98 vt srs light
Re: 98 vt srs light
yeh i have been trying on my vs, ive been trying $FA and $F2 trying to get the same string as above to appear!
-
- Posts: 1217
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: 98 vt srs light
I sent this through using TunerPro 5 usin the ADX.
Listend for silence for 25ms, then send the command.
yoda69
I think this is basically what i had in it to work, is on my laptop and just as easy to do it again.Listend for silence for 25ms, then send the command.
yoda69
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 98 vt srs light
Can also try the v125 flashtool .. https://pcmhacking.net/forums/viewtopic.php?f=3&t=82
It has a new function that you can compose frames and send it (and also listen to chatter). It uses the user prefs for echo, com port listen for silence etc. Makes it easy if you want to just send a single command.
It has a new function that you can compose frames and send it (and also listen to chatter). It uses the user prefs for echo, com port listen for silence etc. Makes it easy if you want to just send a single command.
-
- Posts: 1217
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: 98 vt srs light
Wish I had of seen that first.
Would have been nice and easy.
Not sure what i'll do without the early morning chime.
Would have been nice and easy.
Not sure what i'll do without the early morning chime.
- Holden202T
- Posts: 10316
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 98 vt srs light
im sure you'll overcome it
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: 98 vt srs light
Hey awesome little program there
well doesn't appear to work on vs
when i send
F2,56,0A
it sends and recieves
F2, 56, A, AE,
when i send
F2,56,0A,A6
it sends and recieves
F2, 56, A, AE,
i tested it with normal codes like clearing ecu fault codes and it works fine.
well doesn't appear to work on vs
when i send
F2,56,0A
it sends and recieves
F2, 56, A, AE,
when i send
F2,56,0A,A6
it sends and recieves
F2, 56, A, AE,
i tested it with normal codes like clearing ecu fault codes and it works fine.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 98 vt srs light
It automatically does the checksum for you so both frames you sent would have been the same (the 56 meant the A6 would not have been sent), will have an option to not auto calc the checksum in the next release so you can send any frame you want.
Are you certain the fault is not current and you are clearing the code but its returning?
yoda69 - it was a new feature I only wrote last night, read this thread and thought it would be handy to release now. Was a little slow and could have saved you some work.
Are you certain the fault is not current and you are clearing the code but its returning?
yoda69 - it was a new feature I only wrote last night, read this thread and thought it would be handy to release now. Was a little slow and could have saved you some work.
Re: 98 vt srs light
yep i had a scantool from a mate and cleared mine last week, has been cleared all week
i just then disconnected the yellow plug under and column and turned the ignition on to set a code, then reconnected, then i turned it all on again with the code logged and tried to clear it. The light is solid not going off and back on again when i send the command.
Sorry im not real technical with aldl commands, ive only really ever played with efilive, havn't done any tuning etc.
i just then disconnected the yellow plug under and column and turned the ignition on to set a code, then reconnected, then i turned it all on again with the code logged and tried to clear it. The light is solid not going off and back on again when i send the command.
Sorry im not real technical with aldl commands, ive only really ever played with efilive, havn't done any tuning etc.
Re: 98 vt srs light
im just wondering if i ran a clip from the data pin on the scantool to the data pin on my connector and ran your program listing to chatter and sent a command from the scantool assuming you can without it being connected to the car would it pick it up?
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 98 vt srs light
If you can get the scan tool again, have both the flashtool hooked up and the scan tool. Have the flashtool listen for chatter and try and capture the reset command from the scan tool.
EDIT: Yep
EDIT: Yep