help with pcm hammer
-
- Posts: 12
- Joined: Thu Sep 28, 2023 12:25 pm
- cars: 2003 Chevy silverado
help with pcm hammer
I' been using pcm hammer for a few weeks now with no problems, tried using it today and all i keep getting is this
[08:01:27:862] Requesting operating system ID...
[08:01:38:806] Operating system request failed, checking for a live kernel...
[08:01:44:742] Checking for recovery mode...
[08:01:55:526] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:01:55:536] Unlock may not work, but we'll try...
[08:01:57:884] Unlock was not successful.
Am I doing something wrong!!
[08:01:27:862] Requesting operating system ID...
[08:01:38:806] Operating system request failed, checking for a live kernel...
[08:01:44:742] Checking for recovery mode...
[08:01:55:526] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:01:55:536] Unlock may not work, but we'll try...
[08:01:57:884] Unlock was not successful.
Am I doing something wrong!!
- antus
- Site Admin
- Posts: 8258
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help with pcm hammer
The pcm isnt responding. It is possible you have a wiring problem, software problem, hardware problem or the pcm is dead.
Check your connections, drivers, etc. We need a lot more info to help more. Type of pcm, type of interface, debug log.
When did it last work? What has changed since then?
Check your connections, drivers, etc. We need a lot more info to help more. Type of pcm, type of interface, debug log.
When did it last work? What has changed since then?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 12
- Joined: Thu Sep 28, 2023 12:25 pm
- cars: 2003 Chevy silverado
Re: help with pcm hammer
Its a p59 with Os 12579405 i tried to remove vats and it worked yesterday debug log...thanks for the help I'm going to check the wiring
[08:01:07:887] PCM Hammer 020
[08:01:07:892] ElmDevice initialization starting.
[08:01:07:915] TX:
[08:01:07:927] TX: AT Z
[08:01:08:794] ELM327 v1.4b
[08:01:08:797] TX: AT E0
[08:01:08:809] AT E0 OK
[08:01:08:813] TX: AT S0
[08:01:08:824] OK
[08:01:08:826] TX: AT RV
[08:01:08:840] Voltage: 12.5V
[08:01:08:846] TX: AT I
[08:01:08:856] Elm ID: ELM327 v1.4b
[08:01:08:862] Initializing PcmHacking.AllProDeviceImplementation
[08:01:08:863] TX: AT #1
[08:01:08:872] This is not an AllPro device.
[08:01:08:873] Determining whether PcmHacking.ScanToolDeviceImplementation is connected.
[08:01:08:875] TX: ST I
[08:01:08:889] ScanTool device ID: STN1130 v5.6.19
[08:01:08:895] TX: STPTO 3000
[08:01:08:903] OK
[08:01:08:904] TX: AT AL
[08:01:08:919] OK
[08:01:08:922] TX: AT SP2
[08:01:08:936] OK
[08:01:08:937] TX: AT DP
[08:01:08:953] SAE J1850 VPW
[08:01:08:955] TX: AT AR
[08:01:08:967] OK
[08:01:08:969] TX: AT AT0
[08:01:08:984] OK
[08:01:08:985] TX: AT SR F0
[08:01:09:000] OK
[08:01:09:002] TX: AT H1
[08:01:09:017] OK
[08:01:09:018] TX: AT ST 20
[08:01:09:032] OK
[08:01:27:736] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune with vats removed.bin
[08:01:27:777] Validating 1024k file.
[08:01:27:783] Start End Stored Needed Verdict Segment Name
[08:01:27:794] 00000 FFFFD 322D 322D Good Operating system
[08:01:27:800] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:01:27:806] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:01:27:812] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:01:27:821] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:01:27:830] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:01:27:839] 1F192 1FB4F DB8D DB8D Good System
[08:01:27:852] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:01:27:862] Requesting operating system ID...
[08:01:27:880] Setting timeout for ReadProperty, 25 ms.
[08:01:27:883] TX: STPTO 25
[08:01:27:892] OK
[08:01:27:905] TX: STPX H:6C10F0, R:1, D:3C0A
[08:01:29:039] Timeout during receive.
[08:01:29:054] Sending 'test device present' notification.
[08:01:29:057] Setting timeout for Minimum, 0 ms.
[08:01:29:059] TX: STPTO 0
[08:01:29:077] OK
[08:01:29:078] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:29:092] Empty response to STPX with data. OK.
[08:01:29:093] Setting timeout for ReadProperty, 25 ms.
[08:01:29:094] TX: STPTO 25
[08:01:29:108] OK
[08:01:30:143] Timeout during receive.
[08:01:30:143] Sending 'test device present' notification.
[08:01:30:144] Setting timeout for Minimum, 0 ms.
[08:01:30:145] TX: STPTO 0
[08:01:30:149] OK
[08:01:30:149] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:30:165] Empty response to STPX with data. OK.
[08:01:30:166] Setting timeout for ReadProperty, 25 ms.
[08:01:30:166] TX: STPTO 25
[08:01:30:182] OK
[08:01:31:217] Timeout during receive.
[08:01:31:219] Sending 'test device present' notification.
[08:01:31:221] Setting timeout for Minimum, 0 ms.
[08:01:31:224] TX: STPTO 0
[08:01:31:239] OK
[08:01:31:241] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:31:254] Empty response to STPX with data. OK.
[08:01:31:257] Setting timeout for ReadProperty, 25 ms.
[08:01:31:258] TX: STPTO 25
[08:01:31:270] OK
[08:01:32:310] Timeout during receive.
[08:01:32:312] Sending 'test device present' notification.
[08:01:32:313] Setting timeout for Minimum, 0 ms.
[08:01:32:314] TX: STPTO 0
[08:01:32:327] OK
[08:01:32:328] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:32:342] Empty response to STPX with data. OK.
[08:01:32:344] Setting timeout for ReadProperty, 25 ms.
[08:01:32:344] TX: STPTO 25
[08:01:32:359] OK
[08:01:33:398] Timeout during receive.
[08:01:33:399] Receive timed out. Attempt #5, Timeout #5.
[08:01:33:400] TX: STPX H:6C10F0, R:1, D:3C0A
[08:01:34:489] Timeout during receive.
[08:01:34:490] Sending 'test device present' notification.
[08:01:34:491] Setting timeout for Minimum, 0 ms.
[08:01:34:492] TX: STPTO 0
[08:01:34:504] OK
[08:01:34:505] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:34:520] Empty response to STPX with data. OK.
[08:01:34:522] Setting timeout for ReadProperty, 25 ms.
[08:01:34:523] TX: STPTO 25
[08:01:34:536] OK
[08:01:35:576] Timeout during receive.
[08:01:35:577] Sending 'test device present' notification.
[08:01:35:577] Setting timeout for Minimum, 0 ms.
[08:01:35:578] TX: STPTO 0
[08:01:35:593] OK
[08:01:35:593] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:35:609] Empty response to STPX with data. OK.
[08:01:35:609] Setting timeout for ReadProperty, 25 ms.
[08:01:35:609] TX: STPTO 25
[08:01:35:625] OK
[08:01:36:653] Timeout during receive.
