| bellett.net https://delcohacking.net/forums/ |
|
| Sway Bars https://delcohacking.net/forums/viewtopic.php?f=35&t=3059 |
Page 1 of 1 |
| Author: | Asroc66 [ Fri Jun 12, 2015 5:56 am ] |
| Post subject: | Sway Bars |
Hi Guys Can someone tell me if the sway bar off a PR91 is interchangeable with that of a PR20 4-door I am led to believe the GT is thicker? Do they use the same mounting points and hardware/hangers Are the bars the same size at each end Many thanks J |
|
| Author: | Farmer [ Fri Jun 12, 2015 11:37 am ] |
| Post subject: | Re: Sway Bars |
Always seem to read these techy questions at night, so dont just slip out for a look, but I'm pretty sure the GT bar is thicker, but hung the same way. Just larger diameter holes in the rubbers. Cheers, Matt. |
|
| Author: | CQGT [ Fri Jun 12, 2015 1:37 pm ] |
| Post subject: | Re: Sway Bars |
Hi J. Outer bushes and brackets same part numbers. Inner bracket same but bush different. GT has a larger diameter in the bar except for the ends. Dave. |
|
| Author: | Asroc66 [ Fri Jun 12, 2015 10:43 pm ] |
| Post subject: | Re: Sway Bars |
Many thanks That was what I wanted to hear Cheers J |
|
| Author: | PR91 [ Sun Jul 05, 2015 2:04 pm ] |
| Post subject: | Re: Sway Bars |
Sedan bar is 19mm. GT is 21mm. In all honesty, the bar is not the problem on a Bellett front end..... It's how it's mounted. They're useless. Have a look under the front of my race car and you'd see how to fix it properly. |
|
| Author: | Glenn [ Mon Mar 25, 2019 6:22 am ] |
| Post subject: | Re: Sway Bars |
PR91 wrote: Sedan bar is 19mm. GT is 21mm. In all honesty, the bar is not the problem on a Bellett front end..... It's how it's mounted. They're useless. Have a look under the front of my race car and you'd see how to fix it properly. Old thread but i just checked the diameter of my front sway bar on the Sport. Using vernier calipers its around 20.4mm (close to 21) diameter. I wonder if in fact that's the same as a GT? I am assuming it would be as the rest of the Sport uses all GT stuff. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|