Yeah, I have tried multiple times over the years. He never replies assuming because he doesn't want to sell it to me. I would dare say I would end up with 98% of all his delco business as everyone that comes to me all say he is impossible to get hold of and often postpones multiple bookings on the day.
My business inbox gets flooded for tunes due to him never repsonding after I sent them his way for a Kalmaker tune.
Purchase Kalmaker
- Rhysk94
- Posts: 63
- Joined: Sun Mar 15, 2020 7:25 pm
- cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo - Location: Perth
- Contact:
Re: Purchase Kalmaker
[youtube]https://www.youtube.com/channel/UC9mxPS ... c5acnkETHA[/youtube]
- Knackersjewels
- Posts: 44
- Joined: Thu May 05, 2022 8:24 pm
- cars: 2x VZ alloytec
VY SS L98 ute - Location: Maffra, Vic
- Contact:
Re: Purchase Kalmaker
I've had good luck with him in the past, I'll see if I can get onto him sometime during the week
-
- Posts: 187
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: Purchase Kalmaker
I believe there was a WB5 for the flash PCM in 2 Bar MAPantus wrote: ↑Wed Apr 03, 2024 10:51 pm Because in workshop (not SP3 which was for the early PCMs only) they have a commercial MAP tune for the later model PCMs, where as we only have extended (enhanced) MAF. Enhanced is capable, but some people still want to tune MAP. If you have tunerpro definitions for editing and logging the Kalmaker MAP bins I am sure people who owned a copy would use them. To the best of my knowledge there are only a couple of specific versions where aftermarket people have put in the work to make them. They are on this site. Here is a matrix I archived from the kalmaker site when it existed about program versions and what they are for. W means Workshop, the number in the tens is computer type, the number in the units is the feature. They used to be sold individually, or bundled in a package, then copy protected and licensed for individual PCMs.
- Rhysk94
- Posts: 63
- Joined: Sun Mar 15, 2020 7:25 pm
- cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo - Location: Perth
- Contact:
Re: Purchase Kalmaker
It has 3bar map on flash based pcm's, used to have that for a fair few years from Al back in the day!0081 wrote: ↑Tue Apr 30, 2024 4:42 pmI believe there was a WB5 for the flash PCM in 2 Bar MAPantus wrote: ↑Wed Apr 03, 2024 10:51 pm Because in workshop (not SP3 which was for the early PCMs only) they have a commercial MAP tune for the later model PCMs, where as we only have extended (enhanced) MAF. Enhanced is capable, but some people still want to tune MAP. If you have tunerpro definitions for editing and logging the Kalmaker MAP bins I am sure people who owned a copy would use them. To the best of my knowledge there are only a couple of specific versions where aftermarket people have put in the work to make them. They are on this site. Here is a matrix I archived from the kalmaker site when it existed about program versions and what they are for. W means Workshop, the number in the tens is computer type, the number in the units is the feature. They used to be sold individually, or bundled in a package, then copy protected and licensed for individual PCMs.
[youtube]https://www.youtube.com/channel/UC9mxPS ... c5acnkETHA[/youtube]