FS: ECM USB Comms
-
- Posts: 13
- Joined: Thu Mar 05, 2015 7:48 pm
- cars: Too many... vs, wl, hj, hz, wb, gq...
Re: FS: ECM USB Comms
No I don't.
-
- Posts: 13
- Joined: Thu Mar 05, 2015 7:48 pm
- cars: Too many... vs, wl, hj, hz, wb, gq...
Re: FS: ECM USB Comms
Ok, so I can see two options, 1; take the nvram out and plug it into where the memcal goes in the vg's original computer, it looks like the same plug there, or 2; re-pin the harnes plug to suit the later model computer.. option one seems too easy so im hesitant already!
Re: FS: ECM USB Comms
for option 1, you need to reburn the nvram in an eprom burner with 12P (manual code) and get one of these comms boards from the start of this thread and solder onto the 808.
for option2, you can get both wiring diagrams and match up the pin swaps. I generally label every wire with where it came from and where its going, then pull all the pins out and put them back in the right order for the new pcm.
for option2, you can get both wiring diagrams and match up the pin swaps. I generally label every wire with where it came from and where its going, then pull all the pins out and put them back in the right order for the new pcm.
-
- Posts: 13
- Joined: Thu Mar 05, 2015 7:48 pm
- cars: Too many... vs, wl, hj, hz, wb, gq...
Re: FS: ECM USB Comms
Option 2 it is for now then. Thanks very much for helping a newbie to everyone who posted.
Ps, Jayme, re usb comms, pm sent.
Ps, Jayme, re usb comms, pm sent.
Re: FS: ECM USB Comms
Who is the best to contact to purchase from?
Re: FS: ECM USB Comms
Can this USB board work with a 1227730 ECM?
Re: FS: ECM USB Comms
how do I go about getting one of these ECM USB Comms
Re: FS: ECM USB Comms
Opening post says to contact Jayme.
Re: FS: ECM USB Comms
Apologies missed the pm.
Re: FS: ECM USB Comms
Hey all,
Could someone in the know please tell me if there is any performance increase/decrease between connecting to a '165 ECU via the ALDL port vs connecting to an '808 + USB Comms board, or will performance be exactly the same for both read & write operations?
Thanks.
Chuff
Could someone in the know please tell me if there is any performance increase/decrease between connecting to a '165 ECU via the ALDL port vs connecting to an '808 + USB Comms board, or will performance be exactly the same for both read & write operations?
Thanks.
Chuff
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs