View unanswered posts | View active topics It is currently Fri Nov 22, 2024 8:46 am



Reply to topic  [ 8 posts ] 
G200w twin cam POWER! 
Author Message
User avatar

Joined: Tue Oct 21, 2008 7:12 am
Posts: 194
Location: Brisbane
Car(s): 1968 Bellett GT
Reply with quote
ok so...im chasing the max power i can possible get out of a g200w and be somewhat reliable..idont want turbo or a supercharger just a bombed out NA engine. Has anyone got like a race g200w engine and know how much power its making or know the most i could get out of one of these engines?


Tue Sep 04, 2012 3:19 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2823
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
no idea really, but I would imagine you would need a cam shaft change to get more power (at higher revs)

_________________
'72 PR60 Sport


Tue Sep 04, 2012 6:22 am
Profile WWW
User avatar

Joined: Tue Oct 21, 2008 7:12 am
Posts: 194
Location: Brisbane
Car(s): 1968 Bellett GT
Reply with quote
yeah custom cams is no probs or pistons or anything really...just need to know what they can flow and how much they can handle


Tue Sep 04, 2012 7:16 am
Profile
User avatar

Joined: Tue Oct 21, 2008 7:12 am
Posts: 194
Location: Brisbane
Car(s): 1968 Bellett GT
Reply with quote
just trying to figure out if its worth spending thousands on my g200w or just put a 13b or a s2000 engine in it. i want power and love to keep manufacturers engine not some other brand but if the g200w's are slow as then i wont waste my money!


Wed Sep 05, 2012 5:06 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2823
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
Only you can know what to spend !

Personally, I would keep the G200w in it. It should have good low down torque, compared to the other 2 engines and in everyday driving, that's what counts.

If you plan on racing, then thats another story. How fast do you want to go $$$$$$$$$

_________________
'72 PR60 Sport


Wed Sep 05, 2012 5:29 am
Profile WWW

Joined: Fri Mar 20, 2009 8:23 am
Posts: 1816
Reply with quote
I would have made that decision before painting engine bay.


Wed Sep 05, 2012 5:49 am
Profile
User avatar

Joined: Tue Oct 21, 2008 7:12 am
Posts: 194
Location: Brisbane
Car(s): 1968 Bellett GT
Reply with quote
nah doesnt matter about the engine bay this engine bay has been modded to fit anything...i think i could fit a small block v8 in it if i wanted to but im not. Itll be used for some race times..doesnt have to be to streetable ive owned very unstreetable cars before and it doesnt bother me..just when i put the foot down i want it to go fast and sound awesome! i will probably keep the g200w as i have and efi setup for it with handmade jap extractors, new full rebuild kit, and a pair of roller barrel throttle bodies for it...so i have basically most of the parts i need for it...but the only thing steering me away is how reliable these are as parts are hard to get...and how well do the headgaskets hold up and in between cylinders looks very small and prone to blowing! and also that it will make less than 140hp at the wheels.


Wed Sep 05, 2012 7:03 am
Profile

Joined: Sun Jun 24, 2012 10:49 pm
Posts: 25
Car(s): 1978 TD Gemini - 1976 TX Gemini
Reply with quote
140hp @ rear wheels should be do-able on an unmodified head. As a guide, my previous G200w made 112rwhp, the only mods were a VN throttle body, an old haltech and a crap set of 4-2-1's.


Thu Nov 22, 2012 12:22 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.