bellett.net :: View topic - G180 W mls Head Gaskets

bellett.net https://delcohacking.net/forums/

G180 W mls Head Gaskets https://delcohacking.net/forums/viewtopic.php?f=36&t=3005	Page 1 of 1

Author:	flying [ Sun Mar 22, 2015 10:56 am ]
Post subject:	G180 W mls Head Gaskets
Hi Guys I am ordering an MLS Head Gasket from Thomas 4 Parts He can get them made up takes 1 month $265 plus postage The only other Gasket set kit I could and have got is from MDS Gaskets in Melbourne but this is for the G200 W and the only difference is the Graphite Head Gasket to suit the 87 mm Bore. Anyone interested in ordering a MLS Gasket ??? Minimum order is 2 Thomas 4 parts website: http://thomas4parts.com/ Regards Flying

Author:

Glenn [ Sun Mar 22, 2015 10:08 pm ]

Post subject:

Re: G180 W mls Head Gaskets

flying wrote:

Hi Guys

I am ordering an MLS Head Gasket from Thomas 4 Parts

He can get them made up takes 1 month $265 plus postage

The only other Gasket set kit I could and have got is from MDS Gaskets in Melbourne but this is for the G200 W and the only difference is the Graphite Head Gasket to suit the 87 mm Bore.

Anyone interested in ordering a MLS Gasket ???

Minimum order is 2

Thomas 4 parts website:

http://thomas4parts.com/

Regards
Flying

Not sure if i am right here.... i think the Bellett 1800SOHC gasket can be used on the DOHC engine? Chev Luv are often available on ebay if you only need head gasket. This one does not have the section around the cam chain area, but it supplied as a separate gasket i think.

Attachments:

G180_SOHC_head_gasket_ 001.jpg [ 110.55 KiB | Viewed 14567 times ]

G180_SOHC_head_gasket_ 002.jpg [ 103.45 KiB | Viewed 14567 times ]

Author:

flying [ Mon Mar 23, 2015 10:16 pm ]

Post subject:

Re: G180 W mls Head Gaskets

Hi Glenn

That Gasket looks different

Heres a picture of mine compared to a copy of yours -- shold have put some white paper underneath for better contrast

Quick Question -- are the sohc Heads only 8 bolts?

Regards Flying

Attachments:

004.JPG [ 159.44 KiB | Viewed 14533 times ]

Author:

Glenn [ Mon Mar 23, 2015 11:04 pm ]

Post subject:

Re: G180 W mls Head Gaskets

there seem to be some differences in hole size mainly ? Although, two extra holes also

The LUV seems to have an 'odd' shape (not circle) around the bores, yours does not.

I have another LUV SOHC gasket here also which has the 'extension' for the timing chain area.

Afraid I don't know how many bolt holes are used.

Attachments:

G180_SOHC_head_gasket_.jpg [ 37.46 KiB | Viewed 14529 times ]

Author:	Asroc66 [ Mon Mar 23, 2015 11:35 pm ]
Post subject:	Re: G180 W mls Head Gaskets
They Should be interchangeable Readily available from USA but very high postage Cheers J

Author:	Glenn [ Mon Mar 23, 2015 11:49 pm ]
Post subject:	Re: G180 W mls Head Gaskets
Asroc66 wrote: They Should be interchangeable Readily available from USA but very high postage Cheers J yes they are, the one without the 'extension' has a separate gasket supplied. Post is expensive sometimes but one one of them i got lucky and paid < $20

Author:	flying [ Tue Mar 24, 2015 9:49 am ]
Post subject:	Re: G180 W mls Head Gaskets
The SOHC Gaskets look close but no banana

Author:

flying [ Tue Mar 24, 2015 9:58 am ]

Post subject:

Re: G180 W mls Head Gaskets

Heres some pictures

Two of the Early Blue Top Twin Cam

and two of a Green Top

Glenns SOHC almost fits the Green Top except for an extra hole required top left but does not fit the blue top which is very similar to the red top G200 W

Green top head is different again with extra water on the Intake side of the head

Regards Flying

Attachments:

Green Top Intake.jpg [ 160.72 KiB | Viewed 14503 times ]

Blue Top Intake Resized.jpg [ 149.36 KiB | Viewed 14503 times ]

Green Top Resized.jpg [ 134.23 KiB | Viewed 14503 times ]

Blue Top Head resized.jpg [ 140.53 KiB | Viewed 14503 times ]

Author:	Asroc66 [ Tue Mar 24, 2015 8:54 pm ]
Post subject:	Re: G180 W mls Head Gaskets
Hi Thanks for the heads-up Another Myth Busted Cheers J

Page 1 of 1	All times are UTC
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/