Vt v8 enhanced logging issue
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Vt v8 enhanced logging issue
Gday all so I have an issue with a car currently that with the ingnition on engine off I can connect to the car (has nvram installed with vt v8 enhanced code) I can make any change I like but as soon as I start the car up the program goes haywire. I’ve tried disconnecting the bcm and no difference, sometimes tunerpro will crash. Any input would be great. Cheers
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vt v8 enhanced logging issue
if it works with the ignition off you must have the settings right, so I'm thinking electrical noise when something powers on with the ignition. Aftermarket stereo or android or something like that on the ALDL line? Otherwise some other source of electrical noise in the car, possibly ignition related.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Vt v8 enhanced logging issue
Given that it only goes haywire with the engine running that may suggest that’s it’s engine related rather than interior accessories related. Oddly the car will still start with the bcm removed. Vats still active. I may have to investigate why that would be the case, may or may not be related. I’ll check engine earths. Cheers
Re: Vt v8 enhanced logging issue
Is the engine fitted with resister spark plugs?
According to chemistry, alcohol is a solution...
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Vt v8 enhanced logging issue
They are resistor type so not that Gareth.
Re: Vt v8 enhanced logging issue
I generally connect cable, open TP, start the car then hit connect. Always had issues when I connect before starting car. Are you just trying to log ?
Re: Vt v8 enhanced logging issue
When you disconnected the BCM, was that with BCM Be Gone switch mod?