| bellett.net http://delcohacking.net/forums/ |
|
| windscreen rubbers door rubbers ,boot rubbers ,channell http://delcohacking.net/forums/viewtopic.php?f=7&t=378 |
Page 1 of 1 |
| Author: | BELLQLD [ Tue Apr 21, 2009 5:52 am ] |
| Post subject: | windscreen rubbers door rubbers ,boot rubbers ,channell |
hi i have just made a contact today who can supply screen rubbers ,sedan and gt $99 each however he needs at least 30 sets to be feasible who out there needs a brand new screen rubber .I am in for 2 this guy will put these world wide if he gets enough .door rubbers set $99and boot rubbers approx $45-$50 .he is having a big day in brisbane as he is going to be importing full gt falcon parts (panels ) monaro etc being made after mart he said he could do bellett stuff if there was enough inquiry im talking doors ,boots , gaurds ,front valance.So how many people need window rubbers ,door rubbers etc pleses contact me this guy allredy exports around the world regards dave 0428 146438 sounds like a storey but its true ask BELLETT ORPHANGE AS WELL |
|
| Author: | 2ldohc [ Tue Apr 21, 2009 12:06 pm ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
I'm up for a front screen seal and a rear one too plus the boot would be great. Someone will need to correct me if I'm wrong but I think that there are two different windscreen seals out there for pre '68 and post '68... Mines the post '68 style with the higher roof line. Cheers, Ross. |
|
| Author: | gt orphanage [ Tue Apr 21, 2009 1:45 pm ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
I hope to see this guy tomorrow with a few parts. He claims that if we can provide orders of 30-50 items he can produce them? I thought maybe we look at yellow lenses for the 66/67 era and gt strip yellow and red as i think they would be in high demand. This will see if we as a group can arrange a big enough order and give him the chance to produce the goods.I believe if we contact him as a group with bulk orders would be better than everybody making contact with one off orders. If anyone is interested or has suggestions please post. |
|
| Author: | Davem [ Tue Apr 21, 2009 9:57 pm ] | ||
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell | ||
GTOrphanage, let me know how you go, I am looking for new lenses for the late model GT, I.E. 19681/2 model, maybe he is prepared to supply those also?? By the way say gooday to your Dad, Geoff, we go back a Looonng way!!
|
|||
| Author: | gt orphanage [ Tue Apr 21, 2009 11:15 pm ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
Hi Dave Thats what i ment in saying later strip lights for gt.This is the same as what gttoo has sent a thread on this morning as well. The reason for playing with lenses as the 1st item is i thought i could get large qantities with little effort more so than w/screen rubbers. Thanks for the support on this one i will follow it through see how we go. cheers Greg |
|
| Author: | Farmer [ Tue Apr 28, 2009 12:24 pm ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
G'day Dave & Greg. Thanks for doing the chasing. Boot seal is a good one 'cause as they age they hold water & cause rust, (though I dont know if an approx. section is already avail from clark rubber). 2 for me, please. Other suggestions are - Early (2 hole) front blinker lens (wasp, '64 - '66 sed.);Early round amber rear blinker lens - in fact I'd buy some of any lens. I'll take 1 each of early sedan & G.T. front screen rubbers. Thanks & good luck, Matt. |
|
| Author: | gt orphanage [ Tue Apr 28, 2009 1:11 pm ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
I could help you out with 2 second hand clear lights above the front bumper.I have pm davem about the rear tail light lenses i need a order for 50 units can be 25 red 25 yellow as this is only a small order they can be reproduced in australia the problem is the price is going to be around $110 dollars each if we can get a bigger order they will get cheaper. i have sent a pr 91 windscreen overseas and prepaid for the tooling to be produced as we require 3 another forum member is interested in one.They will have the first one available for fitment in around 60 days.If this one is ok they should be available 30 days after. The problem is it i expensive to produce the tooling after that they can be reproduced resonably cheap{the windscreens are around $500 each}if anyone wants one please contact me. again if the order is big enough they will get cheaper. |
|
| Author: | toomanybelletts [ Wed Apr 29, 2009 9:53 am ] |
| Post subject: | Re: windscreen rubbers door rubbers ,boot rubbers ,channell |
PUT ME DOWN FOR SEVERAL SETS !!! ALL MY CARS ARE DUE FOR RUBBER REPLACEMENT . LET ME KNOW WHEN YOU HAVE A FINAL COSTING . CRAIG |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|