 |
Urethane Rubber components ie timimg chain Damper
| Author |
Message |
|
65bellett
Joined: Sun Oct 26, 2008 9:31 am
Posts: 234
Location: Melbourne, Australia
Car(s): 65 and 66 sedan
|
Cheers for the Heads Up Gt. I just had a look at Phils E-bay store and he doesn't seem to have them listed, I will send him a message tomorrow. Do you know what series Luv they were from. Sorry to Hi Jack the thread  _________________
|
| Thu Dec 15, 2011 3:33 pm |
|
|
|
Antti Pellonpää
Joined: Fri Sep 26, 2008 6:33 am
Posts: 51
Location: Finland, Alavus
Car(s): Impulse -85, racing Bellett -67 1,5-liter 5-speed, GEO Storm -93 1,8 16V DOHC
|
Original timing chain tensioner rubbers are still available from Isuzu Motors. We have some stock here in Finland. But they cost 35 euros each.
Happy and Great New Isuzuyear 2012!
|
| Wed Dec 28, 2011 8:58 pm |
|
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am
Posts: 2544
|
hey OZ....
anymore developments on the chain rubbers?
reckon i'm in need of one for sure....
|
| Mon Oct 29, 2012 1:29 pm |
|
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am
Posts: 2823
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
Antti Pellonpää wrote: Original timing chain tensioner rubbers are still available from Isuzu Motors. We have some stock here in Finland. But they cost 35 euros each.
Happy and Great New Isuzuyear 2012! glenn
_________________
'72 PR60 Sport
|
| Mon Oct 29, 2012 9:32 pm |
|
|
|
oz_toffa
Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
|
i have some that cured really well but not tested as yet.
really prefer to trial one in my own motor first, have a 1500 sedan motor coming together at moment but daughter wedding has slowed up the engine build.
if your real keen, you can trial one, but dont want to see your engine have issues, not that i imagine it wont be as good or better then the original ones.
OZ
_________________
So many toys and so little time to play!!
|
| Mon Oct 29, 2012 9:36 pm |
|
|
|
Dick
Joined: Sun Mar 01, 2009 7:18 pm
Posts: 95
Location: Netherlands / Holland
Car(s): Isuzu Bellett 1600 Sport SOHC, Honda City 2006, Honda CRV 2010, Vespa P150
|
To answer the question of Glenn;
the part nr of the rubber chain tensioner is 11319-051
groetjes Dick
|
| Wed Oct 31, 2012 9:00 pm |
|
|
|
oz_toffa
Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
|
_________________
So many toys and so little time to play!!
|
| Thu Nov 01, 2012 7:53 am |
|
|
|
oz_toffa
Joined: Fri Sep 26, 2008 6:16 am
Posts: 1157
Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
|
Has anyone used Hillman tensioner before? i think i did fit one many years ago. they are about 116mm long and the original Bellett is 140mm. shape is exactly the same. can also get the metal spring to fit the Hillman size too. only issue i can see is the tensioner may not do the job for as long as it wont give the chain quite the same area of load which would be ok when new, but as the chain stretches and wears, would get noisy sooner. any and all thoughts will be considered as constructive :0  OZ
_________________
So many toys and so little time to play!!
|
| Fri Nov 02, 2012 10:17 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
