I will have to check this out to make sure its not playing up.kojab wrote:I posted this on another thread recently. Might be causing your high idle
Check your TPS closed throttle Voltage. Should be around 0.7V - 0.8V approx. Typically it is less than 1 Volt.
Just set the closed TPS voltage to 0.7V making sure you are using a good earth. After starting the engine or cycling the IGN key the TPS voltage should automatically read 0%
This high idle only started after installing the new iac valve on sunday.
But, until i re - install the old one, or check the tps, i wont know exactly.
cheers
Pete