Box Trailer Rebuild
- antus
- Site Admin
- Posts: 8258
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Box Trailer Rebuild
That came out pretty nice. Almost a new trailer but quite cool that its still got the soul of the original where it made sense. Should last a long time.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Box Trailer Rebuild
Looks great there firebug.
However, sorry to be the bearer of bad news but you have welded your draw bar the wrong way. By welding across the drawer bar you actually create a stress concentrator and it will generally crack right along the weld. This is a very common mistake and can lead to a serious failure.
I know you have painted the trailer and all BUT, to fix weld the drawer bar to the front support along the length of the drawer bar and then cut the welds you have done on the front and rear of this join. This will stop the stress riser and therefore allow it to have a great life. If you need extra strength in this area then place an upright between the front support and the drawer bar vertically and weld only in the vertical plain.
Above all the trailer is very neat. Also so glad that the angle grinder did not cause any human damage. That could have been nasty.
cheers
oldn64
However, sorry to be the bearer of bad news but you have welded your draw bar the wrong way. By welding across the drawer bar you actually create a stress concentrator and it will generally crack right along the weld. This is a very common mistake and can lead to a serious failure.
I know you have painted the trailer and all BUT, to fix weld the drawer bar to the front support along the length of the drawer bar and then cut the welds you have done on the front and rear of this join. This will stop the stress riser and therefore allow it to have a great life. If you need extra strength in this area then place an upright between the front support and the drawer bar vertically and weld only in the vertical plain.
Above all the trailer is very neat. Also so glad that the angle grinder did not cause any human damage. That could have been nasty.
cheers
oldn64
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: Box Trailer Rebuild
man that come out awesome.
wow thats interesting, i guess my 6x4 i've had for the last 20 years is doomed huh? is there any FEA or engineering articles to support this dude?However, sorry to be the bearer of bad news but you have welded your draw bar the wrong way. By welding across the drawer bar you actually create a stress concentrator and it will generally crack right along the weld. This is a very common mistake and can lead to a serious failure.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: Box Trailer Rebuild
guess there is
http://www.trailersauce.co.nz/trailer-p ... r/drawbar/
http://www.trailersauce.co.nz/trailer-p ... r/drawbar/
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Re: Box Trailer Rebuild
Good looking trailer indeed, good for another 25 at least.
I stuck an SBC in a HR early 80's, had to get it engineer approved, which led to understanding of the do's & don'ts regarding welding of anything chassis related, welding across ways was one of the no-no's, welding had to be front to back only, actually found some of the relevant paperwork in the last cleanup here.psyolent wrote:man that come out awesome.
wow thats interesting, i guess my 6x4 i've had for the last 20 years is doomed huh? is there any FEA or engineering articles to support this dude?However, sorry to be the bearer of bad news but you have welded your draw bar the wrong way. By welding across the drawer bar you actually create a stress concentrator and it will generally crack right along the weld. This is a very common mistake and can lead to a serious failure.
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: Box Trailer Rebuild
bewdiful. thanks ken.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Box Trailer Rebuild
wow you've done a great job! certainly alot more effort than i put into it!!
to be fair i wanted a larger trailer so found it hard to justify any time spent when it would never be larger, and going to a larger width meant a new axle, and basically a whole trailer which made the cost not worth it.
at one point i recall having 2 x v6's, 1 x T700, 1 x 202 and various heads and parts to fill the gaps when i was moving house, so im not at all surprised if there is any bends in chassis hehehe
and to answer your question, straps under the front sides, around the draw bar then back on themselves (there is a gap between the draw bar and floor)
there also used to be bolts through the sides to hold the guards, this gave 3 points, front, top centre and rear of the guards.
at the rear there was bumper things to stop the trailer hitting the ground, these were good for attachment points also.
lastly was the number plate holder frame it was handy for attaching hooks etc to
and from memory the year on the rego papers is 1978 so its been around for a while!
to be fair i wanted a larger trailer so found it hard to justify any time spent when it would never be larger, and going to a larger width meant a new axle, and basically a whole trailer which made the cost not worth it.
at one point i recall having 2 x v6's, 1 x T700, 1 x 202 and various heads and parts to fill the gaps when i was moving house, so im not at all surprised if there is any bends in chassis hehehe
and to answer your question, straps under the front sides, around the draw bar then back on themselves (there is a gap between the draw bar and floor)
there also used to be bolts through the sides to hold the guards, this gave 3 points, front, top centre and rear of the guards.
at the rear there was bumper things to stop the trailer hitting the ground, these were good for attachment points also.
lastly was the number plate holder frame it was handy for attaching hooks etc to
and from memory the year on the rego papers is 1978 so its been around for a while!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Box Trailer Rebuild
I Have seen way too many accidents that are caused by welding the drawbar across the front. This does not mean every one will but it give a higher stress concentration. To err on the side of caution it is best practise to not weld there. Yes there is many documents on this and I could dig up the actual trailer standards which I have seen it is previously.psyolent wrote:wow thats interesting, i guess my 6x4 i've had for the last 20 years is doomed huh? is there any FEA or engineering articles to support this dude?
Here is a prime example. There are alot of people who state that HQ pattern is the same as commodore. It actually is not. The commodore is the closest metric equivalent but is not exactly the same. What this means is that HQ rims on a Commodore rotor stresses the stud in the worse way (shear). Unfortunately stud have stress concentrators in them due to the threads so any force in shear can result in the stud breaking through the threads. Does every stud break when hq is used, no. Has it happened where the studs do break, certainly, and have I experienced this.... YES.
All I am saying is being the mechanical eng and electrical eng I am there are some things i have just learnt to do a certain way to remove the risk. After all how would you feel if your draw bar fractured off and it ran into a human???
Cheers
oldn64
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: Box Trailer Rebuild
not doubting you mate, i question everything its just the way i am wired - as you can see above both myself and ken researched to backup your claim which is completely valid dude.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: Box Trailer Rebuild
All good was not offended more adding to the discussionpsyolent wrote:not doubting you mate, i question everything its just the way i am wired - as you can see above both myself and ken researched to backup your claim which is completely valid dude.
cheers
oldn64