[08:01:36:654] Sending 'test device present' notification.
[08:01:36:654] Setting timeout for Minimum, 0 ms.
[08:01:36:655] TX: STPTO 0
[08:01:36:666] OK
[08:01:36:668] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:36:681] Empty response to STPX with data. OK.
[08:01:36:684] Setting timeout for ReadProperty, 25 ms.
[08:01:36:686] TX: STPTO 25
[08:01:36:698] OK
[08:01:37:732] Timeout during receive.
[08:01:37:732] Sending 'test device present' notification.
[08:01:37:733] Setting timeout for Minimum, 0 ms.
[08:01:37:733] TX: STPTO 0
[08:01:37:738] OK
[08:01:37:739] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:37:754] Empty response to STPX with data. OK.
[08:01:37:755] Setting timeout for ReadProperty, 25 ms.
[08:01:37:755] TX: STPTO 25
[08:01:37:770] OK
[08:01:38:804] Timeout during receive.
[08:01:38:805] Receive timed out. Attempt #5, Timeout #5.
[08:01:38:806] Operating system request failed, checking for a live kernel...
[08:01:38:818] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:39:887] Timeout during receive.
[08:01:39:996] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:41:083] Timeout during receive.
[08:01:41:190] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:42:262] Timeout during receive.
[08:01:42:371] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:43:448] Timeout during receive.
[08:01:43:556] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:44:633] Timeout during receive.
[08:01:44:742] Checking for recovery mode...
[08:01:44:756] TX: STPX H:6C10F0, R:1, D:62
[08:01:45:836] Timeout during receive.
[08:01:45:836] TX: STPX H:6C10F0, R:1, D:62
[08:01:46:908] Timeout during receive.
[08:01:46:908] TX: STPX H:6C10F0, R:1, D:62
[08:01:47:981] Timeout during receive.
[08:01:47:983] TX: STPX H:6C10F0, R:1, D:62
[08:01:49:065] Timeout during receive.
[08:01:49:066] TX: STPX H:6C10F0, R:1, D:62
[08:01:50:140] Timeout during receive.
[08:01:50:141] TX: STPX H:6C10F0, R:1, D:62
[08:01:51:212] Timeout during receive.
[08:01:51:212] TX: STPX H:6C10F0, R:1, D:62
[08:01:52:292] Timeout during receive.
[08:01:52:294] TX: STPX H:6C10F0, R:1, D:62
[08:01:53:371] Timeout during receive.
[08:01:53:373] TX: STPX H:6C10F0, R:1, D:62
[08:01:54:448] Timeout during receive.
[08:01:54:448] TX: STPX H:6C10F0, R:1, D:62
[08:01:55:526] Timeout during receive.
[08:01:55:526] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:01:55:536] Unlock may not work, but we'll try...
[08:01:55:554] Suppressing VPW chatter.
[08:01:55:555] TX: STPX H:6CFEF0, R:1, D:2800
[08:01:55:590] Sending 'test device present' notification.
[08:01:55:591] Setting timeout for Minimum, 0 ms.
[08:01:55:592] TX: STPTO 0
[08:01:55:606] OK
[08:01:55:606] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:55:622] Empty response to STPX with data. OK.
[08:01:55:624] Setting timeout for ReadProperty, 25 ms.
[08:01:55:626] TX: STPTO 25
[08:01:55:638] OK
[08:01:56:679] Timeout during receive.
[08:01:56:803] Sending seed request.
[08:01:56:806] TX: STPX H:6C10F0, R:1, D:2701
[08:01:57:883] Timeout during receive.
[08:01:57:884] No response to seed request.
[08:01:57:884] Unlock was not successful.
[08:13:04:523] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new.bin
[08:13:04:551] Validating 1024k file.
[08:13:04:568] Start End Stored Needed Verdict Segment Name
[08:13:04:583] Checksum table is corrupt.
[08:13:04:595] This file is corrupt. It would render your PCM unusable.
[08:13:19:709] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new n1.bin
[08:13:19:734] Validating 1024k file.
[08:13:19:748] Start End Stored Needed Verdict Segment Name
[08:13:19:763] 00000 FFFFD 322D 322D Good Operating system
[08:13:19:779] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:13:19:799] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:13:19:813] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:13:19:835] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:13:19:855] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:13:19:872] 1F192 1FB4F DB8D DB8D Good System
[08:13:19:893] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:13:19:912] Requesting operating system ID...
[08:13:19:935] TX: STPX H:6C10F0, R:1, D:3C0A
[08:13:21:010] Timeout during receive.
[08:13:21:013] Sending 'test device present' notification.
[08:13:21:014] Setting timeout for Minimum, 0 ms.
[08:13:21:016] TX: STPTO 0
[08:13:21:021] OK
[08:13:21:023] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:21:037] Empty response to STPX with data. OK.
[08:13:21:040] Setting timeout for ReadProperty, 25 ms.
[08:13:21:042] TX: STPTO 25
[08:13:21:053] OK
[08:13:22:086] Timeout during receive.
[08:13:22:089] Sending 'test device present' notification.
[08:13:22:091] Setting timeout for Minimum, 0 ms.
[08:13:22:093] TX: STPTO 0
[08:13:22:110] OK
[08:13:22:113] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:22:126] Empty response to STPX with data. OK.
[08:13:22:129] Setting timeout for ReadProperty, 25 ms.
[08:13:22:130] TX: STPTO 25
[08:13:22:142] OK
[08:13:23:179] Timeout during receive.
[08:13:23:180] Sending 'test device present' notification.
[08:13:23:180] Setting timeout for Minimum, 0 ms.
[08:13:23:181] TX: STPTO 0
[08:13:23:198] OK
[08:13:23:199] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:23:214] Empty response to STPX with data. OK.
[08:13:23:215] Setting timeout for ReadProperty, 25 ms.
[08:13:23:216] TX: STPTO 25
[08:13:23:230] OK
[08:13:24:271] Timeout during receive.
[08:13:24:273] Sending 'test device present' notification.
[08:13:24:273] Setting timeout for Minimum, 0 ms.
[08:13:24:274] TX: STPTO 0
[08:13:24:287] OK
[08:13:24:288] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:24:303] Empty response to STPX with data. OK.
[08:13:24:304] Setting timeout for ReadProperty, 25 ms.
[08:13:24:304] TX: STPTO 25
[08:13:24:319] OK
[08:13:25:356] Timeout during receive.
[08:13:25:357] Receive timed out. Attempt #5, Timeout #5.
[08:13:25:357] TX: STPX H:6C10F0, R:1, D:3C0A
[08:13:26:447] Timeout during receive.
[08:13:26:449] Sending 'test device present' notification.
[08:13:26:450] Setting timeout for Minimum, 0 ms.
[08:13:26:452] TX: STPTO 0
[08:13:26:465] OK
[08:13:26:467] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:26:480] Empty response to STPX with data. OK.
[08:13:26:483] Setting timeout for ReadProperty, 25 ms.
[08:13:26:485] TX: STPTO 25
[08:13:26:496] OK
[08:13:27:523] Timeout during receive.
[08:13:27:523] Sending 'test device present' notification.
[08:13:27:524] Setting timeout for Minimum, 0 ms.
[08:13:27:524] TX: STPTO 0
[08:13:27:537] OK
[08:13:27:537] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:27:553] Empty response to STPX with data. OK.
[08:13:27:554] Setting timeout for ReadProperty, 25 ms.
[08:13:27:554] TX: STPTO 25
[08:13:27:569] OK
[08:13:28:597] Timeout during receive.
[08:13:28:599] Sending 'test device present' notification.
[08:13:28:601] Setting timeout for Minimum, 0 ms.
[08:13:28:603] TX: STPTO 0
[08:13:28:611] OK
[08:13:28:613] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:28:626] Empty response to STPX with data. OK.
[08:13:28:628] Setting timeout for ReadProperty, 25 ms.
[08:13:28:630] TX: STPTO 25
[08:13:28:642] OK
[08:13:29:675] Timeout during receive.
[08:13:29:677] Sending 'test device present' notification.
[08:13:29:679] Setting timeout for Minimum, 0 ms.
[08:13:29:681] TX: STPTO 0
[08:13:29:698] OK
[08:13:29:700] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:29:714] Empty response to STPX with data. OK.
[08:13:29:715] Setting timeout for ReadProperty, 25 ms.
[08:13:29:716] TX: STPTO 25
[08:13:29:731] OK
[08:13:30:770] Timeout during receive.
[08:13:30:773] Receive timed out. Attempt #5, Timeout #5.
[08:13:30:774] Operating system request failed, checking for a live kernel...
[08:13:30:812] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:31:890] Timeout during receive.
[08:13:31:998] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:33:074] Timeout during receive.
[08:13:33:182] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:34:255] Timeout during receive.
[08:13:34:364] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:35:440] Timeout during receive.
[08:13:35:550] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:36:627] Timeout during receive.
[08:13:36:752] Checking for recovery mode...
[08:13:36:773] TX: STPX H:6C10F0, R:1, D:62
[08:13:37:860] Timeout during receive.
[08:13:37:861] TX: STPX H:6C10F0, R:1, D:62
[08:13:38:948] Timeout during receive.
[08:13:38:950] TX: STPX H:6C10F0, R:1, D:62
[08:13:40:038] Timeout during receive.
[08:13:40:042] TX: STPX H:6C10F0, R:1, D:62
[08:13:41:119] Timeout during receive.
[08:13:41:121] TX: STPX H:6C10F0, R:1, D:62
[08:13:42:193] Timeout during receive.
[08:13:42:194] TX: STPX H:6C10F0, R:1, D:62
[08:13:43:268] Timeout during receive.
[08:13:43:268] TX: STPX H:6C10F0, R:1, D:62
[08:13:44:344] Timeout during receive.
[08:13:44:344] TX: STPX H:6C10F0, R:1, D:62
[08:13:45:433] Timeout during receive.
[08:13:45:433] TX: STPX H:6C10F0, R:1, D:62
[08:13:46:524] Timeout during receive.
[08:13:46:525] TX: STPX H:6C10F0, R:1, D:62
[08:13:47:598] Timeout during receive.
[08:13:47:598] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:13:47:625] Unlock may not work, but we'll try...
[08:13:47:648] Suppressing VPW chatter.
[08:13:47:649] TX: STPX H:6CFEF0, R:1, D:2800
[08:13:47:693] Sending 'test device present' notification.
[08:13:47:693] Setting timeout for Minimum, 0 ms.
[08:13:47:694] TX: STPTO 0
[08:13:47:709] OK
[08:13:47:710] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:47:725] Empty response to STPX with data. OK.
[08:13:47:725] Setting timeout for ReadProperty, 25 ms.
[08:13:47:726] TX: STPTO 25
[08:13:47:741] OK
[08:13:48:770] Timeout during receive.
[08:13:48:881] Sending seed request.
[08:13:48:885] TX: STPX H:6C10F0, R:1, D:2701
[08:13:49:953] Timeout during receive.
[08:13:49:954] No response to seed request.
[08:13:49:954] Unlock was not successful.
[08:17:26:128] You have made a wise choice. Try a full read first.
[08:28:35:945] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune with vats removed.bin
[08:28:35:969] Validating 1024k file.
[08:28:35:986] Start End Stored Needed Verdict Segment Name
[08:28:36:006] 00000 FFFFD 322D 4CF5 BAD Operating system
[08:28:36:022] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:28:36:038] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:28:36:056] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:28:36:072] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:28:36:088] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:28:36:109] 1F192 1FB4F DB8D DB8D Good System
[08:28:36:128] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:28:36:150] This file is corrupt. It would render your PCM unusable.
[08:28:45:571] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune oct6 1.bin
[08:28:45:607] Validating 1024k file.
[08:28:45:627] Start End Stored Needed Verdict Segment Name
[08:28:45:648] 00000 FFFFD 312E 312E Good Operating system
[08:28:45:670] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:28:45:691] 15E02 18F8F 2ACB 2ACB Good Engine diagnostics.
[08:28:45:716] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:28:45:735] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:28:45:758] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:28:45:780] 1F192 1FB4F DC8D DC8D Good System
[08:28:45:800] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:28:45:823] Requesting operating system ID...
[08:28:45:842] TX: STPX H:6C10F0, R:1, D:3C0A
[08:28:46:924] Timeout during receive.
[08:28:46:927] Sending 'test device present' notification.
[08:28:46:929] Setting timeout for Minimum, 0 ms.
[08:28:46:931] TX: STPTO 0
[08:28:46:941] OK
[08:28:46:944] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:46:956] Empty response to STPX with data. OK.
[08:28:46:958] Setting timeout for ReadProperty, 25 ms.
[08:28:46:959] TX: STPTO 25
[08:28:46:973] OK
[08:28:48:009] Timeout during receive.
[08:28:48:010] Sending 'test device present' notification.
[08:28:48:011] Setting timeout for Minimum, 0 ms.
[08:28:48:012] TX: STPTO 0
[08:28:48:029] OK
[08:28:48:030] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:48:045] Empty response to STPX with data. OK.
[08:28:48:047] Setting timeout for ReadProperty, 25 ms.
[08:28:48:048] TX: STPTO 25
[08:28:48:061] OK
[08:28:49:096] Timeout during receive.
[08:28:49:099] Sending 'test device present' notification.
[08:28:49:102] Setting timeout for Minimum, 0 ms.
[08:28:49:105] TX: STPTO 0
[08:28:49:118] OK
[08:28:49:119] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:49:134] Empty response to STPX with data. OK.
[08:28:49:134] Setting timeout for ReadProperty, 25 ms.
[08:28:49:136] TX: STPTO 25
[08:28:49:150] OK
[08:28:50:185] Timeout during receive.
[08:28:50:186] Sending 'test device present' notification.
[08:28:50:187] Setting timeout for Minimum, 0 ms.
[08:28:50:188] TX: STPTO 0
[08:28:50:206] OK
[08:28:50:207] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:50:222] Empty response to STPX with data. OK.
