Datsun 240z with L20ET
Re: Datsun 240z with L20ET
its sounding very promising, good job!
ive got another quick question, do commodore high-impedance injectors fit straight into the factory manifold?
ive got another quick question, do commodore high-impedance injectors fit straight into the factory manifold?
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
No they dont. Almost nothing does 95% of what does is low impedance. RB20, CA18, or 240sx injectors are the high impedance top feed nissan ones that do fit. We have found some other possibilities (Bosch 0280 150 788) but havnt tried them yet, They are in some 90s lancer/magna/pajero/tritons.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
Firing order / coil to cylinder wiring for coilpacks:
- Attachments
-
- L series coilpack.jpg (21.43 KiB) Viewed 5602 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Datsun 240z with L20ET
is the firing order for the motor 153624 ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
Yep, thats it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Datsun 240z with L20ET
ive just done some research on the injectors, they are barbed top and need a new fuel rail to use with o-ring top injectors. on hybridz they seem to use an injector from a mercedes a fair bit, because its low impedance, higher flow and barbed inlet. but im pretty interested in using newer ev6 style o-ring injectors. apparently they fit into the manifold and there is a bloke in the usa making fuel rails for the standard efi manifold, but they suit 11mm injectors. im guessing this is the inlet and the outlet size, so using commodore 14mm injectors is a no-go. still, looks like there is some good aftermarket options on sites like injectorsonline.com.au.
some reading: http://forums.hybridz.org/index.php/top ... radesswap/
some reading: http://forums.hybridz.org/index.php/top ... radesswap/
Re: Datsun 240z with L20ET
Holden202 wrote:is the firing order for the motor 153624 ?
Just like a Holden straight 6 hey....antus wrote:Yep, thats it.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Datsun 240z with L20ET
yeah and falcon 6's too .... wouldn't be suprised if most straight 6's are the same!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
2:51 am, track day in the morning, and it runs!! Got thrown by a power issue to the ignition for a while but got it going. Will update at the end of the track day.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Datsun 240z with L20ET
LOL talk about cutting it fine
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread