Custom Tuned Bins
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
custom modified Holden Bin Files
heres a few modified holden bins
- Attachments
-
- 51$_scv6_vs_XU6_timing_aust.zip
- (41.04 KiB) Downloaded 1722 times
-
- crow 284 standard injectors.zip
- (8.96 KiB) Downloaded 1859 times
-
- 200kw VP clubby BDJH modded for cruiser 355.zip
- (9.61 KiB) Downloaded 1411 times
-
- 2bar $5D 5.0 commodore capa supercharged.zip
- (9 KiB) Downloaded 1394 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Custom Tuned Bins
vt s/c series one no vats
- Attachments
-
- CJKWnovat.rar
- (42.66 KiB) Downloaded 1272 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Custom Tuned Bins
Got this bin off a chip today says pxwer chip on the sticker and has 180kw written in pen on it but it was on a dodgy looking socketed memcal can anyone confirm it is a vn v8 pxwerchip
It says something about fueltronics hsv 180kw in hex editor
It says something about fueltronics hsv 180kw in hex editor
- Attachments
-
- vn v8 power chip.BIN
- ?
- (16 KiB) Downloaded 1296 times
- Doctor Bob
- Posts: 195
- Joined: Mon Mar 02, 2009 10:58 pm
- cars: VN, VT
- Location: Melbourne Vic.
- Contact:
Re: Custom Tuned Bins
Its a fueltronics, a SA company that was doing this kind of thing years ago, the guy concerned Martin Donnon is now doing a lot of LSx & f#rd LPG stuff
its probably ok to try out, nothing special though
Rob
its probably ok to try out, nothing special though
Rob
Re: Custom Tuned Bins
Ok cool thanks
Re: Custom Tuned Bins
Another one to look at
ssv vn vp v8
ssv vn vp v8
- Attachments
-
- ssv vn vp v8.zip
- ssv vn vp
- (8.92 KiB) Downloaded 1134 times
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Custom Tuned Bins
Attached are some formula holden and F3000 bins.
- Attachments
-
- formula holden v3B tech 1 7088 def4.zip
- (9.1 KiB) Downloaded 1109 times
-
- formula 3A $D000 (67a1)v3B Aug2 1989.zip
- (9.28 KiB) Downloaded 1019 times
-
- 5D_formula_holden_no02_noknock_7200_crazyspark.zip
- (9.27 KiB) Downloaded 1162 times
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Custom Tuned Bins
love the description on that last file "crazy spark"
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Custom Tuned Bins
Hi guys thought id share some tunes most of these done on the dyno
- Attachments
-
- 284crane cam vs 5litre manual.zip
- (16.49 KiB) Downloaded 1701 times
-
- 276crane cam vs 5litre manual.zip
- (16.44 KiB) Downloaded 1245 times
-
- 276crane cam vs 5litre auto.zip
- (31.03 KiB) Downloaded 1342 times
-
- VRV8AUTO276cranecam.zip
- (30.95 KiB) Downloaded 1274 times
-
- VRV8AUTO284cranecam.zip
- (27.44 KiB) Downloaded 1287 times
-
- VRV87000RPM286crane cam.zip
- (30.96 KiB) Downloaded 1754 times
-
- Posts: 2
- Joined: Mon Jan 03, 2011 12:35 pm
- cars: vk v8 calais
hx v8 panelvan
hz v8 ute
hq v8 gts munro
hq v8 statesman
hz v8 statesman
Re: Custom Tuned Bins
as these are great starting points to work from
is there any chance someone could do up a basic stock v8 setup without needing sensors/security etc for those people that are looking at fuel injected their old v8s like myself more then likely for now im running 308 with vn v8 heads vn v8 wiring and a camira computer well shortly just got to get fuel pump and throttle body all the wiring i think ive done properly got the camira computer and everything else wired up ready for head and manifold change except fuel pump and finishing of the fuel lines (gets tricky when you decide to do this to a car you drive everyday) and once i have the injection running and i know the wiring is good and everything is working then ill be hopefully finishing my other little motor build which will be replacing the stock motor currently in the car
so ive spent a few hours going through this website so far but figured looking at the other starting points i didnt notice any plain stock v8s without the sensors or whatever that abbreviation is for them that ive seen posted
o and feel free to pm me if you feel like making one just in case i cant work out how to get back to this thread
thankyou all this website is great so far heaps of useful info
is there any chance someone could do up a basic stock v8 setup without needing sensors/security etc for those people that are looking at fuel injected their old v8s like myself more then likely for now im running 308 with vn v8 heads vn v8 wiring and a camira computer well shortly just got to get fuel pump and throttle body all the wiring i think ive done properly got the camira computer and everything else wired up ready for head and manifold change except fuel pump and finishing of the fuel lines (gets tricky when you decide to do this to a car you drive everyday) and once i have the injection running and i know the wiring is good and everything is working then ill be hopefully finishing my other little motor build which will be replacing the stock motor currently in the car
so ive spent a few hours going through this website so far but figured looking at the other starting points i didnt notice any plain stock v8s without the sensors or whatever that abbreviation is for them that ive seen posted
o and feel free to pm me if you feel like making one just in case i cant work out how to get back to this thread
thankyou all this website is great so far heaps of useful info