[08:28:50:223] Setting timeout for ReadProperty, 25 ms.
[08:28:50:224] TX: STPTO 25
[08:28:50:238] OK
[08:28:51:272] Timeout during receive.
[08:28:51:273] Receive timed out. Attempt #5, Timeout #5.
[08:28:51:274] TX: STPX H:6C10F0, R:1, D:3C0A
[08:28:52:342] Timeout during receive.
[08:28:52:345] Sending 'test device present' notification.
[08:28:52:347] Setting timeout for Minimum, 0 ms.
[08:28:52:349] TX: STPTO 0
[08:28:52:368] OK
[08:28:52:370] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:52:384] Empty response to STPX with data. OK.
[08:28:52:387] Setting timeout for ReadProperty, 25 ms.
[08:28:52:388] TX: STPTO 25
[08:28:52:400] OK
[08:28:53:430] Timeout during receive.
[08:28:53:432] Sending 'test device present' notification.
[08:28:53:433] Setting timeout for Minimum, 0 ms.
[08:28:53:435] TX: STPTO 0
[08:28:53:441] OK
[08:28:53:442] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:53:457] Empty response to STPX with data. OK.
[08:28:53:458] Setting timeout for ReadProperty, 25 ms.
[08:28:53:460] TX: STPTO 25
[08:28:53:473] OK
[08:28:54:505] Timeout during receive.
[08:28:54:506] Sending 'test device present' notification.
[08:28:54:507] Setting timeout for Minimum, 0 ms.
[08:28:54:508] TX: STPTO 0
[08:28:54:513] OK
[08:28:54:515] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:54:529] Empty response to STPX with data. OK.
[08:28:54:531] Setting timeout for ReadProperty, 25 ms.
[08:28:54:531] TX: STPTO 25
[08:28:54:546] OK
[08:28:55:577] Timeout during receive.
[08:28:55:578] Sending 'test device present' notification.
[08:28:55:578] Setting timeout for Minimum, 0 ms.
[08:28:55:578] TX: STPTO 0
[08:28:55:586] OK
[08:28:55:586] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:55:602] Empty response to STPX with data. OK.
[08:28:55:602] Setting timeout for ReadProperty, 25 ms.
[08:28:55:603] TX: STPTO 25
[08:28:55:618] OK
[08:28:56:651] Timeout during receive.
[08:28:56:652] Receive timed out. Attempt #5, Timeout #5.
[08:28:56:653] Operating system request failed, checking for a live kernel...
[08:28:56:683] TX: STPX H:6C10F0, R:1, D:3D00
[08:28:57:754] Timeout during receive.
[08:28:57:862] TX: STPX H:6C10F0, R:1, D:3D00
[08:28:58:936] Timeout during receive.
[08:28:59:046] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:00:120] Timeout during receive.
[08:29:00:228] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:01:316] Timeout during receive.
[08:29:01:425] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:02:498] Timeout during receive.
[08:29:02:607] Checking for recovery mode...
[08:29:02:660] TX: STPX H:6C10F0, R:1, D:62
[08:29:03:746] Timeout during receive.
[08:29:03:746] TX: STPX H:6C10F0, R:1, D:62
[08:29:04:822] Timeout during receive.
[08:29:04:822] TX: STPX H:6C10F0, R:1, D:62
[08:29:05:900] Timeout during receive.
[08:29:05:901] TX: STPX H:6C10F0, R:1, D:62
[08:29:06:973] Timeout during receive.
[08:29:06:973] TX: STPX H:6C10F0, R:1, D:62
[08:29:08:045] Timeout during receive.
[08:29:08:048] TX: STPX H:6C10F0, R:1, D:62
[08:29:09:121] Timeout during receive.
[08:29:09:122] TX: STPX H:6C10F0, R:1, D:62
[08:29:10:198] Timeout during receive.
[08:29:10:200] TX: STPX H:6C10F0, R:1, D:62
[08:29:11:288] Timeout during receive.
[08:29:11:290] TX: STPX H:6C10F0, R:1, D:62
[08:29:12:379] Timeout during receive.
[08:29:12:380] TX: STPX H:6C10F0, R:1, D:62
[08:29:13:456] Timeout during receive.
[08:29:13:463] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:29:13:509] Unlock may not work, but we'll try...
[08:29:13:530] Suppressing VPW chatter.
[08:29:13:531] TX: STPX H:6CFEF0, R:1, D:2800
[08:29:13:580] Sending 'test device present' notification.
[08:29:13:581] Setting timeout for Minimum, 0 ms.
[08:29:13:582] TX: STPTO 0
[08:29:13:597] OK
[08:29:13:597] TX: STPX H:8CFEF0, R:0, D:3F
[08:29:13:612] Empty response to STPX with data. OK.
[08:29:13:613] Setting timeout for ReadProperty, 25 ms.
[08:29:13:613] TX: STPTO 25
[08:29:13:629] OK
[08:29:14:655] Timeout during receive.
[08:29:14:765] Sending seed request.
[08:29:14:765] TX: STPX H:6C10F0, R:1, D:2701
[08:29:15:842] Timeout during receive.
[08:29:15:844] No response to seed request.
[08:29:15:846] Unlock was not successful.
[08:01:07:887] PCM Hammer 020
[08:01:07:892] ElmDevice initialization starting.
[08:01:07:915] TX:
[08:01:07:927] TX: AT Z
[08:01:08:794] ELM327 v1.4b
[08:01:08:797] TX: AT E0
[08:01:08:809] AT E0 OK
[08:01:08:813] TX: AT S0
[08:01:08:824] OK
[08:01:08:826] TX: AT RV
[08:01:08:840] Voltage: 12.5V
[08:01:08:846] TX: AT I
[08:01:08:856] Elm ID: ELM327 v1.4b
[08:01:08:862] Initializing PcmHacking.AllProDeviceImplementation
[08:01:08:863] TX: AT #1
[08:01:08:872] This is not an AllPro device.
[08:01:08:873] Determining whether PcmHacking.ScanToolDeviceImplementation is connected.
[08:01:08:875] TX: ST I
[08:01:08:889] ScanTool device ID: STN1130 v5.6.19
[08:01:08:895] TX: STPTO 3000
[08:01:08:903] OK
[08:01:08:904] TX: AT AL
[08:01:08:919] OK
[08:01:08:922] TX: AT SP2
[08:01:08:936] OK
[08:01:08:937] TX: AT DP
[08:01:08:953] SAE J1850 VPW
[08:01:08:955] TX: AT AR
[08:01:08:967] OK
[08:01:08:969] TX: AT AT0
[08:01:08:984] OK
[08:01:08:985] TX: AT SR F0
[08:01:09:000] OK
[08:01:09:002] TX: AT H1
[08:01:09:017] OK
[08:01:09:018] TX: AT ST 20
[08:01:09:032] OK
[08:01:27:736] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune with vats removed.bin
[08:01:27:777] Validating 1024k file.
[08:01:27:783] Start End Stored Needed Verdict Segment Name
[08:01:27:794] 00000 FFFFD 322D 322D Good Operating system
[08:01:27:800] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:01:27:806] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:01:27:812] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:01:27:821] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:01:27:830] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:01:27:839] 1F192 1FB4F DB8D DB8D Good System
[08:01:27:852] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:01:27:862] Requesting operating system ID...
[08:01:27:880] Setting timeout for ReadProperty, 25 ms.
[08:01:27:883] TX: STPTO 25
[08:01:27:892] OK
[08:01:27:905] TX: STPX H:6C10F0, R:1, D:3C0A
[08:01:29:039] Timeout during receive.
[08:01:29:054] Sending 'test device present' notification.
[08:01:29:057] Setting timeout for Minimum, 0 ms.
[08:01:29:059] TX: STPTO 0
[08:01:29:077] OK
[08:01:29:078] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:29:092] Empty response to STPX with data. OK.
[08:01:29:093] Setting timeout for ReadProperty, 25 ms.
[08:01:29:094] TX: STPTO 25
[08:01:29:108] OK
[08:01:30:143] Timeout during receive.
[08:01:30:143] Sending 'test device present' notification.
[08:01:30:144] Setting timeout for Minimum, 0 ms.
[08:01:30:145] TX: STPTO 0
[08:01:30:149] OK
[08:01:30:149] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:30:165] Empty response to STPX with data. OK.
[08:01:30:166] Setting timeout for ReadProperty, 25 ms.
[08:01:30:166] TX: STPTO 25
[08:01:30:182] OK
[08:01:31:217] Timeout during receive.
[08:01:31:219] Sending 'test device present' notification.
[08:01:31:221] Setting timeout for Minimum, 0 ms.
[08:01:31:224] TX: STPTO 0
[08:01:31:239] OK
[08:01:31:241] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:31:254] Empty response to STPX with data. OK.
[08:01:31:257] Setting timeout for ReadProperty, 25 ms.
[08:01:31:258] TX: STPTO 25
[08:01:31:270] OK
[08:01:32:310] Timeout during receive.
[08:01:32:312] Sending 'test device present' notification.
[08:01:32:313] Setting timeout for Minimum, 0 ms.
[08:01:32:314] TX: STPTO 0
[08:01:32:327] OK
[08:01:32:328] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:32:342] Empty response to STPX with data. OK.
[08:01:32:344] Setting timeout for ReadProperty, 25 ms.
[08:01:32:344] TX: STPTO 25
[08:01:32:359] OK
[08:01:33:398] Timeout during receive.
[08:01:33:399] Receive timed out. Attempt #5, Timeout #5.
[08:01:33:400] TX: STPX H:6C10F0, R:1, D:3C0A
[08:01:34:489] Timeout during receive.
[08:01:34:490] Sending 'test device present' notification.
[08:01:34:491] Setting timeout for Minimum, 0 ms.
[08:01:34:492] TX: STPTO 0
[08:01:34:504] OK
[08:01:34:505] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:34:520] Empty response to STPX with data. OK.
[08:01:34:522] Setting timeout for ReadProperty, 25 ms.
[08:01:34:523] TX: STPTO 25
[08:01:34:536] OK
[08:01:35:576] Timeout during receive.
[08:01:35:577] Sending 'test device present' notification.
[08:01:35:577] Setting timeout for Minimum, 0 ms.
[08:01:35:578] TX: STPTO 0
[08:01:35:593] OK
[08:01:35:593] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:35:609] Empty response to STPX with data. OK.
[08:01:35:609] Setting timeout for ReadProperty, 25 ms.
[08:01:35:609] TX: STPTO 25
[08:01:35:625] OK
[08:01:36:653] Timeout during receive.
[08:01:36:654] Sending 'test device present' notification.
[08:01:36:654] Setting timeout for Minimum, 0 ms.
[08:01:36:655] TX: STPTO 0
[08:01:36:666] OK
[08:01:36:668] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:36:681] Empty response to STPX with data. OK.
[08:01:36:684] Setting timeout for ReadProperty, 25 ms.
[08:01:36:686] TX: STPTO 25
[08:01:36:698] OK
[08:01:37:732] Timeout during receive.
[08:01:37:732] Sending 'test device present' notification.
[08:01:37:733] Setting timeout for Minimum, 0 ms.
[08:01:37:733] TX: STPTO 0
[08:01:37:738] OK
[08:01:37:739] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:37:754] Empty response to STPX with data. OK.
[08:01:37:755] Setting timeout for ReadProperty, 25 ms.
[08:01:37:755] TX: STPTO 25
[08:01:37:770] OK
[08:01:38:804] Timeout during receive.
[08:01:38:805] Receive timed out. Attempt #5, Timeout #5.
[08:01:38:806] Operating system request failed, checking for a live kernel...
[08:01:38:818] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:39:887] Timeout during receive.
[08:01:39:996] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:41:083] Timeout during receive.
[08:01:41:190] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:42:262] Timeout during receive.
[08:01:42:371] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:43:448] Timeout during receive.
[08:01:43:556] TX: STPX H:6C10F0, R:1, D:3D00
[08:01:44:633] Timeout during receive.
[08:01:44:742] Checking for recovery mode...
[08:01:44:756] TX: STPX H:6C10F0, R:1, D:62
[08:01:45:836] Timeout during receive.
[08:01:45:836] TX: STPX H:6C10F0, R:1, D:62
[08:01:46:908] Timeout during receive.
[08:01:46:908] TX: STPX H:6C10F0, R:1, D:62
[08:01:47:981] Timeout during receive.
[08:01:47:983] TX: STPX H:6C10F0, R:1, D:62
[08:01:49:065] Timeout during receive.
[08:01:49:066] TX: STPX H:6C10F0, R:1, D:62
[08:01:50:140] Timeout during receive.
[08:01:50:141] TX: STPX H:6C10F0, R:1, D:62
[08:01:51:212] Timeout during receive.
[08:01:51:212] TX: STPX H:6C10F0, R:1, D:62
[08:01:52:292] Timeout during receive.
[08:01:52:294] TX: STPX H:6C10F0, R:1, D:62
[08:01:53:371] Timeout during receive.
[08:01:53:373] TX: STPX H:6C10F0, R:1, D:62
[08:01:54:448] Timeout during receive.
[08:01:54:448] TX: STPX H:6C10F0, R:1, D:62
[08:01:55:526] Timeout during receive.
[08:01:55:526] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:01:55:536] Unlock may not work, but we'll try...
[08:01:55:554] Suppressing VPW chatter.
[08:01:55:555] TX: STPX H:6CFEF0, R:1, D:2800
[08:01:55:590] Sending 'test device present' notification.
[08:01:55:591] Setting timeout for Minimum, 0 ms.
[08:01:55:592] TX: STPTO 0
[08:01:55:606] OK
[08:01:55:606] TX: STPX H:8CFEF0, R:0, D:3F
[08:01:55:622] Empty response to STPX with data. OK.
[08:01:55:624] Setting timeout for ReadProperty, 25 ms.
