Hi guys,
There are three tables and a Scalar which are labelled
1. Injector - Offset Vs Battery Voltage (msec units).
2. Injector - Low pulse width Offset Vs Base pulse width.(msec units).
3. Injector - Multiplier Vs RPM & Cylair.
4. Injector - Fuel Boundry Located this CAL after 3X REF. (Scalar).
I was wondering what is actually being altered by these tables. are they adjusting the injector Pulse Width ?
What is the Scalar table actually for and what does that adjust ?
Does anyone actually have a BOSCH injector data specs sheet for the 0280 155 777 Injectors That I could get a copy of by any chance?
Injector Offset & Multiplyer - What does it adjust?
-
- Posts: 29
- Joined: Sat Aug 02, 2014 12:49 pm
- cars: vx calais ls1 cammed 280rwkw
Turbo wh v6 statesman power unknow - Location: Queensland Proserpine
- Contact:
Re: Injector Offset & Multiplyer - What does it adjust?
I know from experimenting on mine that if I make injector offset vs battery voltage lager car runs richer and smaller car runs leaner
-
- Posts: 3440
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: Injector Offset & Multiplyer - What does it adjust?
A cars voltage fluctuates so there needs to be a table to compensate and adjust the opening time to maintain stable AFR's.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Injector Offset & Multiplyer - What does it adjust?
Yep. 1 and 2 is to charicterise the opening times of the injector against those to factors that make it fluctuate (1) and non-linear (2). (3) is more general purposes. (4) I am not sure, but it sounds like an internal value relating to how other tables function. I would not touch that one.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396