pcmhacking.net

Hi all, im going to be tuning a VX s/c soon so in preparation, I have made a VX s/c engine and trans adx. thanks to VL400 for his help with the datastream info, it is based on the VS one, modified with the extra items and different DTC's that the vx s/c datastream has. so far it has only been tested on the bench (thanks antus) and is confirmed to log on VT s/c and VX s/c. Although it is for the VX, the VT (A5) datastream will work also. So if anyone wants to try it and report back, that will be great.

A5 and A6 (VT - VY V6 and V8 excluding flash PCMs and including S/C) engine and trans.

UPDATES:
V1.05 - Modified connection macro for logging via oseplugin when tuning.
V1.04 - Added 'Reset Malfs' send command
V1.03 - Changed spark advance to signed for negative values
V1.02 - Fixed for TP 5.00.7575.00, tested on VT V6 using native TP logging engine

sweet i will give it a try on a s/c vt tomorrow and report back!

Updated the ADX with some ideas from VL400, it now wait for the heartbeat, then sends out a disable chatter command, then retries up to 5 times. also added the data header frames to the listen for data commands so it should ignore any packets filled with crap (hopefully no more random values).

Updated the ADX to allow connection when using oseplugin for tuning.

Hi Jayme, I'm new to this and I'm looking for a ADX file to suit my standard 2000 VT V6 Auto Acclaim to enable me to read the engine data and fault codes with TunerPro V5. Can you help with this?

Kindest Regards

Steve

faq page would be a good start.
http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396

You can use enhanced which will have adx's in the packages here
http://pcmhacking.net/forums/viewtopic.php?f=27&t=2518

Do any of the files work with any andriod apps?
If so what app works best?
And what file will i need for a '99 VT S1 commodore with 5speed manual and a 315 low BCM?

Any info much appreciated,
Josh.