Memcal ID Tool with Data Version 1.10
- antus
- Site Admin
- Posts: 8258
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Memcal ID Tool with Data Version 1.06
what ecu is it? I see a delco branding on that chip, but the older rodeos with the 4ze1 are a hitachi ecu yet they still talk aldl (though I saw that on the circuit diagram, and have not tried it). not sure exactly what the relations are there.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Memcal ID Tool with Data Version 1.07
Been a while but have updated Memcal id tool, updated some bin detection information.
I have also separated the tool from the bin/xdf data as the data folder xdf's are now most likely to be updated more than id tool.
So i have updated the bins/xdf's to current versions available.
I have also separated the tool from the bin/xdf data as the data folder xdf's are now most likely to be updated more than id tool.
So i have updated the bins/xdf's to current versions available.
-
- Posts: 149
- Joined: Wed Oct 31, 2012 6:59 pm
- cars: VY commodore supercharged V6
- Location: Sydney
Re: Memcal ID Tool with Data Version 1.07
Was just trying to check a PCM and it keeps coming up as not found the service number is 09356445 can someone try and run it and see if they get a different result??
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Memcal ID Tool with Data Version 1.07
you might need to post the bin for anyone to check it?
-
- Posts: 149
- Joined: Wed Oct 31, 2012 6:59 pm
- cars: VY commodore supercharged V6
- Location: Sydney
Re: Memcal ID Tool with Data Version 1.07
Just got it in the mail today ill have to get put it in the car and get a read, don't have a test bench.
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Memcal ID Tool with Data Version 1.07
445 is just the generic service no. for vx-vy flash pcm so it depends on the 4 digit code, but can still be any type flashed to it if it's been played with!
Re: Memcal ID Tool with Data Version 1.08
Updated memcal id tool to 1.08, added the following bins to the data pack. Also added and update the generic xdf's.
AXFX0842
BHNW5710
CNPH3172
AXFX0842
BHNW5710
CNPH3172
Re: Memcal ID Tool with Data Version 1.08
Thanks mate,I find this tool quite handy and use it often. I have a noticed a few bins getting around that weren't on this program. If i find anyomre I'll let you know.
Re: Memcal ID Tool with Data Version 1.08
that was the original intent, one place, all the info and bins/xdf's, send them over if you get any and ill keep adding them.
Re: Memcal ID Tool with Data Version 1.08
Thanks
Makes it so easy
Makes it so easy