| bellett.net https://delcohacking.net/forums/ |
|
| dizzy cap https://delcohacking.net/forums/viewtopic.php?f=36&t=2368 |
Page 1 of 1 |
| Author: | BULLITT [ Sat May 25, 2013 10:17 am ] |
| Post subject: | dizzy cap |
car back from auto electrician running a bit rough checked the dizzy cap corrode also the leads going into the cap all green corrosion wonder it ran ..so I am to get a gh506 dizzy cap ...correct ?? the leads will I have to make up a set or can you buy at repco /supercheap ?? any other model that suit would appreciate your help .im a muso cheers davo should I just do the pulsar n12 conversion ?? and do away with some failing bits ?? |
|
| Author: | PR95 [ Sat May 25, 2013 11:48 am ] |
| Post subject: | Re: dizzy cap |
Davo you can measure the leads or take with you to Repco or Supercheap, the sell them as single lead. don't forget the coil lead as well. Geoff |
|
| Author: | CQGT [ Sat May 25, 2013 12:20 pm ] |
| Post subject: | Re: dizzy cap |
While your at it. Check your rotor for corrosion on the tip. Have a look at the points and see if there any 'tits' on the face. If there is. Clean them up with a points file as a tempory measure and replace them with a new condensor as well. There's a earth wire on the points base that looks like twisted horsehair in a fibreglass sheath. Check the terminal ends for any fractures in the wire. Your auto electrician may be able to make you 1 or try your local Nissan dealer for a early N12 pulsar. If not successfull, pm or ring me and I'll try to get you 1. Good to know you've got your car back. Dave. |
|
| Author: | CQGT [ Sat May 25, 2013 12:25 pm ] |
| Post subject: | Re: dizzy cap |
Forgot to tell you. Supercheap will have a listing on the parts. I think GH506 is now GH520. But. Check their books under early Chev. LUV if none on Bellett. Dave. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|