[08:01:55:626] TX: STPTO 25
[08:01:55:638] OK
[08:01:56:679] Timeout during receive.
[08:01:56:803] Sending seed request.
[08:01:56:806] TX: STPX H:6C10F0, R:1, D:2701
[08:01:57:883] Timeout during receive.
[08:01:57:884] No response to seed request.
[08:01:57:884] Unlock was not successful.
[08:13:04:523] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new.bin
[08:13:04:551] Validating 1024k file.
[08:13:04:568] Start End Stored Needed Verdict Segment Name
[08:13:04:583] Checksum table is corrupt.
[08:13:04:595] This file is corrupt. It would render your PCM unusable.
[08:13:19:709] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new n1.bin
[08:13:19:734] Validating 1024k file.
[08:13:19:748] Start End Stored Needed Verdict Segment Name
[08:13:19:763] 00000 FFFFD 322D 322D Good Operating system
[08:13:19:779] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:13:19:799] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:13:19:813] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:13:19:835] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:13:19:855] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:13:19:872] 1F192 1FB4F DB8D DB8D Good System
[08:13:19:893] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:13:19:912] Requesting operating system ID...
[08:13:19:935] TX: STPX H:6C10F0, R:1, D:3C0A
[08:13:21:010] Timeout during receive.
[08:13:21:013] Sending 'test device present' notification.
[08:13:21:014] Setting timeout for Minimum, 0 ms.
[08:13:21:016] TX: STPTO 0
[08:13:21:021] OK
[08:13:21:023] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:21:037] Empty response to STPX with data. OK.
[08:13:21:040] Setting timeout for ReadProperty, 25 ms.
[08:13:21:042] TX: STPTO 25
[08:13:21:053] OK
[08:13:22:086] Timeout during receive.
[08:13:22:089] Sending 'test device present' notification.
[08:13:22:091] Setting timeout for Minimum, 0 ms.
[08:13:22:093] TX: STPTO 0
[08:13:22:110] OK
[08:13:22:113] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:22:126] Empty response to STPX with data. OK.
[08:13:22:129] Setting timeout for ReadProperty, 25 ms.
[08:13:22:130] TX: STPTO 25
[08:13:22:142] OK
[08:13:23:179] Timeout during receive.
[08:13:23:180] Sending 'test device present' notification.
[08:13:23:180] Setting timeout for Minimum, 0 ms.
[08:13:23:181] TX: STPTO 0
[08:13:23:198] OK
[08:13:23:199] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:23:214] Empty response to STPX with data. OK.
[08:13:23:215] Setting timeout for ReadProperty, 25 ms.
[08:13:23:216] TX: STPTO 25
[08:13:23:230] OK
[08:13:24:271] Timeout during receive.
[08:13:24:273] Sending 'test device present' notification.
[08:13:24:273] Setting timeout for Minimum, 0 ms.
[08:13:24:274] TX: STPTO 0
[08:13:24:287] OK
[08:13:24:288] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:24:303] Empty response to STPX with data. OK.
[08:13:24:304] Setting timeout for ReadProperty, 25 ms.
[08:13:24:304] TX: STPTO 25
[08:13:24:319] OK
[08:13:25:356] Timeout during receive.
[08:13:25:357] Receive timed out. Attempt #5, Timeout #5.
[08:13:25:357] TX: STPX H:6C10F0, R:1, D:3C0A
[08:13:26:447] Timeout during receive.
[08:13:26:449] Sending 'test device present' notification.
[08:13:26:450] Setting timeout for Minimum, 0 ms.
[08:13:26:452] TX: STPTO 0
[08:13:26:465] OK
[08:13:26:467] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:26:480] Empty response to STPX with data. OK.
[08:13:26:483] Setting timeout for ReadProperty, 25 ms.
[08:13:26:485] TX: STPTO 25
[08:13:26:496] OK
[08:13:27:523] Timeout during receive.
[08:13:27:523] Sending 'test device present' notification.
[08:13:27:524] Setting timeout for Minimum, 0 ms.
[08:13:27:524] TX: STPTO 0
[08:13:27:537] OK
[08:13:27:537] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:27:553] Empty response to STPX with data. OK.
[08:13:27:554] Setting timeout for ReadProperty, 25 ms.
[08:13:27:554] TX: STPTO 25
[08:13:27:569] OK
[08:13:28:597] Timeout during receive.
[08:13:28:599] Sending 'test device present' notification.
[08:13:28:601] Setting timeout for Minimum, 0 ms.
[08:13:28:603] TX: STPTO 0
[08:13:28:611] OK
[08:13:28:613] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:28:626] Empty response to STPX with data. OK.
[08:13:28:628] Setting timeout for ReadProperty, 25 ms.
[08:13:28:630] TX: STPTO 25
[08:13:28:642] OK
[08:13:29:675] Timeout during receive.
[08:13:29:677] Sending 'test device present' notification.
[08:13:29:679] Setting timeout for Minimum, 0 ms.
[08:13:29:681] TX: STPTO 0
[08:13:29:698] OK
[08:13:29:700] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:29:714] Empty response to STPX with data. OK.
[08:13:29:715] Setting timeout for ReadProperty, 25 ms.
[08:13:29:716] TX: STPTO 25
[08:13:29:731] OK
[08:13:30:770] Timeout during receive.
[08:13:30:773] Receive timed out. Attempt #5, Timeout #5.
[08:13:30:774] Operating system request failed, checking for a live kernel...
[08:13:30:812] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:31:890] Timeout during receive.
[08:13:31:998] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:33:074] Timeout during receive.
[08:13:33:182] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:34:255] Timeout during receive.
[08:13:34:364] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:35:440] Timeout during receive.
[08:13:35:550] TX: STPX H:6C10F0, R:1, D:3D00
[08:13:36:627] Timeout during receive.
[08:13:36:752] Checking for recovery mode...
[08:13:36:773] TX: STPX H:6C10F0, R:1, D:62
[08:13:37:860] Timeout during receive.
[08:13:37:861] TX: STPX H:6C10F0, R:1, D:62
[08:13:38:948] Timeout during receive.
[08:13:38:950] TX: STPX H:6C10F0, R:1, D:62
[08:13:40:038] Timeout during receive.
[08:13:40:042] TX: STPX H:6C10F0, R:1, D:62
[08:13:41:119] Timeout during receive.
[08:13:41:121] TX: STPX H:6C10F0, R:1, D:62
[08:13:42:193] Timeout during receive.
[08:13:42:194] TX: STPX H:6C10F0, R:1, D:62
[08:13:43:268] Timeout during receive.
[08:13:43:268] TX: STPX H:6C10F0, R:1, D:62
[08:13:44:344] Timeout during receive.
[08:13:44:344] TX: STPX H:6C10F0, R:1, D:62
[08:13:45:433] Timeout during receive.
[08:13:45:433] TX: STPX H:6C10F0, R:1, D:62
[08:13:46:524] Timeout during receive.
[08:13:46:525] TX: STPX H:6C10F0, R:1, D:62
[08:13:47:598] Timeout during receive.
[08:13:47:598] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:13:47:625] Unlock may not work, but we'll try...
