Been a hecktic day didn't get a chance to have a look at it again. I tried a few things last night - I think it may be the gscan2 we have being the issue. I am waiting for a usb elm327 device to come. Hopefully next week it will be here.
The ecu can be read no problem with the scan tool. Basically car starts about 75% of the time we have a new reconditioned unit from injectronics. We were going to send their unit down to them however the customer needs his car. So he was happy to have his car start 3/4 of the time but still to have access to it.
I tried the kia/hyundai option it was the same error of 8 with the demo tool. I downloaded the brute force version by The1 modified the error output of his code to see what error came back when just trying to connect. Using the "gscan2 Other" option I would get error code 9 - timeout. Using the "kia/hyundai" option it would wait longer then a few dll exception errors and a bit of random gabled text.
I found some other aftermarket diag/performance software that would use the J2534 protocol all of them failed with the same code 9 timeout response. I tried few different vehicles just to see if anything would connect. It did not so I am leaning on towards something wrong with the gscan2. So I will twait till the other device comes and see how it goes with that.
Thanks for your help.
VZ E55/E40/E38 ECU LINKER
Re: VZ E55/E40 ECU LINKER
vxdiag and mdi def works with my tool and should be no different with this.
Also check you dont have MDI and VXDiag both installed at same time, did funny stuff for me.
Also check you dont have MDI and VXDiag both installed at same time, did funny stuff for me.
Re: VZ E55/E40 ECU LINKER
Hiya,The1 wrote:vxdiag and mdi def works with my tool and should be no different with this.
Also check you dont have MDI and VXDiag both installed at same time, did funny stuff for me.
explain?
or do you mean running at same time?
Re: VZ E55/E40 ECU LINKER
Vxdiag replaces the dll for the mdi so it uses vxdiag when you select mdi
Just reinstall mdi driver after you install vxdiag
Just reinstall mdi driver after you install vxdiag
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55/E40 ECU LINKER
it was one or the other when i was using it, both would never work.mattyjf01 wrote:Vxdiag replaces the dll for the mdi so it uses vxdiag when you select mdi
Just reinstall mdi driver after you install vxdiag
Re: VZ E55/E40 ECU LINKER
V0.05
Added Immobilizer builder from Pim Eeprom
Added Hex view and edit of Security code
Added Immobilizer builder from Pim Eeprom
Added Hex view and edit of Security code
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55/E40/E38 ECU LINKER
V0.06
- Added E38 eeprom read and write
- Added E40 eeprom read
- Added E38 eeprom read and write
- Added E40 eeprom read
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VZ E55/E40/E38 ECU LINKER
V0.08
-Added VY VZ Radio code calculator
-Added VY VZ Odometer bin file editor
-Added VY VZ Radio code calculator
-Added VY VZ Odometer bin file editor
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203