|
Author |
Message |
Glenn
Joined: Tue May 10, 2011 2:23 am Posts: 2823 Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
degruch wrote: Hi guys,
Confirmation today, sadly, OHC water pumps do not share any components with, nor can they be modified to suit the OHV pump. The bearing and shaft is larger than the OHV, so no chance of interchanging either, as with the seal. The bearing and shaft are too large in diameter to machine the OHV housing to fit.
Thanks to Oz for donating an OHC pump to the cause, but sadly, if we want a ready supply of OHV pumps we'll need to source them specifically. I can produce CAD to suit, of course, maybe we can modify to fit a readily available bearing and seal? is it possible to make an adapter plate? A thick piece of aluminium, machined to bolt to the block with C/sunk Unbrakos, then drilled to take the 'other' water pump? Of course the pump will be moved further forward doing this so an electric fan might be needed.
_________________ '72 PR60 Sport
|
Fri Nov 07, 2014 3:51 am |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
THE WATER PUMP SAGA...........NT edition. I have ordered 5 water pumps from 5 different online suppliers with "in stock" for Protex WP1001G, GMB GWIS-13a all to no avail....... "Sorry MR Ingram - our guys went to pick your pump off the shelf and there was not one there....." REFUND GIVEN - or "We don't have the Protex available but we can give you a GMB version" - a few days later................"Sorry Neil blah blah blah......." REFUND GIVEN I have been searching and searching for a few months for this part. I have even emailed GMB International Japan - I ordered 10 and requested a price - so I can onsell at cost to you guys........." NIL STOCK - we will contact when back in stock - PFFFFFT SO SIXth TIME LUCKY?? AMAZON AMERICA - 1 in stock THEN IT WAS SHIPPED THE NEXT DAY!!!!!!!!!!!!!! I will let you know when it arrives so I can confirm it fits my G150 and then contact the seller for more!!!!! You be the judge if it will fit from the photos - I am confident!!
|
Wed Jan 21, 2015 6:02 am |
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am Posts: 2823 Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
redback wrote: THE WATER PUMP SAGA...........NT edition. I will let you know when it arrives so I can confirm it fits my G150 and then contact the seller for more!!!!! You be the judge if it will fit from the photos - I am confident!! good luck. looks the goods from what i can tell How much all up ? Some USA companies charge stupid freight costs
_________________ '72 PR60 Sport
|
Wed Jan 21, 2015 6:12 am |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
Hey Glenn,
Australian $109.38 including freight - after all the crap I have gone through over the last couple of weeks I probably would have paid $100 just for freight alone to get it here quick.
The pump was AUD 48.14 Shipping & Handling: AUD 61.24
I am feeling confident in it.
Looks like it was the last one too. If it is correct I can let everyone know.....stay tuned.
Next up is an Oil Pump for a G150 (also suits the G130 and G180)........anyone got any links for new ones?? please
|
Wed Jan 21, 2015 6:22 am |
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am Posts: 2823 Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
redback wrote: Hey Glenn,
Australian $109.38 including freight - after all the crap I have gone through over the last couple of weeks I probably would have paid $100 just for freight alone to get it here quick.
The pump was AUD 48.14 Shipping & Handling: AUD 61.24
I am feeling confident in it.
Looks like it was the last one too. If it is correct I can let everyone know.....stay tuned.
Next up is an Oil Pump for a G150 (also suits the G130 and G180)........anyone got any links for new ones?? please thats a good price all up i think. After all, cant do much without it. I would imagine some of the modern pumps these days cost more than that
_________________ '72 PR60 Sport
|
Wed Jan 21, 2015 7:17 am |
|
|
1968GT
Joined: Tue Dec 23, 2008 2:32 am Posts: 1266 Location: MUDGEE. NSW
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
|
I back Glenn, Neil, looks correct to me when checked against the spare I have! Yes a bulk order would be cheaper and no doubt you would on sell them all with no problem! You would be
_________________ BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!
|
Wed Jan 21, 2015 10:52 pm |
|
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm Posts: 211 Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
Suddenly Amazon America has 200 searches for an isuzu water pump ... great score, looks right from here, good price considering how scarce,, shhhh Mark
|
Thu Jan 22, 2015 2:04 am |
|
|
Early GT
Joined: Sat Oct 30, 2010 5:37 am Posts: 265 Location: Gold Coast, Qld
Car(s): 1966 Bellett GT, 1968 Bellett GT, 2017 Subaru Levorg 2.0 GTS
|
I've watched them come up on yahoo Japan occasionally through Import Monster and pounced on them when I have needed one. They worked out at about $A170 including freight from Japan when I last bought one about mid 2013.
|
Thu Jan 22, 2015 9:45 am |
|
|
degruch
Joined: Mon Nov 24, 2008 7:50 am Posts: 774
Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
|
I paid $170 inc. postage for my repair kit, turned up missing a part.
Earlier I paid $75 inc. postage for the seal alone, turned up missing all parts except the ones missing from above.
Differences in the 5 water pumps/repair kits I had on hand meant some chopping and changing was required to rebuild the pump, with the addition of a new off-shelf Isuzu seal, it is now complete...hate to think what it has cost me all up.
I'm watching Yahoo also, will purchase a spare complete pump if I get the chance. Anything under $300 is a deal IMO.
PS: That pump looks pretty close, if not exact, RB.
|
Fri Jan 23, 2015 2:00 am |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
Damn it!!