[08:13:47:648] Suppressing VPW chatter.
[08:13:47:649] TX: STPX H:6CFEF0, R:1, D:2800
[08:13:47:693] Sending 'test device present' notification.
[08:13:47:693] Setting timeout for Minimum, 0 ms.
[08:13:47:694] TX: STPTO 0
[08:13:47:709] OK
[08:13:47:710] TX: STPX H:8CFEF0, R:0, D:3F
[08:13:47:725] Empty response to STPX with data. OK.
[08:13:47:725] Setting timeout for ReadProperty, 25 ms.
[08:13:47:726] TX: STPTO 25
[08:13:47:741] OK
[08:13:48:770] Timeout during receive.
[08:13:48:881] Sending seed request.
[08:13:48:885] TX: STPX H:6C10F0, R:1, D:2701
[08:13:49:953] Timeout during receive.
[08:13:49:954] No response to seed request.
[08:13:49:954] Unlock was not successful.
[08:17:26:128] You have made a wise choice. Try a full read first.
[08:28:35:945] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune with vats removed.bin
[08:28:35:969] Validating 1024k file.
[08:28:35:986] Start End Stored Needed Verdict Segment Name
[08:28:36:006] 00000 FFFFD 322D 4CF5 BAD Operating system
[08:28:36:022] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:28:36:038] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:28:36:056] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:28:36:072] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:28:36:088] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:28:36:109] 1F192 1FB4F DB8D DB8D Good System
[08:28:36:128] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:28:36:150] This file is corrupt. It would render your PCM unusable.
[08:28:45:571] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune oct6 1.bin
[08:28:45:607] Validating 1024k file.
[08:28:45:627] Start End Stored Needed Verdict Segment Name
[08:28:45:648] 00000 FFFFD 312E 312E Good Operating system
[08:28:45:670] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:28:45:691] 15E02 18F8F 2ACB 2ACB Good Engine diagnostics.
[08:28:45:716] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:28:45:735] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:28:45:758] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:28:45:780] 1F192 1FB4F DC8D DC8D Good System
[08:28:45:800] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:28:45:823] Requesting operating system ID...
[08:28:45:842] TX: STPX H:6C10F0, R:1, D:3C0A
[08:28:46:924] Timeout during receive.
[08:28:46:927] Sending 'test device present' notification.
[08:28:46:929] Setting timeout for Minimum, 0 ms.
[08:28:46:931] TX: STPTO 0
[08:28:46:941] OK
[08:28:46:944] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:46:956] Empty response to STPX with data. OK.
[08:28:46:958] Setting timeout for ReadProperty, 25 ms.
[08:28:46:959] TX: STPTO 25
[08:28:46:973] OK
[08:28:48:009] Timeout during receive.
[08:28:48:010] Sending 'test device present' notification.
[08:28:48:011] Setting timeout for Minimum, 0 ms.
[08:28:48:012] TX: STPTO 0
[08:28:48:029] OK
[08:28:48:030] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:48:045] Empty response to STPX with data. OK.
[08:28:48:047] Setting timeout for ReadProperty, 25 ms.
[08:28:48:048] TX: STPTO 25
[08:28:48:061] OK
[08:28:49:096] Timeout during receive.
[08:28:49:099] Sending 'test device present' notification.
[08:28:49:102] Setting timeout for Minimum, 0 ms.
[08:28:49:105] TX: STPTO 0
[08:28:49:118] OK
[08:28:49:119] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:49:134] Empty response to STPX with data. OK.
[08:28:49:134] Setting timeout for ReadProperty, 25 ms.
[08:28:49:136] TX: STPTO 25
[08:28:49:150] OK
[08:28:50:185] Timeout during receive.
[08:28:50:186] Sending 'test device present' notification.
[08:28:50:187] Setting timeout for Minimum, 0 ms.
[08:28:50:188] TX: STPTO 0
[08:28:50:206] OK
[08:28:50:207] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:50:222] Empty response to STPX with data. OK.
[08:28:50:223] Setting timeout for ReadProperty, 25 ms.
[08:28:50:224] TX: STPTO 25
[08:28:50:238] OK
[08:28:51:272] Timeout during receive.
[08:28:51:273] Receive timed out. Attempt #5, Timeout #5.
[08:28:51:274] TX: STPX H:6C10F0, R:1, D:3C0A
[08:28:52:342] Timeout during receive.
[08:28:52:345] Sending 'test device present' notification.
[08:28:52:347] Setting timeout for Minimum, 0 ms.
[08:28:52:349] TX: STPTO 0
[08:28:52:368] OK
[08:28:52:370] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:52:384] Empty response to STPX with data. OK.
[08:28:52:387] Setting timeout for ReadProperty, 25 ms.
[08:28:52:388] TX: STPTO 25
[08:28:52:400] OK
[08:28:53:430] Timeout during receive.
[08:28:53:432] Sending 'test device present' notification.
[08:28:53:433] Setting timeout for Minimum, 0 ms.
[08:28:53:435] TX: STPTO 0
[08:28:53:441] OK
[08:28:53:442] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:53:457] Empty response to STPX with data. OK.
[08:28:53:458] Setting timeout for ReadProperty, 25 ms.
[08:28:53:460] TX: STPTO 25
[08:28:53:473] OK
[08:28:54:505] Timeout during receive.
[08:28:54:506] Sending 'test device present' notification.
[08:28:54:507] Setting timeout for Minimum, 0 ms.
[08:28:54:508] TX: STPTO 0
[08:28:54:513] OK
[08:28:54:515] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:54:529] Empty response to STPX with data. OK.
[08:28:54:531] Setting timeout for ReadProperty, 25 ms.
[08:28:54:531] TX: STPTO 25
[08:28:54:546] OK
[08:28:55:577] Timeout during receive.
[08:28:55:578] Sending 'test device present' notification.
[08:28:55:578] Setting timeout for Minimum, 0 ms.
[08:28:55:578] TX: STPTO 0
[08:28:55:586] OK
[08:28:55:586] TX: STPX H:8CFEF0, R:0, D:3F
[08:28:55:602] Empty response to STPX with data. OK.
[08:28:55:602] Setting timeout for ReadProperty, 25 ms.
[08:28:55:603] TX: STPTO 25
[08:28:55:618] OK
[08:28:56:651] Timeout during receive.
[08:28:56:652] Receive timed out. Attempt #5, Timeout #5.
[08:28:56:653] Operating system request failed, checking for a live kernel...
[08:28:56:683] TX: STPX H:6C10F0, R:1, D:3D00
[08:28:57:754] Timeout during receive.
[08:28:57:862] TX: STPX H:6C10F0, R:1, D:3D00
[08:28:58:936] Timeout during receive.
[08:28:59:046] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:00:120] Timeout during receive.
[08:29:00:228] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:01:316] Timeout during receive.
[08:29:01:425] TX: STPX H:6C10F0, R:1, D:3D00
[08:29:02:498] Timeout during receive.
[08:29:02:607] Checking for recovery mode...
[08:29:02:660] TX: STPX H:6C10F0, R:1, D:62
[08:29:03:746] Timeout during receive.
