Cheers Dave,
I shall grab a wire brush from work today and see how I go
| bellett.net https://delcohacking.net/forums/ |
|
| compliance plate or chassis number location https://delcohacking.net/forums/viewtopic.php?f=39&t=2691 |
Page 1 of 1 |
| Author: | robot__ [ Wed Apr 16, 2014 10:56 am ] |
| Post subject: | compliance plate or chassis number location |
Hi All, Anyone know if the Wasps had a compliance plate or where I may find a chassis number on my Wasp? |
|
| Author: | dave [ Wed Apr 16, 2014 11:48 am ] |
| Post subject: | Re: compliance plate or chassis number location |
Heya Robot, The Wasp has a chassis number stamped on the chassis crossmember located approximately under where the passenger would sit. I had to attack mine with a wire brush for several minutes to get mine to show up, and mine actually isn't that bad underneath! They also have a little build plate in the engine bay on the side; can't remember if it's on the driver's or passenger side! They don't really have much useful info printed there; just the engine and chassis # from memory, as for build date, who knows?!?! The Wasps were all imported in 1965 I've been told, so it's probably a 1965! FYI there were only 122 of them sold here, so they're a rare beast! Welcome to the forum! Cheers, Dave |
|
| Author: | robot__ [ Wed Apr 16, 2014 10:46 pm ] |
| Post subject: | Re: compliance plate or chassis number location |
Cheers Dave, I shall grab a wire brush from work today and see how I go
|
|
| Author: | PR91 [ Fri Apr 18, 2014 7:27 am ] |
| Post subject: | Re: compliance plate or chassis number location |
Reply in your thread in the 'my bellett' section as well. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|