of someone please let me know. I know its a complete long shot but if you don't ask you don't know. Thanks |
Author: | BULLITT [ Mon Feb 02, 2015 8:11 am ] |
Post subject: | Re: Bellett GT Body |
hi jeff any sort of gt body exception I guess on farmers one is going to cost bucks ....from shells at $2000 to reasonable gt would be around $10.000 I could be wrong my 90 is worth $10.000 as is all day long to me ..(I feel) there was gunna who looked forever till he got91 goldie ,,lewis bought a gem 91 from Melbourne just had $8000 spent on the motor ....the very rusty x Ballina x new guinea .. pr91gt yellow one went for $2500 that's long gone ..maybe im out of touch see what other forum members say ...... |
Author: | Glenn [ Mon Feb 02, 2015 8:33 am ] |
Post subject: | Re: Bellett GT Body |
Where are you located, Jeff? |
Author: | mrflibbles [ Mon Feb 02, 2015 8:40 am ] |
Post subject: | Re: Bellett GT Body |
Adelaide. |
Author: | Retroasted [ Mon Feb 02, 2015 9:33 am ] |
Post subject: | Re: Bellett GT Body |
That one at Farmer's could be saved with a complete sedan floor and lower rear 1/4s? The rest fabbed? |
Author: | oz_toffa [ Mon Feb 02, 2015 10:43 am ] |
Post subject: | Re: Bellett GT Body |
and there are a few wrecked sedans in north of Adelaide with floors still.. claws and OZ have the goods! yeah |
Author: | Jeff [ Mon Feb 02, 2015 12:26 pm ] |
Post subject: | Re: Bellett GT Body |
Yeah Chris that Blue wreck you've got is a perfect car to cut up for those sections. that are hard to replicate. |
Author: | Jeff [ Sun Feb 08, 2015 1:49 pm ] |
Post subject: | Re: Bellett GT Body |
Hi Guys, I have been reviewing the photos of Matt's GT Shell (Farmer) and it is quite bad and I need a roof plain and simple or even a wreck that someone is willing to part with. I just can't give up even though I'm probably crazy but there has to be someone out there in the Bellett community who is prepared to part with these parts. I don't want an original car as I am dead set keen on this custom project for something different. Please feel free to discuss what you have and we can go from there. Thanks Jeff |
Author: | Jeff [ Sun Feb 15, 2015 5:09 am ] |
Post subject: | Re: Bellett GT Body |
Some of you may have noticed I have been looking for a GT shell or parts car to fix Matt's car, I've tried Japan but no luck as yet. I have been asking on all the sites on Facebook to see if anyone outside the forum may know of one so please let me know if you here of anything. I will look at what ever is on offer. I know I might be dreaming but there has to be one out there. I am keen on building a modified car so not keen on ruining an original car if possible but like I said will look at anything even if some one has cut one up and stashed it in the shed for parts. If I could just get a better roof, then Matt's car is repairable (Just). Any assistance would be greatly appreciated. Thanks |
Author: | Farmer [ Wed Feb 18, 2015 11:17 am ] |
Post subject: | Re: Bellett GT Body |
Some are wondering how bad the rusty yella is. Like this: Attachment: 20150131_183522.jpg [ 248.57 KiB | Viewed 30168 times ] Attachment: 20150208_091343.jpg [ 260.29 KiB | Viewed 30168 times ] Attachment: 20150131_183042.jpg [ 286.59 KiB | Viewed 30168 times ] In short, there is rust in some important structural areas. Its not a restoration prospect, because there would have to be a better one somewhere. Looking back over for sale posts, there have been a few for only a few grand. But it may work for what Jeff is planning. I see a lot of money being needed though. Cheers, Matt. |
Author: | PR95 [ Wed Feb 18, 2015 11:38 am ] |
Post subject: | Re: Bellett GT Body |
Just give it a cut and polish Matt, should make it like new again |
Author: | rod [ Wed Feb 18, 2015 8:44 pm ] |
Post subject: | Re: Bellett GT Body |
very sad .....another one that wont get back ....rip |
Author: | BULLITT [ Wed Feb 18, 2015 9:23 pm ] |
Post subject: | Re: Bellett GT Body |
matt how much for the roof aeriel ??? is it still avail and also has it a pedal accelerator ?? cheers davo |
Author: | Glenn [ Thu Feb 19, 2015 2:19 am ] |
Post subject: | Re: Bellett GT Body |
PR95 wrote: Just give it a cut and polish Matt, should make it like new again Nice patina........ |
Author: | Glenn [ Thu Feb 19, 2015 2:20 am ] |
Post subject: | Re: Bellett GT Body |
BULLITT wrote: matt how much for the roof aeriel ??? is it still avail and also has it a pedal accelerator ?? cheers davo Dave, those antennas were available from accessory shops... may have to order in perhaps. Places like Autobarn. HARALDA R-2EB-H 'ROOF ANTENNA' |
Author: | degruch [ Thu Feb 19, 2015 4:33 am ] |
Post subject: | Re: Bellett GT Body |
How are the towers looking? |
Author: | 67GT [ Thu Feb 19, 2015 4:34 am ] |
Post subject: | Re: Bellett GT Body |
No worse than Patches eh GT Orph. |
Author: | BULLITT [ Thu Feb 19, 2015 5:02 am ] |
Post subject: | Re: Bellett GT Body |
I reckon our friend in spain ??? would love it ... |
Author: | Retroasted [ Thu Feb 19, 2015 7:26 am ] |
Post subject: | Re: Bellett GT Body |
It appears worse than I remember |
Author: | CQGT [ Thu Feb 19, 2015 1:14 pm ] |
Post subject: | Re: Bellett GT Body |
Davo. When brother Joe and I removed the steering wheel from off of this car we were picking up parts of the wheel under neath it. As the wheel was exposed to all the weather elements it dried out and started to splinter and drop down through the floor. To answer your regarding accelerator pedal. There isn't 1. No floor to mount it 2. And if there was...... it would probably end up on the ground underneath. Try ebay if you don't get any luck with Autobarn etc. The aerial. Matt has himself got first dibbs on it. He has another GT and when all of the projects are finished and the kids have left home he may find time to do it as a project. That's if he doesn't buy more. With the teardrop gone to SA. leaves a bit of space in the yard. There was a ebay bloke that specificaly sold aerials. Don't know if he still does. Sorry Jeff. Hijacked your Post. Dave. |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |