Generic donor TPS?
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Generic donor TPS?
Anybody know of a good resistance type TPS which fits on the end of a D shaped shaft for conversion of a non GM TB which has a switch type TPS as stock?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Generic donor TPS?
haha, that's a mouthfull, got a pic?
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generic donor TPS?
Rewording: I need a TPS to fit on the end of this. I can adapt up the mounting points, but need something to fit the D shape. Any ideas?
- Attachments
-
- tps.jpg (143.02 KiB) Viewed 9641 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Generic donor TPS?
Something like this one fitted to the RHS of the solex TB? I replaced the original switch with this before I changed plans and used a GM TB.
I'll get a better pic and dimensions/part number next time I'm in the shed.
I'll get a better pic and dimensions/part number next time I'm in the shed.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generic donor TPS?
Yeah, that looks good, cheers!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Generic donor TPS?
Wabush/Spectrol 971-0002 - see http://www.wabashtech.com/SPD/971rps.php.
8mm shaft, 4mm slotted bolt holes approx 32mm apart, and reversible for either cw/ccw rotation.
8mm shaft, 4mm slotted bolt holes approx 32mm apart, and reversible for either cw/ccw rotation.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Generic donor TPS?
i think there is a falcon one like that which works too, not sure on much detail for it though.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Generic donor TPS?
EB falcon I think - but they cost a bit more than these from memory.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generic donor TPS?
It turns out I have one of the spectrol variants of the sensor festy posted on my g200w, but looking around the net they seem to be an expensive and discontinued part, so prefer to find something from the junkyard.
So we matched up this nissan/JECS item (the orginal isuzu one was also stamped JECS), and ripped the old one to bits, hit it with the angle grinder and made up an adapter plate. The adapter plate spaced it out just right so mechanically its the goods. The main connector is no connection for mid swing with a switch for idle and switch for WOT, but the extra connector coming out the side - for the auto trans I believe - has analog on it. I hooked it up:
And it starts at 0% and swings with the butterfly opening but tops out at 45%. Not sure if Im going to need to add a balast resistor somewhere, hook it up differently, or if something needs to be configured in $12P?
So we matched up this nissan/JECS item (the orginal isuzu one was also stamped JECS), and ripped the old one to bits, hit it with the angle grinder and made up an adapter plate. The adapter plate spaced it out just right so mechanically its the goods. The main connector is no connection for mid swing with a switch for idle and switch for WOT, but the extra connector coming out the side - for the auto trans I believe - has analog on it. I hooked it up:
Code: Select all
Nissan Delco
------ -----
Green/Black --> Grey
Green/Red --> Black
Green --> Blue
- Attachments
-
- isuzu nissan JECS tps_s.jpg (148.19 KiB) Viewed 9579 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Generic donor TPS?
Might need to have a play with "TPS - TPS Full travel - Worst case minimum voltage". Go WOT at check the TPS voltage in TP, just make the worst case voltage a tad lower than that.