bellett.net
https://delcohacking.net/forums/

1967/68 Bellett sedan For Sale
https://delcohacking.net/forums/viewtopic.php?f=8&t=3341		 Page 1 of 3
Author:  1968GT [ Wed Sep 21, 2016 5:05 am ]
Post subject:  1967/68 Bellett sedan For Sale
The owner contacted me as he would like the car saved, however the car resides in WA! :(

The owner has had the car from almost new, photos attached, mobile number 0478 833048. The owner knows of the cost to transport the car to the East and will take that into consideration for anyone who is interested! Who knows, it could be a freebee IF you pay all transport costs? ;)
Would be great if another can be saved as the current owner wishes.
The motor was rebuilt at just under 100,000 miles and has done 12,000 miles since the reconditioning. :)

Attachments:
WA 6.JPG
WA 6.JPG [ 3.11 MiB | Viewed 36332 times ]
WA 7.JPG
WA 7.JPG [ 2.71 MiB | Viewed 36332 times ]
WA 5.JPG
WA 5.JPG [ 2.98 MiB | Viewed 36332 times ]
WA 4.JPG
WA 4.JPG [ 3.03 MiB | Viewed 36332 times ]
WA 3.JPG
WA 3.JPG [ 2.85 MiB | Viewed 36331 times ]
WA 2.JPG
WA 2.JPG [ 2.94 MiB | Viewed 36332 times ]
WA 1.JPG
WA 1.JPG [ 2.93 MiB | Viewed 36332 times ]
Author:  BULLITT [ Wed Sep 21, 2016 7:28 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
shame the distance ...should be some belletters over there its I think pr20 4080888 year ??
Author:  pa_man [ Wed Sep 21, 2016 7:46 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
I enlarged the photo and reckon the number is 4050888 which is 65.5, 4080888 would be 67.
Also i reckon that its a 3 bearing main engine, Low starter motor, alloy rocker cover but no breather or bolts which is consistent with late 65.

Sexy in Black !!

Josh
Author:  Asroc66 [ Wed Sep 21, 2016 8:23 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
agreed
Hey not wanting to pick faults
are my eyes crossed or is that fan a bit wonkie?
Well it is a long drive across the Nullarbor
J
Author:  Teditor [ Wed Sep 21, 2016 8:47 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Can anyone advise how much it would cost to bring from WA to QLD, just a rough idea, I am interested, but there are limits.

Ted
Author:  Asroc66 [ Wed Sep 21, 2016 8:50 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Well I had Asroc transported from Perth WA to Melbourne by enclosed train over 6 years ago
I think it was about $1400....
Quite reasonable I thought as they picked it up transported from depot too.....
If you want to use truck then ensure they dont place it over the cab.....
Enclosed is really the only way to go
J
Author:  pa_man [ Wed Sep 21, 2016 8:59 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Classic J
from the drivers side looks like the tips are bent
from the pasengers side looks ok
:lol: optical allusion

Josh
Author:  1968GT [ Wed Sep 21, 2016 9:20 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
The owner said it has a 5 bearing motor, however he has a spare 3 bearing motor plus other parts to go with the deal.
The body is definitely late 1966 on, OR major body work has been done but not according to the owner, a senior chap.
I think the chassis number looks like a 408 number to me!
Author:  pa_man [ Wed Sep 21, 2016 10:31 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
No matter what.....its black!!
With the right set of wheels would make a stunning sedan B-)
Author:  GTtoo [ Wed Sep 21, 2016 1:00 pm ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Agreed PA..MAN. A bit sun burnt, but a happy goer :D :D . Worth the pick up fee.

The emaculately restored Roman Red is still for sale around the corner from my place. They have put it back out on the footpath for sale, and copping the weather , such a shame. Would throw all of $4,700 at it. Drive away, no more to pay (if i was in my retirement fund). I drive past it every day and hope it doesn't get vandalised on the street. I think it's up on another thread, please save it someone !!

B.
Author:  Farmer [ Wed Sep 21, 2016 1:38 pm ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Yeah, fan looks pretty wonky, but I've got plenty of fans! What I don't have (any more) is a factory black sedan!
Hmmm......
8-) Matt.
Author:  PR91 [ Thu Sep 22, 2016 7:00 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
As Josh said...... Wheels make all the difference on a black sedan.
Oh, and bright work ala a deluxe..... ;)
Author:  Gunna [ Thu Sep 22, 2016 7:50 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Hi all you watchers.

I just spoke to Hue about his lovely little bellett.

However we need to sort out its over heating problem first.

Over 70 K/hr it begins to over heat (it's never been in the red). Has a new water pump, new radiator, no thermostat, overflow bottle, been flushed and been doing this for a while.

Could it be a bad temp sensor?

Any ideas would be appreciated.
Author:  Stickman [ Thu Sep 22, 2016 8:16 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
That makes for 3 black Bellett sedans now.
There is also a black PR90 GT in WA too (not factory black though + it's running a Celica motor but it is a PR90 so who cares)
Author:  Stickman [ Thu Sep 22, 2016 8:21 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Gunna wrote:
Hi all you watchers.

I just spoke to Hue about his lovely little bellett and if I wasn't jumping on anyone's toes, I was going to fly over in Christmas time and drive it back over to Queensland.

However we need to sort out its over heating problem first.

Over 70 K/hr it begins to over heat (it's never been in the red). Has a new water pump, new radiator, no thermostat, overflow bottle, been flushed and been doing this for a while.

Could it be a bad temp sensor?

Any ideas would be appreciated.


If there is "NO" thermostat in there then that could likely be the issue as it the water will be passing through the radiator too quickly and can't be cooled enough. Or if there is a new thermostat maybe the temperature rating is too high. Needs the 60 deg one to make the gauge sit right in the belletts.
Author:  Asroc66 [ Thu Sep 22, 2016 8:32 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
I'm with Sticky on this one
71'c thermostat
Tridon TT1 -160
Stant ST1-160
(160' fahrenheit)
J
Author:  Farmer [ Fri Sep 23, 2016 1:29 pm ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
Gunna wrote:
Hi all you watchers.

I just spoke to Hue about his lovely little bellett.

However we need to sort out its over heating problem first.

Over 70 K/hr it begins to over heat (it's never been in the red). Has a new water pump, new radiator, no thermostat, overflow bottle, been flushed and been doing this for a while.

Could it be a bad temp sensor?

Any ideas would be appreciated.

Aunty Mary had the same problem. She had corrosion gunge blocking some passages in the head, and it didn't flush because the flush stuff couldn't pass through. Her head is alloy though.
Also, she had a lot of gunge in the block. While the head was off, I put rags in the bores and flushed the block with running water and compressed air into the block drain port on the left side of the block. So much stuff came out of the passages. More thorough to pull the motor out and invert it, but this was good enough.
Try the temp sender first just in case. And I would run the tt1-160 thermostat.

Cheers, Matt.
Author:  Redzone [ Tue Sep 27, 2016 12:35 pm ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
My god I want this thing so hard!
Author:  Feral_Kev [ Wed Oct 05, 2016 4:14 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
this looks so much like the one that my dad painted with pressure packs, rite down to the red interior.

if it was it would be great to get it back.
Author:  degruch [ Wed Oct 05, 2016 11:04 am ]
Post subject:  Re: 1967/68 Bellett sedan For Sale
pa_man wrote:
No matter what.....its black!!
With the right set of wheels would make a stunning sedan B-)


I believe it's actually illegal to have a classic car in black without white walls.
Page 1 of 3 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/