Just seeing what people are cdeveloping
-
- Posts: 39
- Joined: Mon Sep 07, 2020 8:07 pm
- cars: wh statesman
vy ss
vt ss
vx clubsport
vt clubsport
vy clubsport
Just seeing what people are cdeveloping
hi i was wondering if anyone needing help with there development atm im thinking of creating a tool to be able to use obdx pro vt with tech2win
Re: Just seeing what people are cdeveloping
Good luck.
You need to make a j2534 dll to communicate with tech2win,and than translate the output of dll to obdxpro. The J protocol is also non standard used by tech2win.
You need to make a j2534 dll to communicate with tech2win,and than translate the output of dll to obdxpro. The J protocol is also non standard used by tech2win.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Just seeing what people are cdeveloping
The protocol is standard, just not the most common J2534. Its ISO 22900-2 D-PDU. https://www.iso.org/standard/41276.html (first 10 pages preview) https://www.sis.se/api/document/preview/69232/
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 39
- Joined: Mon Sep 07, 2020 8:07 pm
- cars: wh statesman
vy ss
vt ss
vx clubsport
vt clubsport
vy clubsport
Re: Just seeing what people are cdeveloping
yer i have to pay for that was hoping someone would share also the first link isnt in english
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: Just seeing what people are cdeveloping
Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.
Tazzi is still (?) working on the J2534 support.
Tazzi is still (?) working on the J2534 support.
Re: Just seeing what people are cdeveloping
The J2534 side I am, I have been bogged down with OBDX development along with helping implementation of future support for E38 and newer ecus into lsdroidMudDuck514 wrote:Tech2Win uses the ISO 22900-2 Diagnostic-Protocol Data Unit (D-PDU) API and RP1210 API.
Tazzi is still (?) working on the J2534 support.
I have the J2534 dll 99% completed. It does recognise with J2534 application including pcmhammer, GM ACDELCO, GDS2 ect. I still have a few commands that the dealer software are calling to which I have not added yet, but appears to be at least doing all the 'major' commands.
The D-PDU is similar to that of J2534 where there is a standardized command set. Difference being there is different commands and requirements for returned data.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 39
- Joined: Mon Sep 07, 2020 8:07 pm
- cars: wh statesman
vy ss
vt ss
vx clubsport
vt clubsport
vy clubsport
Re: Just seeing what people are cdeveloping
Ok so no point working on will you be releasing this any time soon or do you need help with it
Re: Just seeing what people are cdeveloping
I am not working on the D-PDU api.modzer321 wrote:Ok so no point working on will you be releasing this any time soon or do you need help with it
Only the J2534, but this is closed source so its coding is not available to the public.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 39
- Joined: Mon Sep 07, 2020 8:07 pm
- cars: wh statesman
vy ss
vt ss
vx clubsport
vt clubsport
vy clubsport
Re: Just seeing what people are cdeveloping
are you going to release what you made or no
Re: Just seeing what people are cdeveloping
Oh course, otherwise there would be no point making itmodzer321 wrote:are you going to release what you made or no
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726