VY PCM - 16269238
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
VY PCM - 16269238
Here is a picture of a 6 cyl VY PCM (if anyone wants a 15MP high res shot PM me). It uses a AMD 29F010B flash chip (U11) in place of the memcal.
Re: VY PCM - 16269238
Cool!
Got a realtime hack for it yet?
Got a realtime hack for it yet?
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VY PCM - 16269238
knowing VL400 it wont be long
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VY PCM - 16269238
see it still has a spot for a memcal header much like a vs pcm but less componants same 3 plug setup too wonder if a vs style would be swappable to the harness for conversions
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VY PCM - 16269238
Looks interesting.
I only see 6 injector drivers on the board........
I only see 6 injector drivers on the board........
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VY PCM - 16269238
Will be awhile off yet for a realtime! Plus its a bit of a nightmare to work with. The flash chip probably wont programmable on board so yeah would have to add a board to the row of pins above it. All the pins seem to be there from a quick buzz out.
The VS connectors have different key ways so not direct plugin unless you do some filing, much like the VN to VR plugs. Pinouts, well you would have to check all that out.
Yeah only 6 drivers, but has room for two more - pretty hard to buy them, would have to remove them from another PCM probably. Hopefully you have a mate that wants to run one on a 4 cyl
The VS connectors have different key ways so not direct plugin unless you do some filing, much like the VN to VR plugs. Pinouts, well you would have to check all that out.
Yeah only 6 drivers, but has room for two more - pretty hard to buy them, would have to remove them from another PCM probably. Hopefully you have a mate that wants to run one on a 4 cyl
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VY PCM - 16269238
look the same as VS injector drivers i have 6 here if anyone ever needs any i think the flash chip should be flashable on board if things like efilive/vcm suite etc can flash it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VY PCM - 16269238
I WANT ONE!
I reckon this should be where we focus our efforts. Is it still using a 6811 based code or is it 16 bit?
It will be a far more powerful ECU.
I reckon this should be where we focus our efforts. Is it still using a 6811 based code or is it 16 bit?
It will be a far more powerful ECU.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VY PCM - 16269238
whats wrong with an 808 with RT conversion
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VY PCM - 16269238
yeah you guys can keep your horrible MAF based sequential ecu LOL joking but when you come up with a MAP tune to suit ill be keen
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem