| bellett.net https://delcohacking.net/forums/ |
|
| My Bellett https://delcohacking.net/forums/viewtopic.php?f=44&t=1380 |
Page 1 of 2 |
| Author: | flying [ Thu Feb 24, 2011 3:32 am ] | ||
| Post subject: | My Bellett | ||
My first post on this site . Just want to say hello My name is George and here is a picture of my Bellett which I currently have and hope to drive in Bay Birdwood This picture is a few years old I have had this car since 1978
|
|||
| Author: | dave [ Thu Feb 24, 2011 4:04 am ] |
| Post subject: | Re: My Bellett |
G'day George; welcome to the forum! |
|
| Author: | RobSA [ Thu Feb 24, 2011 11:11 am ] |
| Post subject: | Re: My Bellett |
Another Adelaidian to add to the growing Bellett tribe. Welcome aboard George. Don't forget to come and say hello at Glenelg. Cheers Rob |
|
| Author: | GTtoo [ Thu Feb 24, 2011 9:00 pm ] |
| Post subject: | Re: My Bellett |
Howdy George, and welcome Where has that top little GT been hiding ?? Great to have you as part of the clan. Yes, do come to All Jap Day if you can make it. p.s. Gunmetal GT with red interior sooooo reminds me of my first one (which went to Bellett heaven)...... Cheers,B. |
|
| Author: | redback [ Thu Feb 24, 2011 9:19 pm ] |
| Post subject: | Re: My Bellett |
Gday George, Nice GT. Are you working on it at the moment? |
|
| Author: | rod [ Fri Feb 25, 2011 1:40 am ] |
| Post subject: | Re: My Bellett |
good to cee another bellett and specially a gt   , there must a few more about that never made it to the scrap heap good to cee them
|
|
| Author: | BULLITT [ Fri Feb 25, 2011 2:15 am ] |
| Post subject: | Re: My Bellett |
yet another comes out of the woodwork and it looks like a beauty ....has it been dee- badged? or was it as it came ? love to see some interior shots kind regards davo |
|
| Author: | 2ldohc [ Fri Feb 25, 2011 5:30 am ] |
| Post subject: | Re: My Bellett |
Welcome to Bellett.net! We hope you enjoy the view, not sure on the crazy residents though  As Rob said, come on down to Glenelg on Sunday and meet the Bellett folk of Adelaide  R. |
|
| Author: | oz_toffa [ Fri Feb 25, 2011 11:21 am ] |
| Post subject: | Re: My Bellett |
Welcome to the forum, George. Hope you enjoy all the info and the carry on you will see here! Real nice looking GT you have there. Bring it for a drive down to Wrigley Reserve on sunday and meet up with all the other Isuzu Nutters. Cheers OZ |
|
| Author: | mrflibbles [ Fri Feb 25, 2011 11:46 am ] |
| Post subject: | Re: My Bellett |
nice gt mate, great to see one i havent seen before in adelaide too, keen too see it in the flesh! welcome to the madness! |
|
| Author: | Farmer [ Mon Feb 28, 2011 12:58 pm ] |
| Post subject: | Re: My Bellett |
You look to have plenty of new friends, George! Thanks for joining & showing & please show more. Fantastic when another car appears 'out of the blue' like this! I've met many of the above people at the 2009 nationals & can vouch for them being top blokes - friendly & helpfull. Welcome, Matt. |
|
| Author: | yellowperil [ Tue Mar 01, 2011 10:14 am ] |
| Post subject: | Re: My Bellett |
Welcome George Good to see another member. |
|
| Author: | flying [ Mon Apr 18, 2011 11:58 pm ] | |||||||
| Post subject: | Re: My Bellett | |||||||
Sorry for the delay in replying Yes I am working on it when time permits I did debadge this car in 1978 for a cleaner look, put on a 66 rear number plate trim with no name, even removed the badge from the grill. Quick history on the car: Bought in 1978 from a guy who i think was the service manager at Dick Martin Motors his kids were driving it to Flinders Uni at the time. He told me it was Dick Martins wifes car. The car was originally sold 21-6-67 to Charles P at Fullam according to the service book. When i got it was in the original olive colour with the fog lights, wing mirrors hub caps, plastic still on the door cards -- original. Car was in need of a respray ans as I didnt like the olive I painted it Prism Silver from a Honda Civic. gt mirrors and hub cap were swapped to my 68 sedan and then sold. That was a great car with a lot of hot up parts from a guy at Seaford who raced a bellet --Wayne Sutton? The GT ten got an engine upgrade with a visit to Chris Milton wild cam, head port, side draught 45 weber on an adapted 1500 Lynx manifold. went like a rocket but the economy went from 42 mpg on the open road to 25 --oh well Ran that set up for years until the enginge went bang. rolled it into the shed and there it sits. The next phase is a g180 zzr but I haven't got my head around the Fuel injection possibly hunting a computer Hay need help from fourum. As I said earlier - hope to get this up and running by Bay to Birdwood time Regards
