Little workshop of horrors
Little workshop of horrors
Psyolent's post about servicing his outlaws car inspired me to record some of the abuse we see here in our shop, It will show how customer expectations of vehicles and their components are no where near reality...
Please feel free to add your own
Removed from a 2011 Mitsubishi Outlander, Customer - "Just needs a basic service"....
Ford Courier, this will shit coils now...
Please feel free to add your own
Removed from a 2011 Mitsubishi Outlander, Customer - "Just needs a basic service"....
Ford Courier, this will shit coils now...
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8257
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Little workshop of horrors
I hope you dont mind me posting in this thread, but ive got this one story and its not really worth its own. A mates car "Its too hard.... 15psi with no intercooler will be fine - i'll install a big radiator to keep it cool". He hasnt opened the heads on the previous engine yet to see whats inside but he has pulled the plugs.
"found out why the old engine hit a wall at 4000rpm" "but the car with the new engine feels like theres no boost - can you see anything sus in these logs?" (im also a bit sus of the low TPS readings, but ive not seen the car yet) "I found the problem...."
"found out why the old engine hit a wall at 4000rpm" "but the car with the new engine feels like theres no boost - can you see anything sus in these logs?" (im also a bit sus of the low TPS readings, but ive not seen the car yet) "I found the problem...."
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7810
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Little workshop of horrors
250 x flow ford. All cyliners had cracks on the chambers and water pissed out the sides of the head like no gasket was even installed.
totally toast
One of my old boss's transit van his guys drove and cooked it and then kept driving it until it almost caught fire. Dumb ass musos.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Little workshop of horrors
This is from a 2009 Subaru Forrester Turbo
This is a swivel hub bearing from an old 60 series Landcrusher that went to many other workshops with the complaint of 'tram tracking', many thousands of dollars later it came to us and we found these...
This is a swivel hub bearing from an old 60 series Landcrusher that went to many other workshops with the complaint of 'tram tracking', many thousands of dollars later it came to us and we found these...
According to chemistry, alcohol is a solution...
Re: Little workshop of horrors
That's common on Cruisers.
Wish I took a pic of it but back in 2009 we had a customer who come in with a 75 series trayback complaining his brakes were pulling to the right. Pulled all 4 wheels off and found the left hand front disc had disintegrated with part of it jammed in the caliper so the caliper worked but the disc having come apart meant it didn't control the wheel speed. This is also apparently a common thing with 75 series but I have only seen it once.
Wish I took a pic of it but back in 2009 we had a customer who come in with a 75 series trayback complaining his brakes were pulling to the right. Pulled all 4 wheels off and found the left hand front disc had disintegrated with part of it jammed in the caliper so the caliper worked but the disc having come apart meant it didn't control the wheel speed. This is also apparently a common thing with 75 series but I have only seen it once.
- vlad01
- Posts: 7810
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Little workshop of horrors
I laugh every time I see that valve. Its sooo tiny! iirc a bit smaller than a 20c coin lol
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7810
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Little workshop of horrors
I kept this one. From a member of another forum years ago where I warned him against breaking the ball joints and possibly killing someone by slamming the type 3 by removing the bump stops to get it extra low. Said I was talking shit when I pointed out the ball joint were going to bind up and take the full impact of the bumps in the road.
few weeks latter going to a show.. douche bag award goes to ...
After all that. I was still wrong apparently.
few weeks latter going to a show.. douche bag award goes to ...
After all that. I was still wrong apparently.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Little workshop of horrors
Antus tell your mate to make sure he tightens the plug properly. That is a classic example of overheating plug electrodes leading to some serious detonation.
Re: Little workshop of horrors
can you just put my wheel back on haha he was angry when i said no.
Re: Little workshop of horrors
it uses a bit of oil and is down on power any idea where to start looking