Datsun 240z with L20ET
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
A picture paints a thousand words so... this is the completed engine bay with everything ready to go:
Ecu was just sitting there, with naw_7s wideband hooked up waiting for startup before cable tidy.. with a tune that would hopefully be ballpark:
Then we cranked, and it started. and ran poorly with lots and lots of smoke pissing everywhere
The culprit was this device here, with oil leaking probably in the inlet side before the engine... and on to the ground underneath. Turbo was meant to be working but turns out it was DOA. Game over.
We hit the track anyway, I got in a few laps in my sr20 gemini which was awesome fun before the brake booster failed, but both projects live on and this one will be getting a reco turbo upgrade next.
Ecu was just sitting there, with naw_7s wideband hooked up waiting for startup before cable tidy.. with a tune that would hopefully be ballpark:
Then we cranked, and it started. and ran poorly with lots and lots of smoke pissing everywhere
The culprit was this device here, with oil leaking probably in the inlet side before the engine... and on to the ground underneath. Turbo was meant to be working but turns out it was DOA. Game over.
We hit the track anyway, I got in a few laps in my sr20 gemini which was awesome fun before the brake booster failed, but both projects live on and this one will be getting a reco turbo upgrade next.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Datsun 240z with L20ET
slap a cheapo ebay jobby on it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Datsun 240z with L20ET
Massive effort to get as far as you guys did in the time frame, cant wait to see it out on the track soon. You wanted to upgrade the turbo
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Datsun 240z with L20ET
did you get the slicks on the gem in the end ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
Yeah, I did. It made a huge difference! I'll update that cars thread tomorrow. Have some in-car footage @1080p resolution that turned out great too.
Ross has a larger reco turbo with t3 flange sitting on the shelf, so thats now earmarked for this car.
Ross has a larger reco turbo with t3 flange sitting on the shelf, so thats now earmarked for this car.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: Datsun 240z with L20ET
Amazing amount of work in a short time, looks good.
Delcowizzid didn't send you is old camera by any chance? These photos are about on par with his before he got his new camera.
yoda69
Delcowizzid didn't send you is old camera by any chance? These photos are about on par with his before he got his new camera.
yoda69
Re: Datsun 240z with L20ET
so how did it go with the delco? was it improved over the stock computer, or had that engine never been used by you guys with the stock computer?
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
yoda: haha mine are in focus at least I resized em down so they fit on smaller res screens and still show what i was intending without chewing too much bandwidth. I can send you large ones, they are 5mp in focus originally on my phone.
neRok: It idled but had too much oil pooring in from the turbo. It was missing, but it did rev when we gave it stick. The turbo let the whole system down big time though. We never bothered with the stock computer, just delcod it from the beginning, and the engine + turbo was bought it on good faith it was a runner, but as always you never know. We have a reconditioned larger T3 turbo on the shelf, so that'll be going on, but have to stop working on the cars every possible night and all weekend now haha. Back to our regular schedule.
neRok: It idled but had too much oil pooring in from the turbo. It was missing, but it did rev when we gave it stick. The turbo let the whole system down big time though. We never bothered with the stock computer, just delcod it from the beginning, and the engine + turbo was bought it on good faith it was a runner, but as always you never know. We have a reconditioned larger T3 turbo on the shelf, so that'll be going on, but have to stop working on the cars every possible night and all weekend now haha. Back to our regular schedule.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Datsun 240z with L20ET
yeah alteast you have alot more time before the next track day to make sure you are both well prepped!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Datsun 240z with L20ET
I just received word that the replacement turbo was bolted on last night and the manifolds etc re-attached. Its exhaustless, but it started, idled and ran with no smoke. Things are looking up! Will get an exhaust on it, maybe the speed sensor and do some initial tuning on wednesday.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396