View unanswered posts | View active topics It is currently Sat Nov 02, 2024 10:19 am



Reply to topic  [ 15 posts ] 
Early Tear Drop Bellett Sedan 
Author Message

Joined: Wed Oct 03, 2012 7:18 am
Posts: 88
Car(s): LS1 Powered EJ Special
Reply with quote
I have an opportunity to purchase a teardrop early sedan and it is 99% complete, it is not running at this stage and is defected (SA Reg.) for no accelerator pedal it has not been on the road for a few years. it is pretty rust free, the only thing it has a set of mags on it.

Its darkish blue with blue interior.

I am asking $700-$800 neg. for it so let me know if you are interested. It would make a good parts car as the taillight lenses aren't broken the badges are on it the horn button is still fitted. Not looked at the engine as yet. the car is not perfect but if someone is chasing parts for their own resto its definitely worth it. If it wasn't for the defect it would clean up well enough to drive the paint work is ok but like I said not sure about mechanicals was running fine before defect.

I only had a quick look at it today as it is not the same model I have which is a 67 so not really needed as you know I am chasing a GT.

Thanks


Wed Feb 11, 2015 12:08 pm
Profile

Joined: Mon Jan 05, 2009 10:39 am
Posts: 1136
Location: Adelaide Hills
Car(s): GU Patrol, AU ute, 1969 florian deluxe, 1976 Luv & 1980 KB 4x4 isuzu
Reply with quote
It would probably be well worth grabbing for someone, Defects can be fixed, or it could be the base of a restore rebuild. Did you manage to get any pictures of it?

_________________
I am "that" Florian guy.
never buy a car you cant push.


Wed Feb 11, 2015 8:41 pm
Profile

Joined: Wed Oct 03, 2012 7:18 am
Posts: 88
Car(s): LS1 Powered EJ Special
Reply with quote
I only have one but it doesn't show much. There is a couple minor dents on the front guard and the rear door, the other side looked better.


Attachments:
20150209_193703.jpg
20150209_193703.jpg [ 134.18 KiB | Viewed 21836 times ]
Wed Feb 11, 2015 11:20 pm
Profile
User avatar

Joined: Sat Oct 10, 2009 7:52 am
Posts: 685
Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Reply with quote
I have seen that car, under the bonnet (bonnet cable broken) no fuel pump, and had a foam air cleaner which had
disintegrated so would say the carby would need a good clean out minimum.
Interior was pretty ratty and the roof lining had been ripped from one side to the other,
Ignition wiring had been pulled out where the key barrel is.
The bottom of one brake lend had broken.
It was pretty rust free though a few dings round the place
I made a $400 offer a couple of years ago but they wanted much more.
As I bought the Wasp and the Luv since am full up
Josh


Thu Feb 12, 2015 12:53 am
Profile

Joined: Wed Oct 03, 2012 7:18 am
Posts: 88
Car(s): LS1 Powered EJ Special
Reply with quote
I haven't looked into it that much but I think they are moving and it may end up at the scrappers so made an offer and they accepted as I thought another one saved and there are members out there still looking for parts for them so that is why I am offering it to cover costs and a little extra for my time. Plus I'm trying to purchase a G200W engine for the GT project as my original plan of the Toyota V8 is just too wide to fit. I could drive the car straight but wouldn't be able to turn so I am looking at the G200w.

Thanks for the info though, yeah its defected so probably only good for a parts car.


Thu Feb 12, 2015 2:13 am
Profile
User avatar

Joined: Fri Apr 10, 2009 11:29 pm
Posts: 1524
Location: Kallangur, Brisbane QLD
Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
Reply with quote
If it were closer to Brisbane I'd buy it.... just a bit too far away sadly :(

_________________
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au


Thu Feb 12, 2015 6:45 am
Profile YIM WWW
User avatar

Joined: Sat Oct 10, 2009 7:52 am
Posts: 685
Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Reply with quote
If I didnt have the Wasp i would consider it too but there is only so much room/time! :D


Thu Feb 12, 2015 6:49 am
Profile

Joined: Wed Oct 03, 2012 7:18 am
Posts: 88
Car(s): LS1 Powered EJ Special
Reply with quote
Hi Fellow forum members,

I picked up the Bellett today and am quite impressed with the overall condition of the car that has been outside for quite sometime and by the look of the rego papers It have has not been on the road since 2002.

I have taken some photos of its over all conditions. There has been a mishap in the front and the bonnet cable is broken so no pictures of the engine bay. There is little rust and it is pretty straight apart from the front damage, bumper is ok but both the guards are damaged but no rust though, the front door on the passenger side is rusted as you will see in the photos and there is a spot in the rear sill on the drivers side as per any other Bellett but the rest is ok has few a dents here and there. the stainless is great condition only one with a small mark. It has its horn button and even the original fuel cap and grill badge intact, no bonnet badge though.

