FS: USB Vehicle Data Interface
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
FS: USB Vehicle Data Interface
USB ALDL Interface
Ordering Information: Ordering is via PM to antus. See the new for sale thread here: http://pcmhacking.net/forums/viewtopic.php?f=14&t=3616
Ordering Information: Ordering is via PM to antus. See the new for sale thread here: http://pcmhacking.net/forums/viewtopic.php?f=14&t=3616
Re: FS: USB Vehicle Data Interface
I got mine yesteday soldered it together. this was my first time at SMT, Definitely not for the faint of heart. I nearly buggered it a few times with my choad of an iron (well what iron doesnt look like a choad next to a 0.5mm pad on the pcb )
anyways got bult in about 2 hours and fired up and works beautifully, finally can ditch the 2 trans serial cable with all the data errors from electical noise and use a straight usb adapter. this one works perfect where my old one would be riddled with bad data packets
highly recommended
anyways got bult in about 2 hours and fired up and works beautifully, finally can ditch the 2 trans serial cable with all the data errors from electical noise and use a straight usb adapter. this one works perfect where my old one would be riddled with bad data packets
highly recommended
Re: FS: USB Vehicle Data Interface
I just bought one not long ago but already assembled and it works excellent
no probs with connection or anything unlike some other stuff ive seen
i would reccomend to anyone its money well spent.
i would never go back to a serial cable.
no probs with connection or anything unlike some other stuff ive seen
i would reccomend to anyone its money well spent.
i would never go back to a serial cable.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: FS: USB Vehicle Data Interface
yeah mines great no more connection issues when you rev the engine sucks a tune out good too hehe
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- TTVN
- Posts: 194
- Joined: Tue Jun 30, 2009 10:01 pm
- cars: TT 355 VN, Rearmount turbo 355 vp, cammed 355 hj60 landcruiser, vx clubby n efilive VZ ls1 wagon
Re: FS: USB Vehicle Data Interface
just to report my new one of these has much better connection than my old michaelgw unit
very happy thanks
very happy thanks
Re: FS: USB Vehicle Data Interface
Hi, I would like to order the USB ALDL Data Interface. How do I order it. Thanks.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: FS: USB Vehicle Data Interface
PM vl400
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: FS: USB Vehicle Data Interface
PM'd VL400
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: FS: USB Vehicle Data Interface
already bought that from you a while ago. i haven't had a lot of time lately cause of work. but now want to spend some time on learning. thanks
Re: FS: USB Vehicle Data Interface
These look awesome,
From what i gather it sounds like it will work with a VT V6 3.8 Berlina 1998 S1?
And with this and what program? will i be able to reset / clear SRS error codes?
From what i gather it sounds like it will work with a VT V6 3.8 Berlina 1998 S1?
And with this and what program? will i be able to reset / clear SRS error codes?