LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
the baud rate the cable uses will be really high, like 230400 sort of high... which adx were you using? the standard one or the DPID one? the only way I can think of help is to get you do monitor the serial port while trying to use the adx...
-
- Posts: 10
- Joined: Tue Dec 03, 2013 8:37 am
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
AVT-852
So should I set the baud rate to max in the OS? I think I tried that earlier.
I'm in the process of installing SUDT as antus suggested. I'll forward you both the log files as soon as I get some.
Thanks!!!
So should I set the baud rate to max in the OS? I think I tried that earlier.
I'm in the process of installing SUDT as antus suggested. I'll forward you both the log files as soon as I get some.
Thanks!!!
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
No, in the case of the AVT devices the virtual comport just runs at USB speed regardless of the setting. Thus the speed setting can be ignored.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- durahax
- Posts: 34
- Joined: Sat May 12, 2012 3:00 am
- cars: 03 GMC Sierra 2500HD - LB7 Duramax Diesel
- Location: Philadelphia, PA
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
It works, walking out the door right now but it works in ALDLdroid with a AVT-855! I'm trying on a Duramax PCM but it works I can see all the data on the bus. Now I have a reason to finish my ADX.
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
so I played around with my DPID adx and got it working. was a few differences with how aldldroid handled align to header, so had to use an avt filter instead and rejigger all the packet alignments. its now vpwdroid hahaha.
also updated first post with new adx.
also updated first post with new adx.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
nice lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
Awesome! Screenshots?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
thought I had an adx error with speedo showing 0kph. turns out in aldldroid I chose the gps speedo and left the gps off
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
Good stuff!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: LS1 ADX V1.6 to suit Tunercat OBD2 Cable, AVT 852
Sorry for thread hopping didn't want to clutter your other thread.
If I log my VZ LS1 with this ADX. What would the throttle position be displayed as?
Now I'm more keen to get an AVT852. Got wideband already.
Besides tuner cats what would you recomend to re flash my 1mb PCM?
If I log my VZ LS1 with this ADX. What would the throttle position be displayed as?
Now I'm more keen to get an AVT852. Got wideband already.
Besides tuner cats what would you recomend to re flash my 1mb PCM?