VE Instrument Cluster EEPROM Programming
Re: VE Instrument Cluster EEPROM Programming
works for me on win10, perhaps you might need a newer .net version. try installing .net4 perhaps.
Re: VE Instrument Cluster EEPROM Programming
Ve series 1 bin file odometer editor
Use at own risk!
No file checking will write to any file selected
Creates a back up but overwrites it on the next write
Sorry if not allowed
Use at own risk!
No file checking will write to any file selected
Creates a back up but overwrites it on the next write
Sorry if not allowed
Last edited by mattyjf01 on Wed Feb 07, 2024 1:49 pm, edited 1 time in total.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VE Instrument Cluster EEPROM Programming
Ve Series 2 odometer
KMs
Start__End__Range__Checksum & ^FF
65536 81919 16383 DB24
10000 13FFF 3FFF
81920 106495 24575 A758
14000 19FFF 5FFF
106496 131071 24575 8F70
1A000 1FFFF 5FFF
131072 139263 8191 DF20
20000 21FFF 1FFF
139264 163839 24575 B748
22000 27FFF 5FFF
163840 180223 16383 AF50
28000 2BFFF 3FFF
180224 221183 40959 ?
2C000 35FFF 9FFF
221184 245759 24575 1FE0
36000 3BFFF 5FFF
245760 294911 49151 ?
3C000 47FFF BFFF
294912 319487 24575 D629
48000 4DFFF 5FFF
0 kms
F50A EA15 D42B A857
50AF A15E 42BD 857A
0AF5 15EA 2BD4 57A8
AF50 5EA1 BD42 7A85
Ive worked out how it Calculates the km
But cant see the pattern for the checksum except the High byte low byte xor FF
KMs
Start__End__Range__Checksum & ^FF
65536 81919 16383 DB24
10000 13FFF 3FFF
81920 106495 24575 A758
14000 19FFF 5FFF
106496 131071 24575 8F70
1A000 1FFFF 5FFF
131072 139263 8191 DF20
20000 21FFF 1FFF
139264 163839 24575 B748
22000 27FFF 5FFF
163840 180223 16383 AF50
28000 2BFFF 3FFF
180224 221183 40959 ?
2C000 35FFF 9FFF
221184 245759 24575 1FE0
36000 3BFFF 5FFF
245760 294911 49151 ?
3C000 47FFF BFFF
294912 319487 24575 D629
48000 4DFFF 5FFF
0 kms
F50A EA15 D42B A857
50AF A15E 42BD 857A
0AF5 15EA 2BD4 57A8
AF50 5EA1 BD42 7A85
Ive worked out how it Calculates the km
But cant see the pattern for the checksum except the High byte low byte xor FF
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VE Instrument Cluster EEPROM Programming
hi ive done a eeprom dump from a series 2 cluster but my file looks to be only half the size of the others here
- Attachments
-
- statesman dash.BIN
- (560 Bytes) Downloaded 197 times
Re: VE Instrument Cluster EEPROM Programming
What are you using to read?jca wrote:hi ive done a eeprom dump from a series 2 cluster but my file looks to be only half the size of the others here
Are you selecting the right chip?
Is this around 190960 kms?
Last edited by mattyjf01 on Sun Oct 31, 2021 9:57 pm, edited 1 time in total.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VE Instrument Cluster EEPROM Programming
Hi I selected 24c epprom , dash shows 566,000kms
Re: VE Instrument Cluster EEPROM Programming
I think ic is 24c16jca wrote:Hi I selected 24c epprom , dash shows 566,000kms
Rolling VDO algo
They start at F50A then count down
got it backwards
562228km
Last edited by mattyjf01 on Mon Nov 01, 2021 10:35 am, edited 1 time in total.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VE Instrument Cluster EEPROM Programming
Hi , would anybody have a bin file with these software numbers?
Re: VE Instrument Cluster EEPROM Programming
This is the chip on the cluster no matter what I select I can't get it to write the 2mb file to the chip and come back successfull I'm trying to right the Calais bin above
Re: VE Instrument Cluster EEPROM Programming
24c04 = 0x0200jca wrote:This is the chip on the cluster no matter what I select I can't get it to write the 2mb file to the chip and come back successfull I'm trying to right the Calais bin above
24c16 = 0x0800
Use HXD to trim the file down to 0x0200
and your bin file looks like it has errors
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203