bellett.net
https://delcohacking.net/forums/

5 speed into a Bellett - gearshift
https://delcohacking.net/forums/viewtopic.php?f=34&t=3016		 Page 1 of 1
Author:  Glenn [ Tue Apr 07, 2015 8:05 am ]
Post subject:  5 speed into a Bellett - gearshift
Hi all. Considering fitting a 5 speed from a 117 DOHC into a Bellett, but without the remote shifter.

Can anybody tell me:
1. if the remote shifter is removed, will a sedan gear stick fit into the 5 speed box (and work) I think it might need a spacer only ?
2. will there be any tunnel clearance issues fitting the 5 speed without remote shifter
3. how far back is the centre of the gearshift 'hole' in a 5 speed and how far back on a Bellett 4 speed? (from front face of the 'box)
ie will stick come out of tunnel in same place?

Anybody got either box in the shed and can measure for me please?
Author:  PR91 [ Wed Apr 08, 2015 5:08 am ]
Post subject:  Re: 5 speed into a Bellett - gearshift
Call me Glenn.
Have done this all before with the box in my Wasp.
But think "Gemini parts".
Author:  Glenn [ Wed Apr 08, 2015 5:17 am ]
Post subject:  Re: 5 speed into a Bellett - gearshift
PR91 wrote:
Call me Glenn.
Have done this all before with the box in my Wasp.
But think "Gemini parts".

OK, will talk at comm meet briefly
Author:  PR91 [ Wed Apr 08, 2015 5:21 am ]
Post subject:  Re: 5 speed into a Bellett - gearshift
I can give u the bits u need.
Have plenty of spares here.
Author:  Glenn [ Wed Apr 08, 2015 5:34 am ]
Post subject:  Re: 5 speed into a Bellett - gearshift
PR91 wrote:
I can give u the bits u need.
Have plenty of spares here.

Thanks Brett.... will talk ! [ is Wasp floor pan same as Bellett ? I expect so]
Author:  PR91 [ Wed Apr 08, 2015 6:19 am ]
Post subject:  Re: 5 speed into a Bellett - gearshift
Near enuf. Wasp tunnel is removable.
Gearstick hole is in exactly the same place.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/