[08:29:03:746] TX: STPX H:6C10F0, R:1, D:62
[08:29:04:822] Timeout during receive.
[08:29:04:822] TX: STPX H:6C10F0, R:1, D:62
[08:29:05:900] Timeout during receive.
[08:29:05:901] TX: STPX H:6C10F0, R:1, D:62
[08:29:06:973] Timeout during receive.
[08:29:06:973] TX: STPX H:6C10F0, R:1, D:62
[08:29:08:045] Timeout during receive.
[08:29:08:048] TX: STPX H:6C10F0, R:1, D:62
[08:29:09:121] Timeout during receive.
[08:29:09:122] TX: STPX H:6C10F0, R:1, D:62
[08:29:10:198] Timeout during receive.
[08:29:10:200] TX: STPX H:6C10F0, R:1, D:62
[08:29:11:288] Timeout during receive.
[08:29:11:290] TX: STPX H:6C10F0, R:1, D:62
[08:29:12:379] Timeout during receive.
[08:29:12:380] TX: STPX H:6C10F0, R:1, D:62
[08:29:13:456] Timeout during receive.
[08:29:13:463] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:29:13:509] Unlock may not work, but we'll try...
[08:29:13:530] Suppressing VPW chatter.
[08:29:13:531] TX: STPX H:6CFEF0, R:1, D:2800
[08:29:13:580] Sending 'test device present' notification.
[08:29:13:581] Setting timeout for Minimum, 0 ms.
[08:29:13:582] TX: STPTO 0
[08:29:13:597] OK
[08:29:13:597] TX: STPX H:8CFEF0, R:0, D:3F
[08:29:13:612] Empty response to STPX with data. OK.
[08:29:13:613] Setting timeout for ReadProperty, 25 ms.
[08:29:13:613] TX: STPTO 25
[08:29:13:629] OK
[08:29:14:655] Timeout during receive.
[08:29:14:765] Sending seed request.
[08:29:14:765] TX: STPX H:6C10F0, R:1, D:2701
[08:29:15:842] Timeout during receive.
[08:29:15:844] No response to seed request.
[08:29:15:846] Unlock was not successful.
- antus
- Site Admin
- Posts: 8258
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help with pcm hammer
nothing coming back from the pcm. check your wiring and power.
note that the no vats file that you have is corrupt, the operating system is bad. do not use that file.
note that the no vats file that you have is corrupt, the operating system is bad. do not use that file.
Code: Select all
[08:28:35:945] C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\nicks chevy base tune with vats removed.bin
[08:28:35:969] Validating 1024k file.
[08:28:35:986] Start End Stored Needed Verdict Segment Name
[08:28:36:006] 00000 FFFFD 322D 4CF5 BAD Operating system <--------------------------
[08:28:36:022] 08002 15DFF 1A90 1A90 Good Engine calibration
[08:28:36:038] 15E02 18F8F 28CB 28CB Good Engine diagnostics.
[08:28:36:056] 18F92 1D26F 9E9B 9E9B Good Transmission calibration
[08:28:36:072] 1D272 1DBCF 40FE 40FE Good Transmission diagnostics
[08:28:36:088] 1DBD2 1F18F D7BE D7BE Good Fuel system
[08:28:36:109] 1F192 1FB4F DB8D DB8D Good System
[08:28:36:128] 1FB52 1FD7F 2192 2192 Good Speedometer
[08:28:36:150] This file is corrupt. It would render your PCM unusable. <--------------------------
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 12
- Joined: Thu Sep 28, 2023 12:25 pm
- cars: 2003 Chevy silverado
Re: help with pcm hammer
thank you for the help man this shits hard to learn...is it my bin or the xdf or both?
- antus
- Site Admin
- Posts: 8258
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help with pcm hammer
guessing here on my part but I am thinking vats is not a setting in this operating system, meaning the operating system is patched to remove it instead (thus operating system segment gets the change, not the calibration segment). For technical reasons tunerpro cant update the OS checksum without a plugin. I suspect you have the xdf, not the plugin. You can either figure out which plugin you need and install that to tuner pro, then it'll save ok. or you can use universal patcher which will do the checksum as it comes.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: help with pcm hammer
This Os is 12579405, is the Intel only Os and is only from 2003, it's an Os most disregard in favor of 12587603 which is a newer more optioned Os.
I would recommend doing the same, upgrading to 12587603, especially if you are just getting started tuning it.
It's just not well supported!
Also, I would use a newer version of PCMHammer, like 21.2 that you can get here: PCM Hammer Release 021.
-Enjoy
I would recommend doing the same, upgrading to 12587603, especially if you are just getting started tuning it.
It's just not well supported!
Also, I would use a newer version of PCMHammer, like 21.2 that you can get here: PCM Hammer Release 021.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 12
- Joined: Thu Sep 28, 2023 12:25 pm
- cars: 2003 Chevy silverado
Re: help with pcm hammer
thanks guys i have the new version of pcm hammer now and would like to change os like u suggested but not sure how to do it..also now i cant even read my pcm i get this when i try
[09:26:44:286] PCM Hammer 021
[09:26:44:286] Monday, October 16 2023 @09:26:44:28
[09:26:45:224] Voltage: 12.5V
[09:26:45:255] Elm ID: ELM327 v1.4b
[09:26:45:287] ScanTool device ID: STN1130 v5.6.19
[09:27:00:859] Will save to C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new n1.bin
[09:27:03:520] Querying operating system of current PCM.
[09:27:14:410] Operating system query failed, will retry: Error
[09:27:25:243] Operating system query failed: Error
[09:27:25:243] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm.
[09:32:47:503] Using OsID: 12579405
[09:32:49:822] Unlock was not successful.
did i brick my pcm
[09:26:44:286] PCM Hammer 021
[09:26:44:286] Monday, October 16 2023 @09:26:44:28
[09:26:45:224] Voltage: 12.5V
[09:26:45:255] Elm ID: ELM327 v1.4b
[09:26:45:287] ScanTool device ID: STN1130 v5.6.19
[09:27:00:859] Will save to C:\Users\nickd\OneDrive\Documents\TunerPro Files\Bins\PcmHammer021\chevy pcm new n1.bin
[09:27:03:520] Querying operating system of current PCM.
[09:27:14:410] Operating system query failed, will retry: Error
[09:27:25:243] Operating system query failed: Error
[09:27:25:243] Unable to get operating system ID. Will assume this can be unlocked with the default seed/key algorithm.
[09:32:47:503] Using OsID: 12579405
[09:32:49:822] Unlock was not successful.
did i brick my pcm
-
- Posts: 12
- Joined: Thu Sep 28, 2023 12:25 pm
- cars: 2003 Chevy silverado
Re: help with pcm hammer
do you no where i can get this os that will work for me 12587603
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: help with pcm hammer
Try looking here:
https://github.com/Snoman002/Engine-Tun ... ing_System
You SHOULD be able to find something to use.
Mike
https://github.com/Snoman002/Engine-Tun ... ing_System
You SHOULD be able to find something to use.
Mike