Author |
Message |
BULLITT
Joined: Mon Jan 10, 2011 1:03 pm Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
|
hi guys did some trawling ..hope this works ..I have a supplier in china says they have the gwis-13 a gmb pumps how many do I want ...that's a good question this is the photo they sent me anyone can get it out of a book I think I get one sent out check it out hey at the worse says its $100 so be it if we can pull it off great who is in for one I can tell them we buy one inspect then buy more what say yee ?? I took this shot off my computer via a camera that's why its blurry
Attachments:
DSCF3004.JPG [ 177.6 KiB | Viewed 30845 times ]
|
Mon Apr 13, 2015 4:40 am |
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am Posts: 2823 Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
BULLITT wrote: hi guys did some trawling ..hope this works ..I have a supplier in china says they have the gwis-13 a gmb pumps how many do I want ...that's a good question this is the photo they sent me anyone can get it out of a book I think I get one sent out check it out hey at the worse says its $100 so be it if we can pull it off great who is in for one I can tell them we buy one inspect then buy more what say yee ?? I took this shot off my computer via a camera that's why its blurry sounds great Dave.... Probably US$ i think. how will they send it ? Freight might be expensive. Most of these places require payment in advance usually by Telegraphic Transfer. Your Bank can do it.... eg Comm bank charges $22... there's a catch though as the intermediate Banks will also take a cut so the receipient will receive less money and get upset! If only one Bank is in on the act, then typical charge is around another US$35 You will need to factor all this in. Perhaps also keep the total under $1000 to avoid Customs getting in on the act also ! Customs fees, taxes, GST etc...... My best guess is keep the number under 7-8 pieces.? glenn
_________________ '72 PR60 Sport
|
Mon Apr 13, 2015 5:56 am |
|
|
Anthiron
Joined: Wed Mar 05, 2014 6:21 am Posts: 57 Location: Sunshine Coast QLD
Car(s): 74 Chev Luv, 60 VW Baja Bug, 72 MK1 Escort, 70 MK2 Cortina, 04 Harley Sportster Custom, 79 Yamaha RX125 Tracker,
|
I'm in for one.
|
Mon Apr 13, 2015 6:22 am |
|
|
BULLITT
Joined: Mon Jan 10, 2011 1:03 pm Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
|
got an answer few minutes ago one pump $104 us ...with postage equals $137 aus ...not bad reckon with more it will be less I have 2 other people giving me a quote so I guess I will wait a few days postage was expensive the pump was $33 us dollars well hopefully we are on to them stay tuned ...anyone after one let me know by the way they will send just one cheers davo
|
Mon Apr 13, 2015 10:51 am |
|
|
Anthiron
Joined: Wed Mar 05, 2014 6:21 am Posts: 57 Location: Sunshine Coast QLD
Car(s): 74 Chev Luv, 60 VW Baja Bug, 72 MK1 Escort, 70 MK2 Cortina, 04 Harley Sportster Custom, 79 Yamaha RX125 Tracker,
|
Are these old stock or are they still Making them?
|
Mon Apr 13, 2015 10:53 am |
|
|
BULLITT
Joined: Mon Jan 10, 2011 1:03 pm Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
|
hi mate I havnt asked that question I guess that even if they are old stock they wouldn't deteriote as what they are made of I paid 4 years ago $90 kiwi dollars getting the last one out of nz ..that was with postage ..I will see what else comes in tomorrow I have 3 irons in the fire they all claim to have them we shall see .. cheers davo
|
Mon Apr 13, 2015 10:59 am |
|
|
Gunna
|
If your going through Alibaba be very careful. 90% of it is fraud. Get a Chinese friend to call first. No guarentee but helps.
|
Mon Apr 13, 2015 11:28 am |
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am Posts: 2544
|
Family member uses Ali and swears by it. Never had a prob.
And good on ya Davo for chasing these pumps mate. Will help a number of people. I'm ok for them tho.
|
Tue Apr 14, 2015 1:23 am |
|
|
Gunna
|
PR91 wrote: Family member uses Ali and swears by it. Never had a prob.
And good on ya Davo for chasing these pumps mate. Will help a number of people. I'm ok for them tho. Thanks for the feedback Brett. And I do agree with you, well done Davo!!!
|
Tue Apr 14, 2015 2:15 am |
|
|
BULLITT
Joined: Mon Jan 10, 2011 1:03 pm Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
|
last price $147 u.s. for 2 plus bank charge approx. $30 u.s . total $177 u.s. which in aus dollars is $232 or approx. $116 each ...waiting for a better offer yet .....
|
Tue Apr 14, 2015 2:56 am |
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am Posts: 2544
|
Cheap if u ask me mate. Got onto it lads before u miss out!
|
Tue Apr 14, 2015 4:05 am |
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am Posts: 2823 Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
BULLITT wrote: last price $147 u.s. for 2 plus bank charge approx. $30 u.s . total $177 u.s. which in aus dollars is $232 or approx. $116 each ...waiting for a better offer yet ..... probably a bit more, Dave, as you won't get the TV news exchange rate. More like 2-3 cent less.
_________________ '72 PR60 Sport
|
Tue Apr 14, 2015 5:35 am |
|
|
Anthiron
Joined: Wed Mar 05, 2014 6:21 am Posts: 57 Location: Sunshine Coast QLD
Car(s): 74 Chev Luv, 60 VW Baja Bug, 72 MK1 Escort, 70 MK2 Cortina, 04 Harley Sportster Custom, 79 Yamaha RX125 Tracker,
|
Seems like fair pricing if it is all legitimate.
I was interested more in whether they are being manufactured rather than whether the pumps are old. I agree, there shouldn't really be any deterioration over time. I tried Alibaba but no one would sell me a handful, all wanted minimum orders of 500 or so.
Even asked for a sample, provided an ABN and explained I may buy several but was knocked back. It looks like you were luckier.
Nick
|
Tue Apr 14, 2015 7:35 am |
|
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm Posts: 211 Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
The one on the right came from Portugal ....
Attachments:
DSCN6462.JPG [ 1.93 MiB | Viewed 30700 times ]
DSCN6454.JPG [ 2.02 MiB | Viewed 30700 times ]
|
Tue Apr 21, 2015 11:12 pm |
|
|
67GT
Joined: Sun Jun 14, 2009 8:44 am Posts: 348 Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
|
Hi Guys, I must have missed this thread when it came up. What was the outcome on these pumps ?
Also I have found on e-bay some water pump rebuid kits. They are Asahi brand, with a part number R-221. According to the picture they are for G150 and G161 engines, with PR20, PA20 and PR91 all specifically listed.
|
Tue Oct 27, 2015 4:53 am |
|
|
sdoubleb
Joined: Fri Jul 10, 2015 10:04 am Posts: 85 Location: Kanmantoo South Australia
Car(s): 67 bellett
|
I'd also be very interested if they are available
|
Tue Oct 27, 2015 11:02 am |
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am Posts: 428 Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
_________________
To increase the fun, add a hair dryer
|
Thu Nov 26, 2015 3:34 am |
|
|