Would any body know or have some information crank/Sync trigger information for the vt/vx ecotech and l67. How many slots crank/cam disc have?? 18 crank 3 sync ?? like early ones
Thanks in advance
crank cam sensor information
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: crank cam sensor information
crank trigger is the same as the early commodores, cam sensor only picks up once every revolution to work out TDC.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: crank cam sensor information
Thanks Mate,
So let me get it straight is it 18 x Ref - 1 x Sync per revolution(360deg) or is 36 x ref 1 x Sync per cycle (720deg)
So let me get it straight is it 18 x Ref - 1 x Sync per revolution(360deg) or is 36 x ref 1 x Sync per cycle (720deg)
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: crank cam sensor information
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: crank cam sensor information
https://pcmhacking.net/forums/viewtopi ... 8&start=10 info in that thread
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem