| bellett.net https://delcohacking.net/forums/ |
|
| Air Con https://delcohacking.net/forums/viewtopic.php?f=6&t=3744 |
Page 1 of 1 |
| Author: | Glenn [ Thu Sep 30, 2021 5:09 am ] |
| Post subject: | Air Con |
Wanted, 2 row crank pulley to suit a G180 SOHC engine. I'm toying with the idea of fitting air con to my Sport. I know it's been done before as an option perhaps so the pulleys must exist. Maybe someone has a SOHC engine kicking around with the 2 row pulley? Glenn |
|
| Author: | toomanybelletts [ Thu Sep 30, 2021 8:30 am ] |
| Post subject: | Re: Air Con |
Ii have one thar may do . Let me know by fone . |
|
| Author: | Glenn [ Sun Jan 09, 2022 7:20 am ] |
| Post subject: | Re: Air Con |
toomanybelletts wrote: Ii have one thar may do . Let me know by fone . Many thanks Craig. |
|
| Author: | Farmer [ Mon Jan 10, 2022 10:51 am ] |
| Post subject: | Re: Air Con |
Hello Glenn, I checked the Sport motor, it only has a single row pulley, so I hope Craig has one for you. Cheers, Matt. |
|
| Author: | Glenn [ Mon Jan 10, 2022 11:21 pm ] |
| Post subject: | Re: Air Con |
Farmer wrote: Hello Glenn, I checked the Sport motor, it only has a single row pulley, so I hope Craig has one for you. Cheers, Matt. Craig has an old motor and the pulley was just right, 2 rows. |
|
| Author: | Farmer [ Fri Jan 14, 2022 10:44 am ] |
| Post subject: | Re: Air Con |
Excellent! |
|
| Author: | Glenn [ Sat Jan 15, 2022 3:19 am ] |
| Post subject: | Re: Air Con |
Farmer wrote: Excellent! I'm still working out how to do it all...... by s/h bits from a wreckers to adapt to the Bellett of buy one of the 'universal' kits that cost about $1500 |
|
| Author: | Farmer [ Wed Jan 19, 2022 10:24 am ] |
| Post subject: | Re: Air Con |
At least universal is new. Older units would need retrofitting and seals. It's a universal one in Gary's blue sedan, and it works great. Cheers, Matt. |
|
| Author: | Glenn [ Thu Jan 20, 2022 2:25 am ] |
| Post subject: | Re: Air Con |
Farmer wrote: At least universal is new. Older units would need retrofitting and seals. It's a universal one in Gary's blue sedan, and it works great. Cheers, Matt. Good point there Matt. Long time since i saw A/C in a Bellett and only in pictures. I assume under the glovebox. The kits i have looked at on line are usually a pretty tight fit in a Bellett by their measurements. |
|
| Author: | toomanybelletts [ Mon Jan 24, 2022 3:57 am ] |
| Post subject: | Re: Air Con |
Hello Glenn , I'm glad it fitted . |
|
| Author: | Farmer [ Mon Jan 24, 2022 9:56 pm ] |
| Post subject: | Re: Air Con |
Glenn, in Gary's it's fitted in place of the original heater facia, so as not to take up knee room. But in the sport with its proper heater console, you probably wouldn't want to do that. I wonder if it could be mounted on top of the transmission tunnel? I'm not sure how George set up the heater though. I was there last week, but was more interested in going for a run than examining the details. But that would be fun too! I could ask Gary to take some photos. Cheers, Matt. |
|
| Author: | Glenn [ Tue Jan 25, 2022 1:34 am ] |
| Post subject: | Re: Air Con |
Farmer wrote: Glenn, in Gary's it's fitted in place of the original heater facia, so as not to take up knee room. But in the sport with its proper heater console, you probably wouldn't want to do that. I wonder if it could be mounted on top of the transmission tunnel? I'm not sure how George set up the heater though. I was there last week, but was more interested in going for a run than examining the details. But that would be fun too! I could ask Gary to take some photos. Cheers, Matt. Hi Matt, I looked at the space behind the Sport heater controls, and just no space. You can get these kits as heater/cooler though which would mean removing the existing heater and maybe it would fit in there but that would be a last resort. From what I can see these kits only recirculate the air. Not ideal. They 'might' fit in the parcel shelf area but really would have to have one to try before ideally. Here's a link to kits https://autoaer.com.au/collections/air-conditioning-kits ANOTHER LINK https://www.tcrcarponents.com.au/car-air-conditioning-heating-early-ford-chev/ |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|