Pump received and NOT correct......START AGAIN....SHEESH
Attachments:
IMG_1964.JPG [ 2.04 MiB | Viewed 47036 times ]
IMG_1963.JPG [ 1.82 MiB | Viewed 47036 times ]
|
Mon Jan 26, 2015 10:04 pm |
|
|
PR95
Joined: Tue Mar 24, 2009 11:52 am Posts: 843 Location: Sunshine Coast QLD
Car(s): PR95 PR20 WASP SWB NH Pajero Superchrged NT Pajero BF SR6 Falcon
|
That pump looks like it may be for 1800 OHC, which would fit the Chev luv motor in the Stat
|
Mon Jan 26, 2015 10:19 pm |
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am Posts: 428 Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
You got it in 1 1800 G180ss engine SOHC Cheers J
_________________
To increase the fun, add a hair dryer
|
Tue Jan 27, 2015 3:51 am |
|
|
CQGT
Joined: Sun Dec 12, 2010 10:04 am Posts: 386 Location: Boyne Island.Gladstone. Queenland
Car(s): '70 PR91,'69 PR20 x 2,'66 PR20,'65? KR20's x 2,'66 ? PR90,2012 d22 STR Navarra.
|
Neil.
Commiserations mate. The pics you brought up originally were correct. Comming from a Parts Guy I can understand the frustration you would have had when you got the incorrect pump. When I saw WP1001 in a Protex catalogue and not being home to check. [I was in Melbourne for a wedding last weekend], I thought the number is right. Started to read this post tonight and saw what happened, and pulled out my pump listings and sure enough, it was wrong. Also checked my stock of pumps and this confirmed my suspicions. I have 2 WP1001's for my convertible. WP1001 or PWP1001 is a pump to suit all SOHC engines. 1.6, 1.8, 2.0 litre. The GMB number is GWIS-14A or GWIS Y14A. There is NO WP number for the OHV engines available. This is a list of numbers that I know are correct as I have got or used. GWIS-13A, CP0319 or CP319 & 8943768640 (ISUZU). Hope this will help everybody Nationally and our International friends.
Dave.
_________________ CQGT. I'm the Dave with the convertible.
|
Fri Jan 30, 2015 12:43 pm |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
I GOT ONE!!!!!!!!
Okay I am pretty excited - but until I get the thing on Stinky I am not going to give everyone the low down on where and how much I spent on this thing.......I don't want to stuff you all around.
I am a bit busy at the moment preparing my Chopper for the Shannon's Motorcycle Extravaganza this weekend but I will try and tear myself away from polishing to whack this on sometime after work this week.
Check out the photos of it................(virgin inside plastic bags with gaskets!!!!!)
|
Mon Feb 09, 2015 12:57 am |
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am Posts: 428 Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
Oh you rippa Looks the goods Go on...... Give..... Are there any more???? Cheers J
_________________
To increase the fun, add a hair dryer
|
Mon Feb 09, 2015 8:12 am |
|
|
CQGT
Joined: Sun Dec 12, 2010 10:04 am Posts: 386 Location: Boyne Island.Gladstone. Queenland
Car(s): '70 PR91,'69 PR20 x 2,'66 PR20,'65? KR20's x 2,'66 ? PR90,2012 d22 STR Navarra.
|
Well done Redback. Can't wait for the info. My sources have given me a big NO. CAN"T DO. Rubbing hands in anticipation. Dave.
_________________ CQGT. I'm the Dave with the convertible.
|
Mon Feb 09, 2015 1:12 pm |
|
|
BULLITT
Joined: Mon Jan 10, 2011 1:03 pm Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
|
the package is in English not Japanese ..so was it a local supplier ???..come on mate leave that bike alone ..tell us ....
|
Mon Feb 09, 2015 1:51 pm |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
OKAY - sorry for the delay. I was in the middle of installing the water pump and our old dog Zara (16 year old maltese) had a stroke and had to rush her to the vets about 7.00pm Monday evening.......she is a bit wobbly on her legs but seems not be in any pain and not getting any worse at the moment - we have to stay beside her all this week and maybe into next week to see how she is hopefully progressing. Anyway back to the task at hand - pump is still half on Stinky but all seems to be well and good - I have NOT test run the motor yet but am very confident all will work as the factory designed. WHOOOHOOOOOO!!!! I purchased the water pump from summitracing.com the part number I used was GMB 140-1130 (a General Motors part number I think) for a Chev Luv..... Here is the link: http://www.summitracing.com/parts/gmb-140-1130These are US$45.97 each and about US$60- $90 postage depending on how quick you want it - mine was ordered on the 27th January and received on 9th February by DHL Express (I was very happy with paying extra to get it here quickly) This has been probably 3 years in the searching for me and I am glad to share with all of the Bellett.net family. Now go get them!!! Cheers, Neil Darwin
|
Tue Feb 10, 2015 9:52 pm |
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am Posts: 428 Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
Hi Neil Thanks for spilling the beans Happy you got the right pump........ I had a 'Live Chat' with Summitt in USA.....NO LONGER AVAILABLE Arrrrrrrrrrrrrrrrrrrr can you believe that
Best get yours gold plated
Cheers J
_________________
To increase the fun, add a hair dryer
|
Tue Feb 10, 2015 11:10 pm |
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm Posts: 528 Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
Wow so I got the LAST ONE..........ever??
|
Tue Feb 10, 2015 11:11 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|