It looks like the round tail light lenses have been replaced at some point but the larger red ones, one is damaged. it is without looking under the bonnet about 90% there. Let me know what you think. It is a pitting its defected as you could clean it up and get it running and use it as it is with the patina of the paint.

I am still waiting on the keys for the car so can't show any photos of the boot but I can tell you that I cannot see much if any rust underneath the car, even both the bottom of the B pillars have no rust. It is currently being stored at my Dad's house so if you have any questions let me know and I can organise for anyone who want to view it.

I could go on about it even the floor mats in the car aren't even damaged the hood lining is ripped, but it is well worth the look.

Thanks for looking
Jeff


Attachments:
DSCN0566.jpg
DSCN0566.jpg [ 151.58 KiB | Viewed 21745 times ]
DSCN0565.jpg
DSCN0565.jpg [ 76.39 KiB | Viewed 21745 times ]
DSCN0563.jpg
DSCN0563.jpg [ 137.93 KiB | Viewed 21745 times ]
DSCN0562.jpg
DSCN0562.jpg [ 141.59 KiB | Viewed 21745 times ]
DSCN0564.jpg
DSCN0564.jpg [ 151.57 KiB | Viewed 21745 times ]
DSCN0561.jpg
DSCN0561.jpg [ 143.58 KiB | Viewed 21745 times ]
DSCN0560.jpg
DSCN0560.jpg [ 129.79 KiB | Viewed 21745 times ]
Sat Feb 14, 2015 10:56 am
Profile

Joined: Mon Jan 10, 2011 1:03 pm
Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
Reply with quote
great little car with an ironical numberplate ''your 66 ''' someone help it back on the road


Sat Feb 14, 2015 11:19 pm
Profile

Joined: Wed Oct 03, 2012 7:18 am
Posts: 88
Car(s): LS1 Powered EJ Special
Reply with quote
So is anyone interested in the tear drop?


Wed Feb 18, 2015 9:34 am
Profile

Joined: Thu Feb 05, 2009 11:36 am
Posts: 579
Car(s): 68gt coupe , 98 toyota prado
Reply with quote
how much ....you looking for $$$


Wed Feb 18, 2015 8:52 pm
Profile

Joined: Fri Mar 02, 2012 12:08 pm
Posts: 76
Location: Penrith ,NSW
Car(s): 2x 1964/5 ' Teardrops' & 1967 Bellett &too many Valiants
Reply with quote
I would try Ebay and list it there .Teardrops are rare these days, and $800 is a bargain.
I just sold a Teardrop on Ebay to someone who knew nothing about them but liked the look.
He wasn't a forum member as far as I know.
Cheers
Rod.


Fri Feb 20, 2015 10:04 am
Profile
User avatar

Joined: Wed Mar 04, 2015 1:03 pm
Posts: 3
Location: Adelaide
Car(s): 1964 Bellett Sedan (under resto); VP S pack V8 Ute
Reply with quote
That 64 looks like it's sporting 15 inch rims from an 80's Nissan 300ZX (see pic)

Both cars are 4x114 stud pattern but I'm surprised the 15's would fit in the Bellett arches.

Those wheels are worth at lest $50 on their own. I've got a set if anyone wants, so does 2ldohc :-)

Cheers, g0speed

Attachment:
File comment: Old skool kool
Z31stock.jpg
Z31stock.jpg [ 71.06 KiB | Viewed 21489 times ]


Wed Mar 04, 2015 2:09 pm
Profile

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
Looks more like early Magna wheels. Take note of the different centre cap arrangement. TN and TP Magna are also 4/114.3 stud pattern.


Wed Mar 04, 2015 8:55 pm
Profile
User avatar

Joined: Sat Oct 10, 2009 7:52 am
Posts: 685
Car(s): 67 Bellett Auto Sedan, 65 Wasp, 73 Chev Luv, 1/2 A Chev Luv, VX Commodore
Reply with quote
Yep Magna Rims on the 66 :geek:

Josh


Attachments:
1989-1991_Mitsubishi_Magna_TP_SE_station_wagon_2010-07-25_02.jpg
1989-1991_Mitsubishi_Magna_TP_SE_station_wagon_2010-07-25_02.jpg [ 89.78 KiB | Viewed 21457 times ]
Wed Mar 04, 2015 11:33 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 15 posts ] 

Who is online

Users browsing this forum: Bing [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.