VR V6 Memcal Bin Grabbed - How to read
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VR V6 Memcal Bin Grabbed - How to read
Morning,
Is the flash chip the one that I got recently, that has the no noticeable difference?
Can I write back to the chip via aldl?
How do I decide on a tune
Cheers
Pete
Is the flash chip the one that I got recently, that has the no noticeable difference?
Can I write back to the chip via aldl?
How do I decide on a tune
Cheers
Pete
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: VR V6 Memcal Bin Grabbed - How to read
The 27SF512 is a flash chip
Probably best to get yourself Eprom Programmer
Just modify what you already have or start from a stock Holden bin. You will learn a lot that way.
Probably best to get yourself Eprom Programmer
Just modify what you already have or start from a stock Holden bin. You will learn a lot that way.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VR V6 Memcal Bin Grabbed - How to read
Hi
Sounds like a good idea.
Are these in the for sale section?
Sounds like a good idea.
Are these in the for sale section?
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: VR V6 Memcal Bin Grabbed - How to read
Yes the flash chip is the new one. You still need the burner but you won't need an eraser.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VR V6 Memcal Bin Grabbed - How to read
you can only write back over aldl if you have an operating system on the car that supports it, nvram hardware and a modded pcm. you cant write the eeprom chip you have over aldl. It sounds like your pretty new to this, I suggest you hit the FAQ (green button up near the top right) and have a look at the guides and see if it starts making sense. Short version is you need tunerpro, a bin as starting point (the version kojab posted), and the matching xdf to edit it. you need a matchinhg adx to pull data from the car while its running. These questions have been asked a lot of times, you should be able to learn a lot from the guides and some of the Q&A in the FAQ.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VR V6 Memcal Bin Grabbed - How to read
Hi
Does any one have a link to a burner you'd recommend?
The cheaper the better.
Cheers
Pete
Does any one have a link to a burner you'd recommend?
The cheaper the better.
Cheers
Pete
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VR V6 Memcal Bin Grabbed - How to read
Hi Antus,antus wrote:you can only write back over aldl if you have an operating system on the car that supports it, nvram hardware and a modded pcm. you cant write the eeprom chip you have over aldl. It sounds like your pretty new to this, I suggest you hit the FAQ (green button up near the top right) and have a look at the guides and see if it starts making sense. Short version is you need tunerpro, a bin as starting point (the version kojab posted), and the matching xdf to edit it. you need a matchinhg adx to pull data from the car while its running. These questions have been asked a lot of times, you should be able to learn a lot from the guides and some of the Q&A in the FAQ.
Yes I'm pretty new to this. I now know how to pull Bins from ecm, potentially adjust parameters by sliding bars ect.
I have recently learnt to open the Bin.
Add items to sensor data.
Very new otherwise.
Learning to be done
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: VR V6 Memcal Bin Grabbed - How to read
Morning,
I've looked on ebay.
Does any one have a burner listing they recommend?
Cheers
Pete
I've looked on ebay.
Does any one have a burner listing they recommend?
Cheers
Pete
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VR V6 Memcal Bin Grabbed - How to read
This is an aussie seller, good quality product. https://darkwire.com.au/shop/ols/produc ... programmer
You can probably go a little cheaper on ebay for any type of minipro programmer, but you'll most likely be waiting a while for shipping from China and even though the ones Ive seen work fine, you never know exactly for sure whats going to arrive and generally you wouldnt want to trust anything on the cd included and go to the official web site instead. The software is OK, but not exactly newbie friendly.
You can probably go a little cheaper on ebay for any type of minipro programmer, but you'll most likely be waiting a while for shipping from China and even though the ones Ive seen work fine, you never know exactly for sure whats going to arrive and generally you wouldnt want to trust anything on the cd included and go to the official web site instead. The software is OK, but not exactly newbie friendly.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: VR V6 Memcal Bin Grabbed - How to read
From my experience cheapest is not always best. I see Darkwire is on holidays but they are quality. China makes some really good rubbish.