|
||||||||
| Author: | gt orphanage [ Tue Apr 19, 2011 2:59 am ] |
| Post subject: | Re: My Bellett |
g180zzr engine i assume this is a g180w twin cam ? |
|
| Author: | Leadfoot_Liz [ Tue Apr 19, 2011 10:48 am ] |
| Post subject: | Re: My Bellett |
welcome to the family good luck with the rebuild and restoration i know what time restrictions are like......  maybe a quick visit to Coona to put some faces to names is possible ?? Liz |
|
| Author: | flying [ Thu Apr 21, 2011 7:34 am ] | ||||
| Post subject: | Re: My Bellett | ||||
Yes its a g180 w My dilema is : do I go with a carby setup from an old 117 find the remainder of the wiring loom and ecu (pf60?) or do i try to fit this other set up that may be from a gemini -- it comes with the wiring loom and ecu that says Nikki diesel. Is this a Diesel injection unit? I'll include the 3 photos I also have the 5 sp gbox remote shift is this a straight swap for the orig or do i have to change the gbox mount and prop shaft length?
|
|||||
| Author: | 1968GT [ Thu Apr 21, 2011 7:42 am ] |
| Post subject: | Re: My Bellett |
KEEP IT ORIGINAL!! |
|
| Author: | mrflibbles [ Thu Apr 21, 2011 8:04 am ] |
| Post subject: | Re: My Bellett |
i like the twin carbies myself, but injection is nice to! |
|
| Author: | gt orphanage [ Thu Apr 21, 2011 8:29 am ] |
| Post subject: | Re: My Bellett |
you will need 1x n13 pulsar running multi point 1x vl commo fuel pump 1x eb falcon fuel rail 1 x g series dizzy 1x rb gemini dizzy |
|
| Author: | gt orphanage [ Thu Apr 21, 2011 9:12 am ] |
| Post subject: | Re: My Bellett |
1 st thinG to do is remove the dizzY from the twin cam as you need the drive gear and the length of the twin cam shaft,now strip the g series dizzy and cut the shaft to the same length lock the centrifical and vacume advance as the ecu will now take care of these. You will need to shim the gear as the shaft is thinner than the gear. Next thing is to fit the guts of the rb minus the module,cut both wires to the module add extra length to the and have them external to the dizzy. [rb module no longer needed]. Now remove the pulsar dizzy take off the cap there will be 2 6mm screws retaining the module with 2 external plugs and 1 internal plug with 2 wires 1 yellow 1 green cut these two wires and remove the module, you need to solder thes wire as the gemini pick up will control the pulsar module. [ this module can be mounted where you want we end up putting Geoffs on the inner guard as when we were in coona we were frying them on a plate i had it on off the engine] this needs to have heat sink between the module and the bare metal. We now have isuzu talking to a nissan ecu from here on we are mostly nissan. The next thing is the injectors 1 is high and the other is low impendence so remove the isuzu injectors take off the o rings and remove the retainer plates,now remove the o rings from the pulsar and fit the plates and refit the o rings. Now the fuel rail will not fit get the eb fuel rail the distance between the injectors are the same so cut the rail to pick up on the 2 middle injectors now cut both ends off to match the outer injectors and braize it together i ran a return line back before the fuel pump, which is a vl commodore mounted near the tank. Geoffs car has a couple on fittings to take the return line and go to a larger pick up. We are not running a swirl pot or serge tank and maintaining 38 psi fuel pressure. to be continued |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|